15 Sep
2015
15 Sep
'15
3:48 a.m.
Hi Peng,
On Mon, Sep 14, 2015 at 9:31 PM, Peng Fan b51431@freescale.com wrote:
Hi Fabio, On Mon, Sep 14, 2015 at 03:09:24PM -0300, Fabio Estevam wrote:
Hi Peng,
On Mon, Sep 14, 2015 at 6:08 AM, Peng Fan Peng.Fan@freescale.com wrote:
Since i.MX7D does not support warm reset, so boot_mode_apply actually will not work. Also we use outer pmic reset and drop internal reset signal, so drop boot mode code for 7dsabresd board.
Booting via bmode is working fine here.
If boot from sd1, bmode sd1 work well. If boot from qspi1, bmode qspi work well. This is expected. If boot from qspi, but we use 'bmode sd1', this will not work.
Understood. I only booted from sd1 and did 'bmode sd1'.
Regards,
Fabio Estevam