Dear ich,
In message 1312375799.4776.16.camel@debian you wrote:
I use u-boot U-Boot 1.3.1 - stm24_0054 for sh (Board mb411) (STLinux 2.4) It is no problem to boot with u-boot from flash at 0x000000.
Please note that U-Boot v1.3.1 is about 4 years old and as such no longer supported here.
But I have to install u-boot in another position in flash than 0x000000. I can also load the uboot from a u-boot loaded in RAM with jtag (with go 0xa0650000).
U-Boot is, in it's default configuration, designed to be run on a virgin CPU comingg fresh out of reset, so it naturally has to be installed at the reset vector of your processor. In addition to the start address, many parts of the initialization code expect to find a vorgin, uninitialized system. Such parts must be disabled when you want to change the conditions under which you want to run U-Boot.
Best regards,
Wolfgang Denk