The current macro is a misnomer since it does not declare a device directly. Instead, it declares driver_info record which U-Boot uses at runtime to create a device.
The distinction seems somewhat minor most of the time, but is becomes quite confusing when we actually want to declare a device, with of-platdata. We are left trying to distinguish between a device which isn't actually device, and a device that is (perhaps an 'instance'?)
It seems better to rename this macro to describe what it actually is. The macros is not widely used, since boards should use devicetree to declare devices.
Rename it to U_BOOT_DRVINFO(), which indicates clearly that this is declaring a new driver_info record, not a device.
Signed-off-by: Simon Glass sjg@chromium.org ---
.../mach-at91/arm926ejs/at91sam9260_devices.c | 2 +- .../arm926ejs/at91sam9m10g45_devices.c | 2 +- arch/arm/mach-imx/mx6/soc.c | 2 +- arch/arm/mach-imx/mx7/soc.c | 2 +- arch/arm/mach-lpc32xx/devices.c | 4 +- arch/arm/mach-omap2/am33xx/board.c | 10 +-- arch/arm/mach-omap2/omap3/board.c | 2 +- arch/arm/mach-tegra/board.c | 2 +- arch/arm/mach-tegra/board2.c | 2 +- board/armltd/integrator/integrator.c | 2 +- board/armltd/total_compute/total_compute.c | 2 +- board/armltd/vexpress64/vexpress64.c | 2 +- board/bluewater/gurnard/gurnard.c | 2 +- board/bluewater/snapper9260/snapper9260.c | 2 +- board/cadence/xtfpga/xtfpga.c | 4 +- board/cavium/thunderx/thunderx.c | 4 +- board/compulab/cm_fx6/cm_fx6.c | 2 +- board/davinci/da8xxevm/omapl138_lcdk.c | 4 +- board/freescale/ls1012afrdm/eth.c | 4 +- board/freescale/ls1012aqds/eth.c | 4 +- board/freescale/ls1012ardb/eth.c | 4 +- board/freescale/lx2160a/lx2160a.c | 4 +- board/gateworks/gw_ventana/gw_ventana.c | 2 +- board/hisilicon/hikey/hikey.c | 4 +- board/hisilicon/hikey960/hikey960.c | 2 +- board/hisilicon/poplar/poplar.c | 2 +- board/isee/igep00x0/igep00x0.c | 2 +- board/lg/sniper/sniper.c | 2 +- board/nokia/rx51/rx51.c | 2 +- board/sandbox/sandbox.c | 2 +- board/siemens/corvus/board.c | 2 +- board/st/stv0991/stv0991.c | 2 +- board/sysam/amcore/amcore.c | 2 +- board/ti/am335x/board.c | 6 +- board/timll/devkit8000/devkit8000.c | 2 +- board/toradex/apalis_imx6/apalis_imx6.c | 2 +- .../toradex/colibri-imx6ull/colibri-imx6ull.c | 2 +- board/toradex/colibri_imx6/colibri_imx6.c | 2 +- board/toradex/colibri_pxa270/colibri_pxa270.c | 4 +- doc/driver-model/design.rst | 18 ++--- doc/driver-model/of-plat.rst | 12 ++-- doc/driver-model/remoteproc-framework.rst | 2 +- doc/driver-model/spi-howto.rst | 4 +- drivers/crypto/fsl/fsl_rsa.c | 2 +- drivers/crypto/rsa_mod_exp/mod_exp_sw.c | 2 +- drivers/demo/demo-pdata.c | 10 +-- drivers/gpio/imx_rgpio2p.c | 4 +- drivers/gpio/mxc_gpio.c | 2 +- drivers/remoteproc/sandbox_testproc.c | 2 +- drivers/rtc/emul_rtc.c | 2 +- drivers/serial/sandbox.c | 2 +- drivers/sysreset/sysreset_sandbox.c | 4 +- drivers/timer/sandbox_timer.c | 2 +- drivers/video/sunxi/sunxi_de2.c | 2 +- drivers/video/sunxi/sunxi_dw_hdmi.c | 2 +- drivers/video/sunxi/sunxi_lcd.c | 2 +- dts/Kconfig | 8 +-- include/dm/device.h | 4 +- include/dm/lists.h | 2 +- include/dm/platdata.h | 16 ++--- include/dm/platform_data/spi_pl022.h | 2 +- test/dm/core.c | 6 +- tools/dtoc/dtb_platdata.py | 8 +-- tools/dtoc/test_dtoc.py | 66 +++++++++---------- 64 files changed, 148 insertions(+), 148 deletions(-)
