13 Dec
2011
13 Dec
'11
8:13 p.m.
Hi Tom,
On 13.12.2011 22:52, Tom Rini wrote:
+#define CONFIG_SYS_TEXT_BASE 0x80008000
[snip]
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ +#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1 +#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img"
You're able to have CONFIG_SYS_TEXT_BASE that low and not have the corruption problem devkit8000 had?
No, I can't see any problems. I have to say I can't do _real_ MMC boot, as my board lacks the required jumper, so I'm testing it but starting SPL from NAND, rewriting omap3_boot_device to be MMC with BDI and running it further. It reads u-boot.img from MMC and starts it without any problem.
Regards, Ilya.