Now that the USB PHY on the Allwinner R40 SoC is supported, enable USB support for the two R40 boards U-Boot supports. For this we need to add the GPIO pin that powers the USB port(s), also enable the usual suspects (OHCI/EHCI support).
Signed-off-by: Andre Przywara andre.przywara@arm.com --- configs/Bananapi_M2_Ultra_defconfig | 4 ++++ configs/bananapi_m2_berry_defconfig | 4 ++++ 2 files changed, 8 insertions(+)
diff --git a/configs/Bananapi_M2_Ultra_defconfig b/configs/Bananapi_M2_Ultra_defconfig index 7a30dd7f7f..bbf931329c 100644 --- a/configs/Bananapi_M2_Ultra_defconfig +++ b/configs/Bananapi_M2_Ultra_defconfig @@ -19,4 +19,8 @@ CONFIG_SUN8I_EMAC=y CONFIG_AXP_DLDO4_VOLT=2500 CONFIG_AXP_ELDO3_VOLT=1200 CONFIG_SCSI=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB1_VBUS_PIN="PH23" +CONFIG_USB2_VBUS_PIN="PH23" CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/bananapi_m2_berry_defconfig b/configs/bananapi_m2_berry_defconfig index a97be06188..654974e47d 100644 --- a/configs/bananapi_m2_berry_defconfig +++ b/configs/bananapi_m2_berry_defconfig @@ -17,3 +17,7 @@ CONFIG_AXP_ELDO3_VOLT=1200 CONFIG_SCSI=y CONFIG_SUN8I_EMAC=y CONFIG_RGMII=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB1_VBUS_PIN="PH23" +CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y