diff --git a/arch/arm/mach-at91/arm926ejs/at91sam9260_devices.c b/arch/arm/mach-at91/arm926ejs/at91sam9260_devices.c index 9d787197f35..c10571fa28a 100644 --- a/arch/arm/mach-at91/arm926ejs/at91sam9260_devices.c +++ b/arch/arm/mach-at91/arm926ejs/at91sam9260_devices.c @@ -219,7 +219,7 @@ static const struct at91_port_plat at91sam9260_plat[] = { { ATMEL_BASE_PIOC, "PC" }, };
-U_BOOT_DEVICES(at91sam9260_gpios) = { +U_BOOT_DRVINFOS(at91sam9260_gpios) = { { "atmel_at91rm9200_gpio", &at91sam9260_plat[0] }, { "atmel_at91rm9200_gpio", &at91sam9260_plat[1] }, { "atmel_at91rm9200_gpio", &at91sam9260_plat[2] }, diff --git a/arch/arm/mach-at91/arm926ejs/at91sam9m10g45_devices.c b/arch/arm/mach-at91/arm926ejs/at91sam9m10g45_devices.c index f503553b926..d517810c991 100644 --- a/arch/arm/mach-at91/arm926ejs/at91sam9m10g45_devices.c +++ b/arch/arm/mach-at91/arm926ejs/at91sam9m10g45_devices.c @@ -175,7 +175,7 @@ static const struct at91_port_plat at91sam9260_plat[] = { { ATMEL_BASE_PIOE, "PE" }, };
-U_BOOT_DEVICES(at91sam9260_gpios) = { +U_BOOT_DRVINFOS(at91sam9260_gpios) = { { "atmel_at91rm9200_gpio", &at91sam9260_plat[0] }, { "atmel_at91rm9200_gpio", &at91sam9260_plat[1] }, { "atmel_at91rm9200_gpio", &at91sam9260_plat[2] }, diff --git a/arch/arm/mach-imx/mx6/soc.c b/arch/arm/mach-imx/mx6/soc.c index 1649f6d9480..bf6dddfdc9d 100644 --- a/arch/arm/mach-imx/mx6/soc.c +++ b/arch/arm/mach-imx/mx6/soc.c @@ -44,7 +44,7 @@ static const struct imx_thermal_plat imx6_thermal_plat = { .fuse_word = 6, };
-U_BOOT_DEVICE(imx6_thermal) = { +U_BOOT_DRVINFO(imx6_thermal) = { .name = "imx_thermal", .plat = &imx6_thermal_plat, }; diff --git a/arch/arm/mach-imx/mx7/soc.c b/arch/arm/mach-imx/mx7/soc.c index 13593994f14..fda25ba66a3 100644 --- a/arch/arm/mach-imx/mx7/soc.c +++ b/arch/arm/mach-imx/mx7/soc.c @@ -60,7 +60,7 @@ static const struct imx_thermal_plat imx7_thermal_plat = { .fuse_word = 3, };
-U_BOOT_DEVICE(imx7_thermal) = { +U_BOOT_DRVINFO(imx7_thermal) = { .name = "imx_thermal", .plat = &imx7_thermal_plat, }; diff --git a/arch/arm/mach-lpc32xx/devices.c b/arch/arm/mach-lpc32xx/devices.c index 04e026a8b77..e1e2e0d0949 100644 --- a/arch/arm/mach-lpc32xx/devices.c +++ b/arch/arm/mach-lpc32xx/devices.c @@ -62,7 +62,7 @@ static const struct lpc32xx_hsuart_plat lpc32xx_hsuart[] = { }; #endif
-U_BOOT_DEVICES(lpc32xx_uarts) = { +U_BOOT_DRVINFOS(lpc32xx_uarts) = { #if defined(CONFIG_LPC32XX_HSUART) { "lpc32xx_hsuart", &lpc32xx_hsuart[0], }, { "lpc32xx_hsuart", &lpc32xx_hsuart[1], }, @@ -124,7 +124,7 @@ void lpc32xx_i2c_init(unsigned int devnum) writel(ctrl, &clk->i2cclk_ctrl); }
-U_BOOT_DEVICE(lpc32xx_gpios) = { +U_BOOT_DRVINFO(lpc32xx_gpios) = { .name = "gpio_lpc32xx" };
diff --git a/arch/arm/mach-omap2/am33xx/board.c b/arch/arm/mach-omap2/am33xx/board.c index b5f2b75e244..e17898d8fbf 100644 --- a/arch/arm/mach-omap2/am33xx/board.c +++ b/arch/arm/mach-omap2/am33xx/board.c @@ -99,7 +99,7 @@ static const struct ns16550_plat am33xx_serial[] = { # endif };
