On 3/7/22 19:03, Pali Rohár wrote:
The Globalscale Technologies Sheevaplug board has the network chip Marvell 88E1116R. Use uclass mvgbe and the compatible driver M88E1310 driver to bring up Ethernet.
- Currently, CONFIG_RESET_PHY_R symbol is used in
arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board.
- Add board_eth_init() to use uclass mvgbe to bring up the network.
And remove ad-hoc code.
- Enable CONFIG_PHY_MARVELL to properly configure the network.
- Miscellaneous changes: Move constants to .c file and remove header file
board/Marvell/sheevaplug/sheevaplug.h, use BIT macro, and add/cleanup comments.
Signed-off-by: Tony Dinh mibodhi@gmail.com
Applied to u-boot-marvell/master
Thanks, Stefan
board/Marvell/sheevaplug/sheevaplug.c | 83 +++++---------------------- board/Marvell/sheevaplug/sheevaplug.h | 24 -------- configs/sheevaplug_defconfig | 1 + include/configs/sheevaplug.h | 17 +++--- 4 files changed, 22 insertions(+), 103 deletions(-) delete mode 100644 board/Marvell/sheevaplug/sheevaplug.h
diff --git a/board/Marvell/sheevaplug/sheevaplug.c b/board/Marvell/sheevaplug/sheev
Viele Grüße, Stefan Roese