DC3 nand node is not correct, it is showing all partitions under controller node directly. Create two sub nand nodes with partitions for each.
Signed-off-by: Ashok Reddy Soma ashok.reddy.soma@amd.com ---
arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts | 117 ++++++++++++++--------- 1 file changed, 70 insertions(+), 47 deletions(-)
diff --git a/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts b/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts index 13812470ae..8a06c2a90a 100644 --- a/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts +++ b/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts @@ -128,54 +128,77 @@ arasan,has-mdma; num-cs = <2>;
- partition@0 { /* for testing purpose */ - label = "nand-fsbl-uboot"; - reg = <0x0 0x0 0x400000>; + nand@0 { + reg = <0x0>; + #address-cells = <0x2>; + #size-cells = <0x1>; + nand-ecc-mode = "soft"; + nand-ecc-algo = "bch"; + nand-rb = <0>; + label = "main-storage-0"; + nand-ecc-step-size = <1024>; + nand-ecc-strength = <24>; + + partition@0 { /* for testing purpose */ + label = "nand-fsbl-uboot"; + reg = <0x0 0x0 0x400000>; + }; + partition@1 { /* for testing purpose */ + label = "nand-linux"; + reg = <0x0 0x400000 0x1400000>; + }; + partition@2 { /* for testing purpose */ + label = "nand-device-tree"; + reg = <0x0 0x1800000 0x400000>; + }; + partition@3 { /* for testing purpose */ + label = "nand-rootfs"; + reg = <0x0 0x1C00000 0x1400000>; + }; + partition@4 { /* for testing purpose */ + label = "nand-bitstream"; + reg = <0x0 0x3000000 0x400000>; + }; + partition@5 { /* for testing purpose */ + label = "nand-misc"; + reg = <0x0 0x3400000 0xFCC00000>; + }; }; - partition@1 { /* for testing purpose */ - label = "nand-linux"; - reg = <0x0 0x400000 0x1400000>; - }; - partition@2 { /* for testing purpose */ - label = "nand-device-tree"; - reg = <0x0 0x1800000 0x400000>; - }; - partition@3 { /* for testing purpose */ - label = "nand-rootfs"; - reg = <0x0 0x1C00000 0x1400000>; - }; - partition@4 { /* for testing purpose */ - label = "nand-bitstream"; - reg = <0x0 0x3000000 0x400000>; - }; - partition@5 { /* for testing purpose */ - label = "nand-misc"; - reg = <0x0 0x3400000 0xFCC00000>; - }; - - partition@6 { /* for testing purpose */ - label = "nand1-fsbl-uboot"; - reg = <0x1 0x0 0x400000>; - }; - partition@7 { /* for testing purpose */ - label = "nand1-linux"; - reg = <0x1 0x400000 0x1400000>; - }; - partition@8 { /* for testing purpose */ - label = "nand1-device-tree"; - reg = <0x1 0x1800000 0x400000>; - }; - partition@9 { /* for testing purpose */ - label = "nand1-rootfs"; - reg = <0x1 0x1C00000 0x1400000>; - }; - partition@10 { /* for testing purpose */ - label = "nand1-bitstream"; - reg = <0x1 0x3000000 0x400000>; - }; - partition@11 { /* for testing purpose */ - label = "nand1-misc"; - reg = <0x1 0x3400000 0xFCC00000>; + nand@1 { + reg = <0x1>; + #address-cells = <0x2>; + #size-cells = <0x1>; + nand-ecc-mode = "soft"; + nand-ecc-algo = "bch"; + nand-rb = <0>; + label = "main-storage-1"; + nand-ecc-step-size = <1024>; + nand-ecc-strength = <24>; + + partition@0 { /* for testing purpose */ + label = "nand1-fsbl-uboot"; + reg = <0x0 0x0 0x400000>; + }; + partition@1 { /* for testing purpose */ + label = "nand1-linux"; + reg = <0x0 0x400000 0x1400000>; + }; + partition@2 { /* for testing purpose */ + label = "nand1-device-tree"; + reg = <0x0 0x1800000 0x400000>; + }; + partition@3 { /* for testing purpose */ + label = "nand1-rootfs"; + reg = <0x0 0x1C00000 0x1400000>; + }; + partition@4 { /* for testing purpose */ + label = "nand1-bitstream"; + reg = <0x0 0x3000000 0x400000>; + }; + partition@5 { /* for testing purpose */ + label = "nand1-misc"; + reg = <0x0 0x3400000 0xFCC00000>; + }; }; };