-U_BOOT_DEVICES(am33xx_uarts) = { +U_BOOT_DRVINFOS(am33xx_uarts) = { { "ns16550_serial", &am33xx_serial[0] }, # ifdef CONFIG_SYS_NS16550_COM2 { "ns16550_serial", &am33xx_serial[1] }, @@ -119,7 +119,7 @@ static const struct omap_i2c_plat am33xx_i2c[] = { { I2C_BASE3, 100000, OMAP_I2C_REV_V2}, };
-U_BOOT_DEVICES(am33xx_i2c) = { +U_BOOT_DRVINFOS(am33xx_i2c) = { { "i2c_omap", &am33xx_i2c[0] }, { "i2c_omap", &am33xx_i2c[1] }, { "i2c_omap", &am33xx_i2c[2] }, @@ -138,7 +138,7 @@ static const struct omap_gpio_plat am33xx_gpio[] = { #endif };
-U_BOOT_DEVICES(am33xx_gpios) = { +U_BOOT_DRVINFOS(am33xx_gpios) = { { "gpio_omap", &am33xx_gpio[0] }, { "gpio_omap", &am33xx_gpio[1] }, { "gpio_omap", &am33xx_gpio[2] }, @@ -155,7 +155,7 @@ static const struct omap3_spi_plat omap3_spi_pdata = { .pin_dir = MCSPI_PINDIR_D0_IN_D1_OUT, };
-U_BOOT_DEVICE(am33xx_spi) = { +U_BOOT_DRVINFO(am33xx_spi) = { .name = "omap3_spi", .plat = &omap3_spi_pdata, }; @@ -234,7 +234,7 @@ static struct ti_musb_plat usb1 = { }, };
-U_BOOT_DEVICES(am33xx_usbs) = { +U_BOOT_DRVINFOS(am33xx_usbs) = { #if CONFIG_AM335X_USB0_MODE == MUSB_PERIPHERAL { "ti-musb-peripheral", &usb0 }, #elif CONFIG_AM335X_USB0_MODE == MUSB_HOST diff --git a/arch/arm/mach-omap2/omap3/board.c b/arch/arm/mach-omap2/omap3/board.c index 6ffedd1769f..4da8df47cc6 100644 --- a/arch/arm/mach-omap2/omap3/board.c +++ b/arch/arm/mach-omap2/omap3/board.c @@ -47,7 +47,7 @@ static const struct omap_gpio_plat omap34xx_gpio[] = { { 5, OMAP34XX_GPIO6_BASE }, };
-U_BOOT_DEVICES(omap34xx_gpios) = { +U_BOOT_DRVINFOS(omap34xx_gpios) = { { "gpio_omap", &omap34xx_gpio[0] }, { "gpio_omap", &omap34xx_gpio[1] }, { "gpio_omap", &omap34xx_gpio[2] }, diff --git a/arch/arm/mach-tegra/board.c b/arch/arm/mach-tegra/board.c index bf01aa5ee8f..9de9836c8d2 100644 --- a/arch/arm/mach-tegra/board.c +++ b/arch/arm/mach-tegra/board.c @@ -264,7 +264,7 @@ static struct ns16550_plat ns16550_com1_pdata = { .fcr = UART_FCR_DEFVAL, };
-U_BOOT_DEVICE(ns16550_com1) = { +U_BOOT_DRVINFO(ns16550_com1) = { "ns16550_serial", &ns16550_com1_pdata }; #endif diff --git a/arch/arm/mach-tegra/board2.c b/arch/arm/mach-tegra/board2.c index 48c4f32d6f9..8569ad7c6fc 100644 --- a/arch/arm/mach-tegra/board2.c +++ b/arch/arm/mach-tegra/board2.c @@ -42,7 +42,7 @@ DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_SPL_BUILD /* TODO(sjg@chromium.org): Remove once SPL supports device tree */ -U_BOOT_DEVICE(tegra_gpios) = { +U_BOOT_DRVINFO(tegra_gpios) = { "gpio_tegra" }; #endif diff --git a/board/armltd/integrator/integrator.c b/board/armltd/integrator/integrator.c index 21bea62e9b7..3c56fa1c019 100644 --- a/board/armltd/integrator/integrator.c +++ b/board/armltd/integrator/integrator.c @@ -43,7 +43,7 @@ static const struct pl01x_serial_plat serial_plat = { #endif };
-U_BOOT_DEVICE(integrator_serials) = { +U_BOOT_DRVINFO(integrator_serials) = { .name = "serial_pl01x", .plat = &serial_plat, }; diff --git a/board/armltd/total_compute/total_compute.c b/board/armltd/total_compute/total_compute.c index 6263d0c3612..da24b32333b 100644 --- a/board/armltd/total_compute/total_compute.c +++ b/board/armltd/total_compute/total_compute.c @@ -15,7 +15,7 @@ static const struct pl01x_serial_plat serial_plat = { .clock = CONFIG_PL011_CLOCK, };
