Since set_control_reg is available in sdhci.c, use it and remove arasan_sdhci_set_control_reg().
Signed-off-by: Ashok Reddy Soma ashok.reddy.soma@xilinx.com Reviewed-by: Jaehoon Chung jh80.chung@samsung.com ---
(no changes since v1)
drivers/mmc/zynq_sdhci.c | 21 +-------------------- 1 file changed, 1 insertion(+), 20 deletions(-)
diff --git a/drivers/mmc/zynq_sdhci.c b/drivers/mmc/zynq_sdhci.c index 89776f48eb..73bb3abbc2 100644 --- a/drivers/mmc/zynq_sdhci.c +++ b/drivers/mmc/zynq_sdhci.c @@ -690,29 +690,10 @@ static void arasan_dt_parse_clk_phases(struct udevice *dev) "clk-phase-mmc-hs400"); }
-static void arasan_sdhci_set_control_reg(struct sdhci_host *host) -{ - struct mmc *mmc = (struct mmc *)host->mmc; - u32 reg; - - if (!IS_SD(mmc)) - return; - - if (mmc->signal_voltage == MMC_SIGNAL_VOLTAGE_180) { - reg = sdhci_readw(host, SDHCI_HOST_CONTROL2); - reg |= SDHCI_CTRL_VDD_180; - sdhci_writew(host, reg, SDHCI_HOST_CONTROL2); - } - - if (mmc->selected_mode > SD_HS && - mmc->selected_mode <= MMC_HS_200) - sdhci_set_uhs_timing(host); -} - static const struct sdhci_ops arasan_ops = { .platform_execute_tuning = &arasan_sdhci_execute_tuning, .set_delay = &arasan_sdhci_set_tapdelay, - .set_control_reg = &arasan_sdhci_set_control_reg, + .set_control_reg = &sdhci_set_control_reg, }; #endif