On Thu, May 4, 2017 at 12:11 PM, Jagan Teki jagan@openedev.com wrote:
From: Jagan Teki jagan@amarulasolutions.com
Enable DM_I2C, DM_PMIC and DM_PMIC_PFUZE100 for dt supported sabresd config board
I2C Log:
=> i2c bus Bus 0: i2c@021a0000 Bus 1: i2c@021a4000 08: pfuze100@08, offset len 1, flags 0 Bus 2: i2c@021a8000 => i2c dev 1 Setting bus to 1 => i2c speed 100000 Setting bus speed to 100000 Hz => i2c probe Valid chip addresses: 08 48 => i2c md 08 0x0 0x20 0000: 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 ................ 0010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ => i2c md 48 0x0 0x20 0000: 00 f0 00 00 00 00 00 00 00 00 00 80 70 41 41 41 ............pAAA 0010: 00 00 00 80 70 41 41 41 41 41 41 41 41 41 41 41 ....pAAAAAAAAAAA
Cc: Stefano Babic sbabic@denx.de Cc: Fabio Estevam fabio.estevam@nxp.com Cc: Michael Trimarchi michael@amarulasolutions.com Signed-off-by: Jagan Teki jagan@amarulasolutions.com
Reviewed-by: Fabio Estevam fabio.estevam@nxp.com