-U_BOOT_DEVICE(total_compute_serials) = { +U_BOOT_DRVINFO(total_compute_serials) = { .name = "serial_pl01x", .plat = &serial_plat, }; diff --git a/board/armltd/vexpress64/vexpress64.c b/board/armltd/vexpress64/vexpress64.c index 6df6bcd3cf5..bd66d52cb7b 100644 --- a/board/armltd/vexpress64/vexpress64.c +++ b/board/armltd/vexpress64/vexpress64.c @@ -26,7 +26,7 @@ static const struct pl01x_serial_plat serial_plat = { .clock = CONFIG_PL011_CLOCK, };
-U_BOOT_DEVICE(vexpress_serials) = { +U_BOOT_DRVINFO(vexpress_serials) = { .name = "serial_pl01x", .plat = &serial_plat, }; diff --git a/board/bluewater/gurnard/gurnard.c b/board/bluewater/gurnard/gurnard.c index a71b4eb7339..17ecdb679e1 100644 --- a/board/bluewater/gurnard/gurnard.c +++ b/board/bluewater/gurnard/gurnard.c @@ -420,7 +420,7 @@ static struct atmel_serial_plat at91sam9260_serial_plat = { .base_addr = ATMEL_BASE_DBGU, };
-U_BOOT_DEVICE(at91sam9260_serial) = { +U_BOOT_DRVINFO(at91sam9260_serial) = { .name = "serial_atmel", .plat = &at91sam9260_serial_plat, }; diff --git a/board/bluewater/snapper9260/snapper9260.c b/board/bluewater/snapper9260/snapper9260.c index 9e41a42263d..58fab15c112 100644 --- a/board/bluewater/snapper9260/snapper9260.c +++ b/board/bluewater/snapper9260/snapper9260.c @@ -147,7 +147,7 @@ static struct atmel_serial_plat at91sam9260_serial_plat = { .base_addr = ATMEL_BASE_DBGU, };
-U_BOOT_DEVICE(at91sam9260_serial) = { +U_BOOT_DRVINFO(at91sam9260_serial) = { .name = "serial_atmel", .plat = &at91sam9260_serial_plat, }; diff --git a/board/cadence/xtfpga/xtfpga.c b/board/cadence/xtfpga/xtfpga.c index 29db51b0260..c26793d76cc 100644 --- a/board/cadence/xtfpga/xtfpga.c +++ b/board/cadence/xtfpga/xtfpga.c @@ -93,7 +93,7 @@ int misc_init_r(void) return 0; }
-U_BOOT_DEVICE(sysreset) = { +U_BOOT_DRVINFO(sysreset) = { .name = "xtfpga_sysreset", };
@@ -104,7 +104,7 @@ static struct ethoc_eth_pdata ethoc_pdata = { .packet_base = CONFIG_SYS_ETHOC_BUFFER_ADDR, };
-U_BOOT_DEVICE(ethoc) = { +U_BOOT_DRVINFO(ethoc) = { .name = "ethoc", .plat = ðoc_pdata, }; diff --git a/board/cavium/thunderx/thunderx.c b/board/cavium/thunderx/thunderx.c index 22c4c72361e..fd234728980 100644 --- a/board/cavium/thunderx/thunderx.c +++ b/board/cavium/thunderx/thunderx.c @@ -25,7 +25,7 @@ static const struct pl01x_serial_plat serial0 = { .skip_init = true, };
-U_BOOT_DEVICE(thunderx_serial0) = { +U_BOOT_DRVINFO(thunderx_serial0) = { .name = "serial_pl01x", .plat = &serial0, }; @@ -37,7 +37,7 @@ static const struct pl01x_serial_plat serial1 = { .skip_init = true, };
-U_BOOT_DEVICE(thunderx_serial1) = { +U_BOOT_DRVINFO(thunderx_serial1) = { .name = "serial_pl01x", .plat = &serial1, }; diff --git a/board/compulab/cm_fx6/cm_fx6.c b/board/compulab/cm_fx6/cm_fx6.c index bc3ce4d16c9..7520e96e078 100644 --- a/board/compulab/cm_fx6/cm_fx6.c +++ b/board/compulab/cm_fx6/cm_fx6.c @@ -728,7 +728,7 @@ static struct mxc_serial_plat cm_fx6_mxc_serial_plat = { .reg = (struct mxc_uart *)UART4_BASE, };
