On Wed, 07 Nov 2018 16:04:59 +0100 Marek Szyprowski m.szyprowski@samsung.com wrote:
This patch adds minimal support for Exynos5433 SoC (ARM64 based).
The following devices are supported:
- mmc0 (for eMMC)
- serial1 (for debug/console)
- gpa0..3 and gpb0..2 GPIO banks
Based on earlier work done by Lukasz Majewski l.majewski@samsung.com.
Signed-off-by: Marek Szyprowski m.szyprowski@samsung.com
arch/arm/cpu/armv8/Kconfig | 2 +- arch/arm/dts/exynos5433.dtsi | 84 ++++++++++++++++++++++++++++++++ arch/arm/mach-exynos/Kconfig | 7 +++ arch/arm/mach-exynos/mmu-arm64.c | 24 +++++++++ arch/arm/mach-exynos/soc.c | 3 ++ drivers/gpio/s5p_gpio.c | 1 + scripts/config_whitelist.txt | 1 + 7 files changed, 121 insertions(+), 1 deletion(-) create mode 100644 arch/arm/dts/exynos5433.dtsi
diff --git a/arch/arm/cpu/armv8/Kconfig b/arch/arm/cpu/armv8/Kconfig index c8bebabdf6..295cdd4653 100644 --- a/arch/arm/cpu/armv8/Kconfig +++ b/arch/arm/cpu/armv8/Kconfig @@ -96,7 +96,7 @@ endmenu config PSCI_RESET bool "Use PSCI for reset and shutdown" default y
- depends on !ARCH_EXYNOS7 && !ARCH_BCM283X && \
- depends on !ARCH_EXYNOS5433 && !ARCH_EXYNOS7
&& !ARCH_BCM283X && \ !TARGET_LS2080A_SIMU && !TARGET_LS2080AQDS && \ !TARGET_LS2080ARDB && !TARGET_LS2080A_EMU && \ !TARGET_LS1088ARDB && !TARGET_LS1088AQDS && \ diff --git a/arch/arm/dts/exynos5433.dtsi b/arch/arm/dts/exynos5433.dtsi new file mode 100644 index 0000000000..509b39a95f --- /dev/null +++ b/arch/arm/dts/exynos5433.dtsi @@ -0,0 +1,84 @@ +/*
- SAMSUNG EXYNOS5433 SoC device tree source
- Copyright (c) 2018 Samsung Electronics Co., Ltd.
http://www.samsung.com
- SPDX-License-Identifier: GPL-2.0+
Has this file been took from the Linux kernel?
If yes, please provide SHA1 from master (in the commit message).
- */
+/dts-v1/; +#include "skeleton.dtsi"
+/ {
- mmc_0: mmc@15540000 {
compatible = "samsung,exynos-dwmmc";reg = <0x0 0x15540000 0x0 0x1000>;samsung,bus-width = <8>;samsung,timing = <1 3 3>;samsung,removable = <0>;samsung,pre-init;fifoth_val = <0x201f0020>;status = "disabled";- };
- pinctrl_alive: pinctrl@10580000 {
compatible = "samsung,exynos5433-pinctrl";reg = <0x10580000 0x1a20>, <0x11090000 0x100>;/* gpa0..3, gpf1..5 */gpa0: gpa0 {gpio-controller;#gpio-cells = <2>;};gpa1: gpa1 {gpio-controller;#gpio-cells = <2>;};gpa2: gpa2 {gpio-controller;#gpio-cells = <2>;};gpa3: gpa3 {gpio-controller;#gpio-cells = <2>;};- };
- pinctrl_peric: pinctrl@14cc0000 {
compatible = "samsung,exynos5433-pinctrl";reg = <0x14cc0000 0x1100>;/* gpv7, gpb0, gpc0..3, gpg0, gpd0..4,6,8,7, gpg1..3*/ +
gpv7: gpv7 {gpio-controller;#gpio-cells = <2>;};gpb0: gpb0 {gpio-controller;#gpio-cells = <2>;};gpb1: gpb1 {gpio-controller;#gpio-cells = <2>;};gpb2: gpb2 {gpio-controller;#gpio-cells = <2>;};- };
- serial_1: serial@14c20000 {
compatible = "samsung,exynos4210-uart";reg = <0x14c20000 0x100>;id = <1>;status = "disabled";- };
