Hello,
I can't seem to get my USB keyboard working. USB storage devices work fine. Does anyone have any suggestions on how to fix this? I've issued `usb start` and then `env set input serial,nc,usbkbd`
I'm running U-Boot 2014.07-rc1-15746-g3a56482 from the -imx tree.
The `usb tree` command shows: USB device tree: 1 Hub (480 Mb/s, 0mA) | u-boot EHCI Host Controller | +-2 Hub (480 Mb/s, 100mA) | USB2.0 Hub | +-3 Human Interface (1.5 Mb/s, 100mA) | Chicony Saitek Eclipse II Keyboard | +-4 Mass Storage (480 Mb/s, 200mA) | PNY USB 2.0 FD 020093054CD3693E | +-5 Vendor specific (480 Mb/s, 500mA) Realtek 802.11n NIC 00E04C0001
And the `usb info 3` command shows: config for device 3 3: Human Interface, USB Revision 2.0 - Chicony Saitek Eclipse II Keyboard - Class: (from Interface) Human Interface - PacketSize: 8 Configurations: 1 - Vendor: 0x06a3 Product 0x8021 Version 1.16 Configuration: 1 - Interfaces: 2 Bus Powered Remote Wakeup 100mA Interface: 0 - Alternate Setting 0, Endpoints: 1 - Class Human Interface, Subclass: Boot Keyboard - Endpoint 1 In Interrupt MaxPacket 8 Interval 10ms Interface: 1 - Alternate Setting 0, Endpoints: 1 - Class Human Interface, Subclass: None - Endpoint 2 In Interrupt MaxPacket 4 Interval 10ms
And the `coninfo` command shows: List of available devices: vga 80000002 S.O stdout stderr serial 80000003 SIO nulldev 80000003 SIO mxc_serial 00000003 .IO nc 80000003 SIO usbkbd 80000001 SI. stdin
And `usb start` shows: (Re)start USB... USB0: lowlevel init failed USB1: USB EHCI 1.00 scanning bus 1 for devices... 5 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found
I have: #define CONFIG_CONSOLE_MUX #define CONFIG_SYS_CONSOLE_IS_IN_ENV
/* USB Configs */ #define CONFIG_CMD_USB #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_MX6 #define CONFIG_USB_STORAGE #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */ #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) #define CONFIG_MXC_USB_FLAGS 0 #define CONFIG_USB_KEYBOARD