-U_BOOT_DEVICE(cm_fx6_serial) = { +U_BOOT_DRVINFO(cm_fx6_serial) = { .name = "serial_mxc", .plat = &cm_fx6_mxc_serial_plat, }; diff --git a/board/davinci/da8xxevm/omapl138_lcdk.c b/board/davinci/da8xxevm/omapl138_lcdk.c index a8ece170ce3..a08858550d4 100644 --- a/board/davinci/da8xxevm/omapl138_lcdk.c +++ b/board/davinci/da8xxevm/omapl138_lcdk.c @@ -363,7 +363,7 @@ static const struct ns16550_plat serial_pdata = { .fcr = UART_FCR_DEFVAL, };
-U_BOOT_DEVICE(omapl138_uart) = { +U_BOOT_DRVINFO(omapl138_uart) = { .name = "ns16550_serial", .plat = &serial_pdata, }; @@ -379,7 +379,7 @@ static const struct davinci_mmc_plat mmc_plat = { .name = "da830-mmc", }, }; -U_BOOT_DEVICE(omapl138_mmc) = { +U_BOOT_DRVINFO(omapl138_mmc) = { .name = "ti_da830_mmc", .plat = &mmc_plat, }; diff --git a/board/freescale/ls1012afrdm/eth.c b/board/freescale/ls1012afrdm/eth.c index 85104ab22c8..d2df9351eac 100644 --- a/board/freescale/ls1012afrdm/eth.c +++ b/board/freescale/ls1012afrdm/eth.c @@ -114,12 +114,12 @@ static struct pfe_eth_pdata pfe_pdata1 = { }, };
-U_BOOT_DEVICE(ls1012a_pfe0) = { +U_BOOT_DRVINFO(ls1012a_pfe0) = { .name = "pfe_eth", .plat = &pfe_pdata0, };
-U_BOOT_DEVICE(ls1012a_pfe1) = { +U_BOOT_DRVINFO(ls1012a_pfe1) = { .name = "pfe_eth", .plat = &pfe_pdata1, }; diff --git a/board/freescale/ls1012aqds/eth.c b/board/freescale/ls1012aqds/eth.c index f6f43d2b137..8189f41becb 100644 --- a/board/freescale/ls1012aqds/eth.c +++ b/board/freescale/ls1012aqds/eth.c @@ -298,12 +298,12 @@ static struct pfe_eth_pdata pfe_pdata1 = { }, };
-U_BOOT_DEVICE(ls1012a_pfe0) = { +U_BOOT_DRVINFO(ls1012a_pfe0) = { .name = "pfe_eth", .plat = &pfe_pdata0, };
-U_BOOT_DEVICE(ls1012a_pfe1) = { +U_BOOT_DRVINFO(ls1012a_pfe1) = { .name = "pfe_eth", .plat = &pfe_pdata1, }; diff --git a/board/freescale/ls1012ardb/eth.c b/board/freescale/ls1012ardb/eth.c index 5e923e52527..2241d061dd8 100644 --- a/board/freescale/ls1012ardb/eth.c +++ b/board/freescale/ls1012ardb/eth.c @@ -160,12 +160,12 @@ static struct pfe_eth_pdata pfe_pdata1 = { }, };
-U_BOOT_DEVICE(ls1012a_pfe0) = { +U_BOOT_DRVINFO(ls1012a_pfe0) = { .name = "pfe_eth", .plat = &pfe_pdata0, };
-U_BOOT_DEVICE(ls1012a_pfe1) = { +U_BOOT_DRVINFO(ls1012a_pfe1) = { .name = "pfe_eth", .plat = &pfe_pdata1, }; diff --git a/board/freescale/lx2160a/lx2160a.c b/board/freescale/lx2160a/lx2160a.c index 8d0115eace4..70dd34e7cee 100644 --- a/board/freescale/lx2160a/lx2160a.c +++ b/board/freescale/lx2160a/lx2160a.c @@ -62,7 +62,7 @@ static struct pl01x_serial_plat serial0 = { .type = TYPE_PL011, };
-U_BOOT_DEVICE(nxp_serial0) = { +U_BOOT_DRVINFO(nxp_serial0) = { .name = "serial_pl01x", .plat = &serial0, }; @@ -72,7 +72,7 @@ static struct pl01x_serial_plat serial1 = { .type = TYPE_PL011, };
-U_BOOT_DEVICE(nxp_serial1) = { +U_BOOT_DRVINFO(nxp_serial1) = { .name = "serial_pl01x", .plat = &serial1, }; diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c index c7224d1efe3..048f624c352 100644 --- a/board/gateworks/gw_ventana/gw_ventana.c +++ b/board/gateworks/gw_ventana/gw_ventana.c @@ -1375,7 +1375,7 @@ static struct mxc_serial_plat ventana_mxc_serial_plat = { .reg = (struct mxc_uart *)UART2_BASE, };
-U_BOOT_DEVICE(ventana_serial) = { +U_BOOT_DRVINFO(ventana_serial) = { .name = "serial_mxc", .plat = &ventana_mxc_serial_plat, }; diff --git a/board/hisilicon/hikey/hikey.c b/board/hisilicon/hikey/hikey.c index 0ac88306d09..65a8179adbf 100644 --- a/board/hisilicon/hikey/hikey.c +++ b/board/hisilicon/hikey/hikey.c @@ -50,7 +50,7 @@ static const struct hikey_gpio_plat hi6220_gpio[] = {
