Since spi rx mode macro's are renamed to simple and meaninfull, this patch will rename the respective structure members.
Cc: Simon Glass sjg@chromium.org Cc: Bin Meng bmeng.cn@gmail.com Cc: Michal Simek michal.simek@xilinx.com Cc: Siva Durga Prasad Paladugu sivadur@xilinx.com Tested-by: Mugunthan V N mugunthanvnm@ti.com Tested-by: Jagan Teki jteki@openedev.com Signed-off-by: Jagan Teki jteki@openedev.com --- drivers/mtd/spi/spi_flash.c | 2 +- drivers/spi/ich.c | 2 +- drivers/spi/ti_qspi.c | 2 +- include/spi.h | 6 +++--- 4 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c index 38ed115..691be1a 100644 --- a/drivers/mtd/spi/spi_flash.c +++ b/drivers/mtd/spi/spi_flash.c @@ -1098,7 +1098,7 @@ int spi_flash_scan(struct spi_flash *flash) flash->sector_size = flash->erase_size;
/* Look for the fastest read cmd */ - cmd = fls(params->e_rd_cmd & spi->op_mode_rx); + cmd = fls(params->e_rd_cmd & spi->mode_rx); if (cmd) { cmd = spi_read_cmds_array[cmd - 1]; flash->read_cmd = cmd; diff --git a/drivers/spi/ich.c b/drivers/spi/ich.c index 7f41763..59eaaea 100644 --- a/drivers/spi/ich.c +++ b/drivers/spi/ich.c @@ -752,7 +752,7 @@ static int ich_spi_child_pre_probe(struct udevice *dev) * and byte program command for SST flash */ if (plat->ich_version == 7) { - slave->op_mode_rx = SPI_RX_SLOW; + slave->mode_rx = SPI_RX_SLOW; slave->mode = SPI_TX_BYTE; }
diff --git a/drivers/spi/ti_qspi.c b/drivers/spi/ti_qspi.c index 366243c..26616eb 100644 --- a/drivers/spi/ti_qspi.c +++ b/drivers/spi/ti_qspi.c @@ -115,7 +115,7 @@ static void ti_spi_setup_spi_register(struct ti_qspi_slave *qslave) QSPI_SETUP0_NUM_D_BYTES_8_BITS | QSPI_SETUP0_READ_QUAD | QSPI_CMD_WRITE | QSPI_NUM_DUMMY_BITS); - slave->op_mode_rx = SPI_RX_QUAD; + slave->mode_rx = SPI_RX_QUAD; #else memval |= QSPI_CMD_READ | QSPI_SETUP0_NUM_A_BYTES | QSPI_SETUP0_NUM_D_BYTES_NO_BITS | diff --git a/include/spi.h b/include/spi.h index fd09502..8dabc3d 100644 --- a/include/spi.h +++ b/include/spi.h @@ -34,7 +34,7 @@ #define SPI_XFER_ONCE (SPI_XFER_BEGIN | SPI_XFER_END) #define SPI_XFER_U_PAGE (1 << 5)
-/* SPI RX operation modes */ +/* SPI mode_rx flags */ #define SPI_RX_SLOW (1 << 0) #define SPI_RX_FAST (1 << 1) #define SPI_RX_DUAL (1 << 2) @@ -99,7 +99,7 @@ struct dm_spi_slave_platdata { * bus (bus->seq) so does not need to be stored * @cs: ID of the chip select connected to the slave. * @mode: SPI mode to use for this slave (see SPI mode flags) - * @op_mode_rx: SPI RX operation mode. + * @mode_rx: SPI RX mode to use for this slave (see SPI mode_rx flags) * @wordlen: Size of SPI word in number of bits * @max_write_size: If non-zero, the maximum number of bytes which can * be written at once, excluding command bytes. @@ -117,7 +117,7 @@ struct spi_slave { unsigned int cs; #endif uint mode; - u8 op_mode_rx; + u8 mode_rx; unsigned int wordlen; unsigned int max_write_size; void *memory_map;