Enable validation of boot.scr script prior to its execution dependent on "secureboot" flag in environment. Disable fall back option to qspi boot in case of secure boot. Also enable "secureboot=y" flag in environment for ARM based platforms instead of bootcmd.
Signed-off-by: Sumit Garg sumit.garg@nxp.com Tested-by: Vinitha Pillai vinitha.pillai@nxp.com --- configs/ls1021atwr_nor_SECURE_BOOT_defconfig | 1 + .../ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig | 1 + include/configs/ls1021atwr.h | 40 ++++++++++++++++++++-- 3 files changed, 40 insertions(+), 2 deletions(-)
diff --git a/configs/ls1021atwr_nor_SECURE_BOOT_defconfig b/configs/ls1021atwr_nor_SECURE_BOOT_defconfig index 5b6ca22..9e1ab08 100644 --- a/configs/ls1021atwr_nor_SECURE_BOOT_defconfig +++ b/configs/ls1021atwr_nor_SECURE_BOOT_defconfig @@ -44,3 +44,4 @@ CONFIG_USB_STORAGE=y # CONFIG_VIDEO_SW_CURSOR is not set CONFIG_RSA=y CONFIG_SPL_RSA=y +CONFIG_DISTRO_DEFAULTS=y diff --git a/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig b/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig index 783787a..af9fb9c 100644 --- a/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig +++ b/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig @@ -59,3 +59,4 @@ CONFIG_USB_STORAGE=y # CONFIG_VIDEO_SW_CURSOR is not set CONFIG_RSA=y CONFIG_SPL_RSA=y +CONFIG_DISTRO_DEFAULTS=y diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index 43767de..810e2c8 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -393,6 +393,7 @@ "fdt_addr=0x64f00000\0" \ "kernel_addr=0x65000000\0" \ "scriptaddr=0x80000000\0" \ + "scripthdraddr=0x80080000\0" \ "fdtheader_addr_r=0x80100000\0" \ "kernelheader_addr_r=0x80200000\0" \ "kernel_addr_r=0x81000000\0" \ @@ -402,6 +403,7 @@ "kernel_size=0x2800000\0" \ BOOTENV \ "boot_scripts=ls1021atwr_boot.scr\0" \ + "boot_script_hdr=hdr_ls1021atwr_bs.out\0" \ "scan_dev_for_boot_part=" \ "part list ${devtype} ${devnum} devplist; " \ "env exists devplist || setenv devplist 1; " \ @@ -412,6 +414,21 @@ "run scan_dev_for_boot; " \ "fi; " \ "done\0" \ + "scan_dev_for_boot=" \ + "echo Scanning ${devtype} " \ + "${devnum}:${distro_bootpart}...; " \ + "for prefix in ${boot_prefixes}; do " \ + "run scan_dev_for_scripts; " \ + "done;" \ + "\0" \ + "boot_a_script=" \ + "load ${devtype} ${devnum}:${distro_bootpart} " \ + "${scriptaddr} ${prefix}${script}; " \ + "env exists secureboot && load ${devtype} " \ + "${devnum}:${distro_bootpart} " \ + "${scripthdraddr} ${prefix}${boot_script_hdr} " \ + "&& esbc_validate ${scripthdraddr};" \ + "source ${scriptaddr}\0" \ "installer=load mmc 0:2 $load_addr " \ "/flex_installer_arm32.itb; " \ "bootm $load_addr#ls1021atwr\0" \ @@ -429,6 +446,7 @@ "fdt_addr=0x64f00000\0" \ "kernel_addr=0x65000000\0" \ "scriptaddr=0x80000000\0" \ + "scripthdraddr=0x80080000\0" \ "fdtheader_addr_r=0x80100000\0" \ "kernelheader_addr_r=0x80200000\0" \ "kernel_addr_r=0x81000000\0" \ @@ -438,6 +456,7 @@ "kernel_size=0x2800000\0" \ BOOTENV \ "boot_scripts=ls1021atwr_boot.scr\0" \ + "boot_script_hdr=hdr_ls1021atwr_bs.out\0" \ "scan_dev_for_boot_part=" \ "part list ${devtype} ${devnum} devplist; " \ "env exists devplist || setenv devplist 1; " \ @@ -448,6 +467,21 @@ "run scan_dev_for_boot; " \ "fi; " \ "done\0" \ + "scan_dev_for_boot=" \ + "echo Scanning ${devtype} " \ + "${devnum}:${distro_bootpart}...; " \ + "for prefix in ${boot_prefixes}; do " \ + "run scan_dev_for_scripts; " \ + "done;" \ + "\0" \ + "boot_a_script=" \ + "load ${devtype} ${devnum}:${distro_bootpart} " \ + "${scriptaddr} ${prefix}${script}; " \ + "env exists secureboot && load ${devtype} " \ + "${devnum}:${distro_bootpart} " \ + "${scripthdraddr} ${prefix}${boot_script_hdr} " \ + "&& esbc_validate ${scripthdraddr};" \ + "source ${scriptaddr}\0" \ "installer=load mmc 0:2 $load_addr " \ "/flex_installer_arm32.itb; " \ "bootm $load_addr#ls1021atwr\0" \ @@ -461,9 +495,11 @@
#undef CONFIG_BOOTCOMMAND #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) -#define CONFIG_BOOTCOMMAND "run distro_bootcmd;run qspi_bootcmd" +#define CONFIG_BOOTCOMMAND "run distro_bootcmd; env exists secureboot" \ + "&& esbc_halt; run qspi_bootcmd;" #else -#define CONFIG_BOOTCOMMAND "run distro_bootcmd;run nor_bootcmd" +#define CONFIG_BOOTCOMMAND "run distro_bootcmd; env exists secureboot" \ + "&& esbc_halt; run nor_bootcmd;" #endif
#define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/ram0"