28 Sep
2016
28 Sep
'16
4:51 p.m.
Hi Jagan,
On 28/09/2016 16:40, Jagan Teki wrote:
I do not understand: do you copy SPL into the NAND ?
I booted through MMC first since it's only possible way to boot. And my plan is to write nand with MMC boot.
mmhh...I understand what is happening. You boot from MMC, and reading the src registers, this is the boot device. NAND is not selected, then.
I would say this is a strange configuration: you boot from MMC (and then, SPL and u-boot.img are on the MMC), or you boot from NAND, and bot SPL + u-boot.img are on NAND. In the last case, you have to write SPL according to the manual.
I find it it is taking boot image from MMC even if I set the NAND bootmode with MMC card pluged in. Anyway I cleared with this.
Best regards, Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================