+}; diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index ed04369cfa..4a49c8dcc2 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -29,6 +29,13 @@ config ARCH_EXYNOS5 Cortex-A7 CPU in big.LITTLE configuration). There are multiple SoCs in this family including Exynos5250, Exynos5420 and Exynos5800. +config ARCH_EXYNOS5433
- bool "Exynos5433 SoC family"
- select ARM64
- help
Samsung Exynos5433 SoC family are based on ARM Cortex-A57CPU and
Cortex-A53 CPU (in a big.LITTLE configuration).config ARCH_EXYNOS7 bool "Exynos7 SoC family" select ARM64 diff --git a/arch/arm/mach-exynos/mmu-arm64.c b/arch/arm/mach-exynos/mmu-arm64.c index 46b8169d19..a857a7318e 100644 --- a/arch/arm/mach-exynos/mmu-arm64.c +++ b/arch/arm/mach-exynos/mmu-arm64.c @@ -29,3 +29,27 @@ static struct mm_region exynos7420_mem_map[] = {
struct mm_region *mem_map = exynos7420_mem_map; #endif
+#ifdef CONFIG_EXYNOS5433 +static struct mm_region exynos5433_mem_map[] = {
- {
.virt = 0x00000000UL,.phys = 0x00000000UL,.size = 0x20000000UL,.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |PTE_BLOCK_NON_SHARE |PTE_BLOCK_PXN | PTE_BLOCK_UXN- }, {
.virt = 0x20000000UL,.phys = 0x20000000UL,.size = 0xC0000000UL,.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |PTE_BLOCK_INNER_SHARE- }, {
/* List terminator */0,- }
+};
+struct mm_region *mem_map = exynos5433_mem_map; +#endif diff --git a/arch/arm/mach-exynos/soc.c b/arch/arm/mach-exynos/soc.c index 589e16c5ad..215cbb8f70 100644 --- a/arch/arm/mach-exynos/soc.c +++ b/arch/arm/mach-exynos/soc.c @@ -23,6 +23,9 @@ void reset_cpu(ulong addr) #ifdef CONFIG_CPU_V7A writel(0x1, samsung_get_base_swreset()); #endif +#ifdef CONFIG_ARCH_EXYNOS5433
- writel(0x1, (void *)0x105C0400);
Please provide either #define for it or explain this magic value in a (verbose) comment.
+#endif }
#ifndef CONFIG_SYS_DCACHE_OFF diff --git a/drivers/gpio/s5p_gpio.c b/drivers/gpio/s5p_gpio.c index e4b5383d0f..fcaad1c4a6 100644 --- a/drivers/gpio/s5p_gpio.c +++ b/drivers/gpio/s5p_gpio.c @@ -357,6 +357,7 @@ static const struct udevice_id exynos_gpio_ids[] = { { .compatible = "samsung,exynos4x12-pinctrl" }, { .compatible = "samsung,exynos5250-pinctrl" }, { .compatible = "samsung,exynos5420-pinctrl" },
- { .compatible = "samsung,exynos5433-pinctrl" }, { }
};
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index 94c0f1ff82..6438686fc4 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -571,6 +571,7 @@ CONFIG_EXYNOS4210 CONFIG_EXYNOS5 CONFIG_EXYNOS5250 CONFIG_EXYNOS5420 +CONFIG_EXYNOS5433
The config_writelist.txt is to prevent from adding new CONFIG_* options to include/configs/<myboard>.h
The CONFIG_EXYNOS5433 shall be added to a proper Kconfig
CONFIG_EXYNOS5_DT CONFIG_EXYNOS7420 CONFIG_EXYNOS_ACE_SHA
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma@denx.de