Remove configuration of not unused pins, effectively leaving them in safe mode. --- board/omap3/pandora/pandora.h | 25 ------------------------- 1 files changed, 0 insertions(+), 25 deletions(-)
diff --git a/board/omap3/pandora/pandora.h b/board/omap3/pandora/pandora.h index 8f0838c..3d04b2a 100644 --- a/board/omap3/pandora/pandora.h +++ b/board/omap3/pandora/pandora.h @@ -107,15 +107,6 @@ const omap3_sysinfo sysinfo = { MUX_VAL(CP(GPMC_D15), (IEN | PTD | DIS | M0)) /*GPMC_D15*/\ MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0)) /*GPMC_nCS0*/\ MUX_VAL(CP(GPMC_NCS1), (IDIS | PTU | EN | M0)) /*GPMC_nCS1*/\ - MUX_VAL(CP(GPMC_NCS2), (IDIS | PTU | EN | M0)) /*GPMC_nCS2*/\ - MUX_VAL(CP(GPMC_NCS3), (IDIS | PTU | EN | M0)) /*GPMC_nCS3*/\ - MUX_VAL(CP(GPMC_NCS4), (IDIS | PTU | EN | M0))\ - MUX_VAL(CP(GPMC_NCS5), (IDIS | PTD | DIS | M0))\ - MUX_VAL(CP(GPMC_NCS6), (IEN | PTD | DIS | M1))\ - MUX_VAL(CP(GPMC_NCS7), (IEN | PTU | EN | M1))\ - MUX_VAL(CP(GPMC_NBE1), (IEN | PTD | DIS | M0))\ - MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M0))\ - MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M0))\ MUX_VAL(CP(GPMC_CLK), (IDIS | PTD | DIS | M0)) /*GPMC_CLK*/\ MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0)) /*GPMC_nADV_ALE*/\ MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0)) /*GPMC_nOE*/\ @@ -254,16 +245,10 @@ const omap3_sysinfo sysinfo = { MUX_VAL(CP(CAM_WEN), (IEN | PTU | DIS | M4)) /*GPIO_167*/\ /* - nIRQ_NUB2*/\ /*Various other stuff*/\ - MUX_VAL(CP(CAM_VS), (IEN | PTU | DIS | M4)) /*GPIO_95*/\ - /* - nTOUCH_BUSY*/\ MUX_VAL(CP(UART3_CTS_RCTX), (IEN | PTD | DIS | M4)) /*GPIO_163*/\ /* - nOC_USB5*/\ - MUX_VAL(CP(MCBSP1_CLKX), (IDIS | PTD | DIS | M4)) /*GPIO_162*/\ - /* - START_ADC*/\ MUX_VAL(CP(ETK_D8_ES2), (IEN | PTD | DIS | M4)) /*GPIO_22*/\ /* - MSECURE*/\ - MUX_VAL(CP(CAM_STROBE), (IEN | PTU | DIS | M4)) /*GPIO_126*/\ - /* - HP_DETECT*/\ /*External Resets and Enables*/\ MUX_VAL(CP(ETK_D0_ES2), (IDIS | PTD | DIS | M4)) /*GPIO_14*/\ /* - nHDPHN_SHUTDOWN*/\ @@ -277,14 +262,6 @@ const omap3_sysinfo sysinfo = { /* - RESET_NUBS*/\ MUX_VAL(CP(UART3_RTS_SD), (IDIS | PTU | EN | M4)) /*GPIO_164*/\ /* - EN_USB_5V*/\ - /*Unused*/\ - MUX_VAL(CP(HDQ_SIO), (IEN | PTU | EN | M0)) /*HDQ_SIO - NC*/\ - MUX_VAL(CP(CSI2_DX0), (IEN | PTD | DIS | M0)) /*CSI2_DX0 - NC*/\ - MUX_VAL(CP(CSI2_DY0), (IEN | PTD | DIS | M0)) /*CSI2_DY0 - NC*/\ - MUX_VAL(CP(CSI2_DX1), (IEN | PTD | DIS | M0)) /*CSI2_DX1 - NC*/\ - MUX_VAL(CP(CSI2_DY1), (IEN | PTD | DIS | M0)) /*CSI2_DY1 - NC*/\ - MUX_VAL(CP(I2C2_SCL), (IEN | PTU | EN | M0)) /*I2C2_SCL - NC*/\ - MUX_VAL(CP(I2C2_SDA), (IEN | PTU | EN | M0)) /*I2C2_SDA - NC*/\ /*HS USB OTG Port (connects to HSUSB0)*/\ MUX_VAL(CP(HSUSB0_CLK), (IEN | PTD | DIS | M0)) /*HSUSB0_CLK*/\ MUX_VAL(CP(HSUSB0_STP), (IDIS | PTU | EN | M0)) /*HSUSB0_STP*/\ @@ -338,8 +315,6 @@ const omap3_sysinfo sysinfo = { MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M4)) /*GPIO_7*/\ MUX_VAL(CP(SYS_BOOT6), (IEN | PTD | DIS | M4)) /*GPIO_8*/\ MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0)) /*SYS_OFF_MODE*/\ - MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M4)) /*SYS_CLKOUT1 - NC*/\ - MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTD | DIS | M4)) /*SYS_CLKOUT2 - NC*/\ /*JTAG*/\ MUX_VAL(CP(JTAG_nTRST), (IEN | PTD | DIS | M0)) /*JTAG_nTRST*/\ MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0)) /*JTAG_TCK*/\