Hi
On 27/07/20 3:15 pm, Lokesh Vutla wrote:
j7200-evm has minor differences with j721e-evm based on the IPs available in the SoC. Introduce separate build targets for j7200-evm to incorporate the differences.
Signed-off-by: Lokesh Vutla lokeshvutla@ti.com
board/ti/j721e/Kconfig | 53 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 53 insertions(+)
diff --git a/board/ti/j721e/Kconfig b/board/ti/j721e/Kconfig index e56dc53bfa..2cbe2b2481 100644 --- a/board/ti/j721e/Kconfig +++ b/board/ti/j721e/Kconfig @@ -27,6 +27,26 @@ config TARGET_J721E_R5_EVM imply SYS_K3_SPL_ATF imply TI_I2C_BOARD_DETECT
+config TARGET_J7200_A72_EVM
- bool "TI K3 based J7200 EVM running on A72"
- select ARM64
- select SOC_K3_J721E
- select BOARD_LATE_INIT
- imply TI_I2C_BOARD_DETECT
- select SYS_DISABLE_DCACHE_OPS
I don't see update to:
include/configs/j721e_evm.h 23 #ifdef CONFIG_TARGET_J721E_A72_EVM include/configs/j721e_evm.h 130 #ifdef CONFIG_TARGET_J721E_A72_EVM
Don't we need to update j721e_evm.h with TARGET_J7200_A72_EVM?
Regards Vignesh
+config TARGET_J7200_R5_EVM
bool "TI K3 based J7200 EVM running on R5"
select CPU_V7R
select SYS_THUMB_BUILD
select SOC_K3_J721E
select K3_LOAD_SYSFW
select RAM
select SPL_RAM
select K3_J721E_DDRSS
imply SYS_K3_SPL_ATF
imply TI_I2C_BOARD_DETECT
endchoice
if TARGET_J721E_A72_EVM
@@ -61,3 +81,36 @@ config SPL_LDSCRIPT source "board/ti/common/Kconfig"
endif
+if TARGET_J7200_A72_EVM
+config SYS_BOARD
default "j721e"+config SYS_VENDOR
default "ti"+config SYS_CONFIG_NAME
default "j721e_evm"+source "board/ti/common/Kconfig"
+endif
+if TARGET_J7200_R5_EVM
+config SYS_BOARD
default "j721e"+config SYS_VENDOR
default "ti"+config SYS_CONFIG_NAME
default "j721e_evm"+config SPL_LDSCRIPT
- default "arch/arm/mach-omap2/u-boot-spl.lds"
+source "board/ti/common/Kconfig"
+endif