};
-U_BOOT_DEVICES(hi6220_gpios) = { +U_BOOT_DRVINFOS(hi6220_gpios) = { { "gpio_hi6220", &hi6220_gpio[0] }, { "gpio_hi6220", &hi6220_gpio[1] }, { "gpio_hi6220", &hi6220_gpio[2] }, @@ -89,7 +89,7 @@ static const struct pl01x_serial_plat serial_plat = { .clock = 19200000 };
-U_BOOT_DEVICE(hikey_seriala) = { +U_BOOT_DRVINFO(hikey_seriala) = { .name = "serial_pl01x", .plat = &serial_plat, }; diff --git a/board/hisilicon/hikey960/hikey960.c b/board/hisilicon/hikey960/hikey960.c index 04b8cde1363..3fe4c60d02e 100644 --- a/board/hisilicon/hikey960/hikey960.c +++ b/board/hisilicon/hikey960/hikey960.c @@ -32,7 +32,7 @@ static const struct pl01x_serial_plat serial_plat = { .clock = 19200000 };
-U_BOOT_DEVICE(hikey960_serial0) = { +U_BOOT_DRVINFO(hikey960_serial0) = { .name = "serial_pl01x", .plat = &serial_plat, }; diff --git a/board/hisilicon/poplar/poplar.c b/board/hisilicon/poplar/poplar.c index b8be4ce45a6..bfb2c66a17a 100644 --- a/board/hisilicon/poplar/poplar.c +++ b/board/hisilicon/poplar/poplar.c @@ -46,7 +46,7 @@ static const struct pl01x_serial_plat serial_plat = { .clock = 75000000, };
-U_BOOT_DEVICE(poplar_serial) = { +U_BOOT_DRVINFO(poplar_serial) = { .name = "serial_pl01x", .plat = &serial_plat, }; diff --git a/board/isee/igep00x0/igep00x0.c b/board/isee/igep00x0/igep00x0.c index 6a7da502dda..0932f62b9be 100644 --- a/board/isee/igep00x0/igep00x0.c +++ b/board/isee/igep00x0/igep00x0.c @@ -36,7 +36,7 @@ static const struct ns16550_plat igep_serial = { .fcr = UART_FCR_DEFVAL, };
-U_BOOT_DEVICE(igep_uart) = { +U_BOOT_DRVINFO(igep_uart) = { "ns16550_serial", &igep_serial }; diff --git a/board/lg/sniper/sniper.c b/board/lg/sniper/sniper.c index d11630b9543..118ab269d6f 100644 --- a/board/lg/sniper/sniper.c +++ b/board/lg/sniper/sniper.c @@ -37,7 +37,7 @@ static const struct ns16550_plat serial_omap_plat = { .fcr = UART_FCR_DEFVAL, };
-U_BOOT_DEVICE(sniper_serial) = { +U_BOOT_DRVINFO(sniper_serial) = { .name = "ns16550_serial", .plat = &serial_omap_plat }; diff --git a/board/nokia/rx51/rx51.c b/board/nokia/rx51/rx51.c index bafb6205bd8..253ee3c7b29 100644 --- a/board/nokia/rx51/rx51.c +++ b/board/nokia/rx51/rx51.c @@ -709,7 +709,7 @@ static const struct omap_i2c_plat rx51_i2c[] = { { I2C_BASE3, 400000, OMAP_I2C_REV_V1 }, };
-U_BOOT_DEVICES(rx51_i2c) = { +U_BOOT_DRVINFOS(rx51_i2c) = { { "i2c_omap", &rx51_i2c[0] }, { "i2c_omap", &rx51_i2c[1] }, { "i2c_omap", &rx51_i2c[2] }, diff --git a/board/sandbox/sandbox.c b/board/sandbox/sandbox.c index 3235541a7d5..d152703b154 100644 --- a/board/sandbox/sandbox.c +++ b/board/sandbox/sandbox.c @@ -23,7 +23,7 @@ gd_t *gd;
#if !CONFIG_IS_ENABLED(OF_PLATDATA) /* Add a simple GPIO device */ -U_BOOT_DEVICE(gpio_sandbox) = { +U_BOOT_DRVINFO(gpio_sandbox) = { .name = "sandbox_gpio", }; #endif diff --git a/board/siemens/corvus/board.c b/board/siemens/corvus/board.c index 1613c449294..25d85a8f170 100644 --- a/board/siemens/corvus/board.c +++ b/board/siemens/corvus/board.c @@ -318,7 +318,7 @@ static struct atmel_serial_plat at91sam9260_serial_plat = { .base_addr = ATMEL_BASE_DBGU, };
