Hi Tom,
On Fri, 16 Aug 2013 09:39:27 -0400, Tom Rini trini@ti.com wrote:
Hey,
The following changes since commit fdce7b633a1de24456226b18527cc7900c34282a:
gpio: omap5-uevm: Configure the tca6424 gpio expander (2013-07-30 09:21:42 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-ti.git master
for you to fetch changes up to 425faf74cd8189c87919f7e72a0101c684ee3b9f:
Add TI816X evm board support (2013-08-15 18:38:37 -0400)
Ash Charles (1): omap: overo: Use 200MHz SDRC timings for revision 1, 2 & 3 boards
Enric Balletbo i Serra (5): ARM: IGEP0033: Remove undef of CONFIG_CMD_MEMTEST ARM: IGEP0033: Remove CYGNUS name from header. ARM: IGEP0033: Add support to boot from NAND. ARM: IGEP0033: Remove duplicate / unused #defines. ARM: igep00x0.h: Enable the use of CMD_EXT4, CMD_FS_GENERIC and zImage.
Enric Balletbò i Serra (1): ARM: IGEP0033: Add support for Flattened Device Tree.
Heiko Schocher (5): ARM: AM33xx: Move s_init to a common place arm/davinci/da850: add uart0_pins_rtscts and RMII_MHz_50_CLK in emac_pins_rmii pinmux bootstage: get more BOOTSTAGE_ID* in show_boot_progress() arm, da850: enable the correct uart in arch_cpu_init() arm, da850: add ipam390 board support
Javier Martinez Canillas (1): OMAP3: igep00x0: allow booting with a FDT from MMC
Lokesh Vutla (9): ARM: AM33xx: Cleanup dplls data ARM: AM33xx: Cleanup clocks layer musb: Disable extra prints ARM: AM43xx: Add Board files ARM: AM43xx: Add header files ARM: AM43xx: clocks: Add dpll and clock data ARM: OMAP: Add CONFIG_OMAP_COMMON ARM: AM43xx: Add build support ARM: AM43xx: Add config file
Masahiro Yamada (1): ARM: omap24xx: remove remainders of dead board
Naumann Andreas (1): ARM: omap3: Implement dpll5 (HSUSB clk) workaround for OMAP36xx/AM/DM37xx according to errata sprz318e.
Steve Sakoman (1): omap: overo: update support for Micron 1GB POP
TENART Antoine (3): Prepare for TI816X : reuse existing code from TI814X Add TI816X support Add TI816X evm board support
Taras Kondratiuk (1): omap: emif: Set initial DDR PHY config first
Tom Rini (9): am33xx: CONFIG_DMA_COHERENT defines are unused, remove am33xx: Stop using PHYS_DRAM_1 define am335x_evm: Use default baud rate table arm: spl: For Falcon Mode, set a default machid of ~0 am335x_evm: Bring in 'boot_fdt' logic from i.MX TI:am33xx: Create common config files for TI ARMv7 platforms, and AM33xx TI:omap5/dra7xx: Convert to ti_armv7_common.h TI:armv7: Enable CONFIG_CMD_SPI TI:armv7: Enable CONFIG_CMD_GPIO
MAINTAINERS | 5 + Makefile | 2 +- arch/arm/config.mk | 2 +- arch/arm/cpu/arm1136/omap24xx/reset.S | 26 - arch/arm/cpu/arm1136/omap24xx/timer.c | 136 ------ arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c | 4 + arch/arm/cpu/arm926ejs/davinci/da850_pinmux.c | 6 + arch/arm/cpu/armv7/Makefile | 2 +- arch/arm/cpu/armv7/am33xx/Makefile | 7 + arch/arm/cpu/armv7/am33xx/board.c | 68 ++- arch/arm/cpu/armv7/am33xx/clock.c | 171 +++++++ arch/arm/cpu/armv7/am33xx/clock_am33xx.c | 495 +++++--------------- arch/arm/cpu/armv7/am33xx/clock_am43xx.c | 110 +++++ arch/arm/cpu/armv7/am33xx/clock_ti814x.c | 120 +---- arch/arm/cpu/armv7/am33xx/clock_ti816x.c | 445 ++++++++++++++++++ arch/arm/cpu/armv7/am33xx/emif4.c | 11 +- arch/arm/cpu/armv7/omap-common/Makefile | 2 +- arch/arm/cpu/armv7/omap-common/boot-common.c | 3 +- arch/arm/cpu/armv7/omap-common/emif-common.c | 2 +- arch/arm/cpu/armv7/omap3/clock.c | 20 +- arch/arm/cpu/armv7/omap3/lowlevel_init.S | 18 + arch/arm/include/asm/arch-am33xx/clock.h | 98 ++++ arch/arm/include/asm/arch-am33xx/clock_ti81xx.h | 142 ++++++ arch/arm/include/asm/arch-am33xx/clocks_am33xx.h | 6 +- arch/arm/include/asm/arch-am33xx/cpu.h | 164 ++++++- arch/arm/include/asm/arch-am33xx/ddr_defs.h | 35 +- arch/arm/include/asm/arch-am33xx/hardware.h | 18 +- arch/arm/include/asm/arch-am33xx/hardware_am33xx.h | 15 + arch/arm/include/asm/arch-am33xx/hardware_am43xx.h | 54 +++ arch/arm/include/asm/arch-am33xx/hardware_ti814x.h | 15 + arch/arm/include/asm/arch-am33xx/hardware_ti816x.h | 61 +++ arch/arm/include/asm/arch-am33xx/mmc_host_def.h | 3 + arch/arm/include/asm/arch-am33xx/mux.h | 4 + arch/arm/include/asm/arch-am33xx/mux_am43xx.h | 142 ++++++ arch/arm/include/asm/arch-am33xx/mux_ti816x.h | 363 ++++++++++++++ arch/arm/include/asm/arch-am33xx/omap.h | 11 +- arch/arm/include/asm/arch-am33xx/spl.h | 15 +- arch/arm/include/asm/arch-am33xx/sys_proto.h | 9 +- arch/arm/include/asm/arch-davinci/pinmux_defs.h | 3 +- arch/arm/include/asm/arch-omap3/clock.h | 1 + arch/arm/include/asm/arch-omap3/clocks_omap3.h | 22 + arch/arm/lib/spl.c | 7 +- .../omap24xx => board/Barix/ipam390}/Makefile | 22 +- board/Barix/ipam390/README.ipam390 | 229 +++++++++ board/Barix/ipam390/ipam390-ais-uart.cfg | 202 ++++++++ board/Barix/ipam390/ipam390.c | 348 ++++++++++++++ board/Barix/ipam390/u-boot-spl-ipam390.lds | 53 +++ board/isee/igep0033/board.c | 59 +-- board/isee/igep0033/board.h | 2 +- board/isee/igep00x0/igep00x0.c | 14 + board/overo/overo.c | 22 +- board/overo/overo.h | 1 + board/phytec/pcm051/board.c | 59 +-- board/ti/am335x/board.c | 104 ++-- board/ti/am335x/mux.c | 19 + board/ti/am43xx/Makefile | 38 ++ board/ti/am43xx/board.c | 57 +++ board/ti/am43xx/board.h | 17 + board/ti/am43xx/mux.c | 27 ++ board/ti/ti814x/evm.c | 67 +-- board/ti/ti816x/Makefile | 37 ++ board/ti/ti816x/evm.c | 229 +++++++++ boards.cfg | 3 + drivers/serial/ns16550.c | 5 +- drivers/usb/musb-new/musb_core.c | 20 +- include/bootstage.h | 1 + include/configs/am335x_evm.h | 258 ++-------- include/configs/am3517_crane.h | 1 + include/configs/am3517_evm.h | 1 + include/configs/am43xx_evm.h | 135 ++++++ include/configs/cm_t35.h | 1 + include/configs/devkit8000.h | 1 + include/configs/dig297.h | 1 + include/configs/dra7xx_evm.h | 11 +- include/configs/igep0033.h | 86 ++-- include/configs/igep00x0.h | 25 +- include/configs/ipam390.h | 331 +++++++++++++ include/configs/mcx.h | 1 + include/configs/nokia_rx51.h | 1 + include/configs/omap3_beagle.h | 1 + include/configs/omap3_evm_common.h | 1 + include/configs/omap3_logic.h | 1 + include/configs/omap3_mvblx.h | 1 + include/configs/omap3_overo.h | 1 + include/configs/omap3_pandora.h | 1 + include/configs/omap3_sdp3430.h | 1 + include/configs/omap3_zoom1.h | 1 + include/configs/omap3_zoom2.h | 1 + include/configs/omap4_common.h | 1 + include/configs/omap5_common.h | 191 ++------ include/configs/omap5_uevm.h | 8 +- include/configs/pcm051.h | 9 +- include/configs/tam3517-common.h | 1 + include/configs/ti814x_evm.h | 9 +- include/configs/ti816x_evm.h | 180 +++++++ include/configs/ti_am335x_common.h | 60 +++ include/configs/ti_armv7_common.h | 250 ++++++++++ include/configs/tricorder.h | 1 + spl/Makefile | 2 +- 99 files changed, 4633 insertions(+), 1419 deletions(-) delete mode 100644 arch/arm/cpu/arm1136/omap24xx/reset.S delete mode 100644 arch/arm/cpu/arm1136/omap24xx/timer.c create mode 100644 arch/arm/cpu/armv7/am33xx/clock.c create mode 100644 arch/arm/cpu/armv7/am33xx/clock_am43xx.c create mode 100644 arch/arm/cpu/armv7/am33xx/clock_ti816x.c create mode 100644 arch/arm/include/asm/arch-am33xx/clock_ti81xx.h create mode 100644 arch/arm/include/asm/arch-am33xx/hardware_am43xx.h create mode 100644 arch/arm/include/asm/arch-am33xx/hardware_ti816x.h create mode 100644 arch/arm/include/asm/arch-am33xx/mux_am43xx.h create mode 100644 arch/arm/include/asm/arch-am33xx/mux_ti816x.h rename {arch/arm/cpu/arm1136/omap24xx => board/Barix/ipam390}/Makefile (53%) create mode 100644 board/Barix/ipam390/README.ipam390 create mode 100644 board/Barix/ipam390/ipam390-ais-uart.cfg create mode 100644 board/Barix/ipam390/ipam390.c create mode 100644 board/Barix/ipam390/u-boot-spl-ipam390.lds create mode 100644 board/ti/am43xx/Makefile create mode 100644 board/ti/am43xx/board.c create mode 100644 board/ti/am43xx/board.h create mode 100644 board/ti/am43xx/mux.c create mode 100644 board/ti/ti816x/Makefile create mode 100644 board/ti/ti816x/evm.c create mode 100644 include/configs/am43xx_evm.h create mode 100644 include/configs/ipam390.h create mode 100644 include/configs/ti816x_evm.h create mode 100644 include/configs/ti_am335x_common.h create mode 100644 include/configs/ti_armv7_common.h
Applied to u-boot-arm/master, thanks -- BUT at the moment I cannot push to u-boot-arm at denx. While this gets solved, I have set up a temporary repo at 88.191.163.10. People can fetch it with
git fetch git://88.191.163.10/u-boot-arm
You won't have write access of course.
Amicalement,