The DragonBoard 410c has proprietary firmware from Qualcomm that reserves 8 MiB of memory for tz/smem/hyp/rmtfs/rfsa from 0x86000000 to 0x86800000. I'm not aware of any ATF (ARM Trusted Firmware) port for DB410c that would reserve 30 MiB of memory at the end of RAM. I suspect the comment might have been copied from hikey.h which has a very similar comment (and which actually does have an ATF port).
Reducing the memory size just prevents U-Boot from using the end of the RAM, not the reserved region inbetween. Therefore we might as well display the correct DRAM size (1 GiB) instead of strange 986 MiB.
Fixes: 626f048bbc14 ("board: Add Qualcomm Dragonboard 410C support") Signed-off-by: Stephan Gerhold stephan@gerhold.net ---
include/configs/dragonboard410c.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/include/configs/dragonboard410c.h b/include/configs/dragonboard410c.h index 1f08508c4d..6474e57b29 100644 --- a/include/configs/dragonboard410c.h +++ b/include/configs/dragonboard410c.h @@ -16,8 +16,8 @@
/* Physical Memory Map */ #define PHYS_SDRAM_1 0x80000000 -/* 1008 MB (the last ~30Mb are secured for TrustZone by ATF*/ -#define PHYS_SDRAM_1_SIZE 0x3da00000 +/* Note: 8 MiB (0x86000000 - 0x86800000) are reserved for tz/smem/hyp/rmtfs/rfsa */ +#define PHYS_SDRAM_1_SIZE SZ_1G #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x80000)