Hi Niklaus,
On Friday 02 October 2009 20:12:07 Niklaus Giger wrote:
The command "reginfo" got an overhaul for the ppc4xx. It dumps all the relevant HW configuration registers (address, symbolic name, content). This allows to easily detect errors in *.h files and changes in the HW configuration.
Thanks.
It is split in the following parts:
- Cleanup some HW register names: Here you find all the changes in the include directory for new register
names and adapting other ones to the names used by AMCC in their manuals, e.g. For 440EPx/GRPPC440EPx/GRX, Revision 1.15 ق September 22, 2008 For PPC405GP Embedded Processor, Revision 1.02 ق March 22, 2006 - Apply new HW register names Modify all existing *.c files to use the new register names
- Rework cmd reginfo Here the real work done to improve the reginfo command.
- respect 80-chars per line in ppc*.h files After running checkstyle.pl on the three previous patches I noted that in the *.h files there were a lot of long lines. This patch solves this
problem.
A general comment to all your 4 patches. Please put the description here also into the patches itself. This patch (0/4) won't be applied, so this information is lost.
I tested the changes on my PPC405GPr board HCU4 and PPC440EPx board HCU5.
Only ran MAKEALL 4xx as I have no other cross-compilers installed.
The DMA-registers are not dumped for the PPC440.
I know that I could spend not only many hours but weeks to cleanup all the PPC4xx register naming conventions.
Right, this is time consuming. Thanks for your effort so far. Really appretiated.
Cheers, Stefan
-- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office@denx.de