The MXC_*_UCTRL_*PM_BIT bits are available only on i.MX51.
Signed-off-by: Benoît Thébaudeau benoit.thebaudeau@advansee.com Cc: Marek Vasut marex@denx.de Cc: Stefano Babic sbabic@denx.de --- Changes for v2: None. Changes for v3: None.
.../drivers/usb/host/ehci-mx5.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
diff --git u-boot-usb-76454b2.orig/drivers/usb/host/ehci-mx5.c u-boot-usb-76454b2/drivers/usb/host/ehci-mx5.c index 8c1b70a..4f4b98a 100644 --- u-boot-usb-76454b2.orig/drivers/usb/host/ehci-mx5.c +++ u-boot-usb-76454b2/drivers/usb/host/ehci-mx5.c @@ -160,10 +160,12 @@ int mxc_set_usbcontrol(int port, unsigned int flags) MXC_USB_PHY_CTR_FUNC_OFFSET);
v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET); +#ifdef CONFIG_MX51 if (flags & MXC_EHCI_POWER_PINS_ENABLED) v &= ~MXC_OTG_UCTRL_OPM_BIT; else v |= MXC_OTG_UCTRL_OPM_BIT; +#endif __raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET); } break; @@ -177,10 +179,12 @@ int mxc_set_usbcontrol(int port, unsigned int flags) #endif
v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET); +#ifdef CONFIG_MX51 if (flags & MXC_EHCI_POWER_PINS_ENABLED) v &= ~MXC_H1_UCTRL_H1PM_BIT; /* H1 power mask unused */ else v |= MXC_H1_UCTRL_H1PM_BIT; /* H1 power mask used */ +#endif __raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET);
v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET); @@ -193,11 +197,12 @@ int mxc_set_usbcontrol(int port, unsigned int flags) break; case 2: /* Host 2 ULPI */ v = __raw_readl(usbother_base + MXC_USBH2CTRL_OFFSET); +#ifdef CONFIG_MX51 if (flags & MXC_EHCI_POWER_PINS_ENABLED) v &= ~MXC_H2_UCTRL_H2PM_BIT; /* H2 power mask unused */ else v |= MXC_H2_UCTRL_H2PM_BIT; /* H2 power mask used */ - +#endif __raw_writel(v, usbother_base + MXC_USBH2CTRL_OFFSET); break; }