-U_BOOT_DEVICE(at91sam9260_serial) = { +U_BOOT_DRVINFO(at91sam9260_serial) = { .name = "serial_atmel", .plat = &at91sam9260_serial_plat, }; diff --git a/board/st/stv0991/stv0991.c b/board/st/stv0991/stv0991.c index 3371973600a..95e203ff0ea 100644 --- a/board/st/stv0991/stv0991.c +++ b/board/st/stv0991/stv0991.c @@ -30,7 +30,7 @@ static const struct pl01x_serial_plat serial_plat = { .clock = 2700 * 1000, };
-U_BOOT_DEVICE(stv09911_serials) = { +U_BOOT_DRVINFO(stv09911_serials) = { .name = "serial_pl01x", .plat = &serial_plat, }; diff --git a/board/sysam/amcore/amcore.c b/board/sysam/amcore/amcore.c index 42e1a80ec5f..65fc60e2b46 100644 --- a/board/sysam/amcore/amcore.c +++ b/board/sysam/amcore/amcore.c @@ -113,7 +113,7 @@ static struct coldfire_serial_plat mcf5307_serial_plat = { .baudrate = CONFIG_BAUDRATE, };
-U_BOOT_DEVICE(coldfire_serial) = { +U_BOOT_DRVINFO(coldfire_serial) = { .name = "serial_coldfire", .plat = &mcf5307_serial_plat, }; diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c index 2aa385a937b..40d2e0238fd 100644 --- a/board/ti/am335x/board.c +++ b/board/ti/am335x/board.c @@ -927,7 +927,7 @@ struct eth_pdata cpsw_pdata = { .priv_pdata = &am335_eth_data, };
-U_BOOT_DEVICE(am335x_eth) = { +U_BOOT_DRVINFO(am335x_eth) = { .name = "eth_cpsw", .plat = &cpsw_pdata, }; @@ -972,7 +972,7 @@ static const struct omap_hsmmc_plat am335x_mmc0_plat = { .cfg.b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT, };
-U_BOOT_DEVICE(am335x_mmc0) = { +U_BOOT_DRVINFO(am335x_mmc0) = { .name = "omap_hsmmc", .plat = &am335x_mmc0_plat, }; @@ -986,7 +986,7 @@ static const struct omap_hsmmc_plat am335x_mmc1_plat = { .cfg.b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT, };
-U_BOOT_DEVICE(am335x_mmc1) = { +U_BOOT_DRVINFO(am335x_mmc1) = { .name = "omap_hsmmc", .plat = &am335x_mmc1_plat, }; diff --git a/board/timll/devkit8000/devkit8000.c b/board/timll/devkit8000/devkit8000.c index 875383625d4..0731fb76456 100644 --- a/board/timll/devkit8000/devkit8000.c +++ b/board/timll/devkit8000/devkit8000.c @@ -54,7 +54,7 @@ static const struct ns16550_plat devkit8000_serial = { .fcr = UART_FCR_DEFVAL, };
-U_BOOT_DEVICE(devkit8000_uart) = { +U_BOOT_DRVINFO(devkit8000_uart) = { "ns16550_serial", &devkit8000_serial }; diff --git a/board/toradex/apalis_imx6/apalis_imx6.c b/board/toradex/apalis_imx6/apalis_imx6.c index 362a750b199..5ae5274584a 100644 --- a/board/toradex/apalis_imx6/apalis_imx6.c +++ b/board/toradex/apalis_imx6/apalis_imx6.c @@ -1149,7 +1149,7 @@ static struct mxc_serial_plat mxc_serial_plat = { .use_dte = true, };
-U_BOOT_DEVICE(mxc_serial) = { +U_BOOT_DRVINFO(mxc_serial) = { .name = "serial_mxc", .plat = &mxc_serial_plat, }; diff --git a/board/toradex/colibri-imx6ull/colibri-imx6ull.c b/board/toradex/colibri-imx6ull/colibri-imx6ull.c index 056064f6b97..6ff55ce57b9 100644 --- a/board/toradex/colibri-imx6ull/colibri-imx6ull.c +++ b/board/toradex/colibri-imx6ull/colibri-imx6ull.c @@ -208,7 +208,7 @@ static struct mxc_serial_plat mxc_serial_plat = { .use_dte = 1, };
