Hi,
Did anybody face the issue which I am facing in building U-Boot for m501sk board from Artila.
I am getting following error.
arm-none-eabi-gcc -g -Os -fno-common -ffixed-r8 -msoft-float -D__KERNEL__ -DCONFIG_SYS_TEXT_BASE=0x21f00000 -I/media/disk/work/u-boot-2011.06_old2/include -fno-builtin -ffreestanding -nostdinc -isystem /home/sandeepk/CodeSourcery/Sourcery_G++_Lite/bin/../lib/gcc/arm-none-ea bi/4.5.2/include -pipe -DCONFIG_ARM -D__ARM__ -marm -mabi=aapcs-linux -mno-thumb-interwork -march=armv4 -Wall -Wstrict-prototypes -fno-stack-protector -o board.o board.c -c
board.c: In function '__dram_init_banksize':
board.c:233:29: error: 'CONFIG_SYS_SDRAM_BASE' undeclared (first use in this function)
board.c:233:29: note: each undeclared identifier is reported only once for each function it appears in
board.c: In function 'board_init_f':
board.c:276:18: error: 'CONFIG_SYS_INIT_SP_ADDR' undeclared (first use in this function)
board.c:309:9: error: 'CONFIG_SYS_SDRAM_BASE' undeclared (first use in this function)
make[1]: *** [board.o] Error 1
make[1]: Leaving directory `/media/disk/work/u-boot-2011.06_old2/arch/arm/lib'
make: *** [arch/arm/lib/libarm.o] Error 2
Regards,
Sandeep