This commit adds support for Tanix TX6 TV box, based on H6. It's low end H6 board, with 3 GiB of RAM, eMMC, fast ethernet, USB, IR and other peripherals.
DT file is taken from Linux 5.11-rc1 release.
Signed-off-by: Jernej Skrabec jernej.skrabec@siol.net --- arch/arm/dts/Makefile | 3 +- arch/arm/dts/sun50i-h6-tanix-tx6.dts | 124 +++++++++++++++++++++++++++ board/sunxi/MAINTAINERS | 6 ++ 3 files changed, 132 insertions(+), 1 deletion(-) create mode 100644 arch/arm/dts/sun50i-h6-tanix-tx6.dts
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index fd47e408f826..e00aed1ec207 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -607,7 +607,8 @@ dtb-$(CONFIG_MACH_SUN50I_H6) += \ sun50i-h6-beelink-gs1.dtb \ sun50i-h6-orangepi-lite2.dtb \ sun50i-h6-orangepi-one-plus.dtb \ - sun50i-h6-pine-h64.dtb + sun50i-h6-pine-h64.dtb \ + sun50i-h6-tanix-tx6.dtb dtb-$(CONFIG_MACH_SUN50I) += \ sun50i-a64-amarula-relic.dtb \ sun50i-a64-bananapi-m64.dtb \ diff --git a/arch/arm/dts/sun50i-h6-tanix-tx6.dts b/arch/arm/dts/sun50i-h6-tanix-tx6.dts new file mode 100644 index 000000000000..be81330db14f --- /dev/null +++ b/arch/arm/dts/sun50i-h6-tanix-tx6.dts @@ -0,0 +1,124 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (c) 2019 Jernej Skrabec jernej.skrabec@siol.net + +/dts-v1/; + +#include "sun50i-h6.dtsi" +#include "sun50i-h6-cpu-opp.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Tanix TX6"; + compatible = "oranth,tanix-tx6", "allwinner,sun50i-h6"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + connector { + compatible = "hdmi-connector"; + ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */ + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + reg_vcc3v3: vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_vdd_cpu_gpu: vdd-cpu-gpu { + compatible = "regulator-fixed"; + regulator-name = "vdd-cpu-gpu"; + regulator-min-microvolt = <1135000>; + regulator-max-microvolt = <1135000>; + }; +}; + +&cpu0 { + cpu-supply = <®_vdd_cpu_gpu>; +}; + +&de { + status = "okay"; +}; + +&dwc3 { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci3 { + status = "okay"; +}; + +&gpu { + mali-supply = <®_vdd_cpu_gpu>; + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + vmmc-supply = <®_vcc3v3>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; + bus-width = <4>; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci3 { + status = "okay"; +}; + +&r_ir { + linux,rc-map-name = "rc-tanix-tx5max"; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_ph_pins>; + status = "okay"; +}; + +&usb2otg { + dr_mode = "host"; + status = "okay"; +}; + +&usb2phy { + status = "okay"; +}; + +&usb3phy { + status = "okay"; +}; diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS index d3755ae41a9d..1b37a9899edd 100644 --- a/board/sunxi/MAINTAINERS +++ b/board/sunxi/MAINTAINERS @@ -489,6 +489,12 @@ S: Maintained F: configs/Sunchip_CX-A99_defconfig W: https://linux-sunxi.org/Sunchip_CX-A99
+TANIX TX6 BOARD +M: Jernej Skrabec jernej.skrabec@siol.net +S: Maintained +F: configs/tanix_tx6_defconfig +W: https://linux-sunxi.org/Tanix_TX6 + TBS A711 BOARD M: Maxime Ripard mripard@kernel.org S: Maintained