It is wrong that expect phy init to also power on the PHY. Therefore, explicitly, call generic_phy_power_on() after generic_phy_power_init() in order to power on PHY before using it.
Signed-off-by: Vignesh R vigneshr@ti.com --- drivers/usb/host/xhci-dwc3.c | 12 ++++++++++++ 1 file changed, 12 insertions(+)
diff --git a/drivers/usb/host/xhci-dwc3.c b/drivers/usb/host/xhci-dwc3.c index 258d1cd00a08..cf1986bebd07 100644 --- a/drivers/usb/host/xhci-dwc3.c +++ b/drivers/usb/host/xhci-dwc3.c @@ -137,6 +137,12 @@ static int xhci_dwc3_probe(struct udevice *dev) pr_err("Can't init USB PHY for %s\n", dev->name); return ret; } + + ret = generic_phy_power_on(&plat->usb_phy); + if (ret) { + pr_err("Can't power on USB PHY for %s\n", dev->name); + return ret; + } }
dwc3_reg = (struct dwc3 *)((char *)(hccr) + DWC3_REG_OFFSET); @@ -159,6 +165,12 @@ static int xhci_dwc3_remove(struct udevice *dev) int ret;
if (generic_phy_valid(&plat->usb_phy)) { + ret = generic_phy_power_off(&plat->usb_phy); + if (ret) { + pr_err("Can't poweroff USB PHY for %s\n", dev->name); + return ret; + } + ret = generic_phy_exit(&plat->usb_phy); if (ret) { pr_err("Can't deinit USB PHY for %s\n", dev->name);