According to specification, CFG_PM_RXDLOZ_WAIT should be set to 0x7 when reference clock is at 25 MHz. The specification (at least the version I have) does not mentoin the setting for 40 MHz reference clock, but Marvell's U-Boot sets 0xC in that case.
Signed-off-by: Marek Behun marek.behun@nic.cz --- drivers/phy/marvell/comphy_a3700.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-)
diff --git a/drivers/phy/marvell/comphy_a3700.c b/drivers/phy/marvell/comphy_a3700.c index b5f2013bbb..78caa96014 100644 --- a/drivers/phy/marvell/comphy_a3700.c +++ b/drivers/phy/marvell/comphy_a3700.c @@ -394,20 +394,18 @@ static int comphy_usb3_power_up(u32 lane, u32 type, u32 speed, u32 invert) /* * 3. Check crystal jumper setting and program the Power and PLL * Control accordingly + * 4. Change RX wait */ if (get_ref_clk() == 40) { /* 40 MHz */ usb3_reg_set16(PWR_PLL_CTRL, 0xFCA3, 0xFFFF); + usb3_reg_set16(PWR_MGM_TIM1, 0x10C, 0xFFFF); } else { /* 25 MHz */ usb3_reg_set16(PWR_PLL_CTRL, 0xFCA2, 0xFFFF); + usb3_reg_set16(PWR_MGM_TIM1, 0x107, 0xFFFF); }
- /* - * 4. Change RX wait - */ - usb3_reg_set16(PWR_MGM_TIM1, 0x10C, 0xFFFF); - /* * 5. Enable idle sync */