-U_BOOT_DEVICE(mxc_serial) = { +U_BOOT_DRVINFO(mxc_serial) = { .name = "serial_mxc", .plat = &mxc_serial_plat, }; diff --git a/board/toradex/colibri_imx6/colibri_imx6.c b/board/toradex/colibri_imx6/colibri_imx6.c index a82daad7395..57d3e526b4c 100644 --- a/board/toradex/colibri_imx6/colibri_imx6.c +++ b/board/toradex/colibri_imx6/colibri_imx6.c @@ -1091,7 +1091,7 @@ static struct mxc_serial_plat mxc_serial_plat = { .use_dte = true, };
-U_BOOT_DEVICE(mxc_serial) = { +U_BOOT_DRVINFO(mxc_serial) = { .name = "serial_mxc", .plat = &mxc_serial_plat, }; diff --git a/board/toradex/colibri_pxa270/colibri_pxa270.c b/board/toradex/colibri_pxa270/colibri_pxa270.c index b9d0fb98af3..645751a37ec 100644 --- a/board/toradex/colibri_pxa270/colibri_pxa270.c +++ b/board/toradex/colibri_pxa270/colibri_pxa270.c @@ -133,7 +133,7 @@ static const struct pxa_mmc_plat mmc_plat = { .base = (struct pxa_mmc_regs *)MMC0_BASE, };
-U_BOOT_DEVICE(pxa_mmcs) = { +U_BOOT_DRVINFO(pxa_mmcs) = { .name = "pxa_mmc", .plat = &mmc_plat, }; @@ -146,7 +146,7 @@ static const struct pxa_serial_plat serial_plat = { .baudrate = CONFIG_BAUDRATE, };
-U_BOOT_DEVICE(pxa_serials) = { +U_BOOT_DRVINFO(pxa_serials) = { .name = "serial_pxa", .plat = &serial_plat, }; diff --git a/doc/driver-model/design.rst b/doc/driver-model/design.rst index f26e4f14df0..ffed7d5f79a 100644 --- a/doc/driver-model/design.rst +++ b/doc/driver-model/design.rst @@ -422,7 +422,7 @@ Device Tree
While plat is useful, a more flexible way of providing device data is by using device tree. In U-Boot you should use this where possible. Avoid -sending patches which make use of the U_BOOT_DEVICE() macro unless strictly +sending patches which make use of the U_BOOT_DRVINFO() macro unless strictly necessary.
With device tree we replace the above code with the following device tree @@ -436,7 +436,7 @@ fragment: sides = <4>; };
-This means that instead of having lots of U_BOOT_DEVICE() declarations in +This means that instead of having lots of U_BOOT_DRVINFO() declarations in the board file, we put these in the device tree. This approach allows a lot more generality, since the same board file can support many types of boards (e,g. with the same SoC) just by using different device trees. An added @@ -665,9 +665,9 @@ Bind stage
U-Boot discovers devices using one of these two methods:
-- Scan the U_BOOT_DEVICE() definitions. U-Boot looks up the name specified +- Scan the U_BOOT_DRVINFO() definitions. U-Boot looks up the name specified by each, to find the appropriate U_BOOT_DRIVER() definition. In this case, - there is no path by which driver_data may be provided, but the U_BOOT_DEVICE() + there is no path by which driver_data may be provided, but the U_BOOT_DRVINFO() may provide plat.
- Scan through the device tree definitions. U-Boot looks at top-level @@ -685,7 +685,7 @@ driver's bind() method if one is defined. At this point all the devices are known, and bound to their drivers. There is a 'struct udevice' allocated for all devices. However, nothing has been activated (except for the root device). Each bound device that was created -from a U_BOOT_DEVICE() declaration will hold the plat pointer specified +from a U_BOOT_DRVINFO() declaration will hold the plat pointer specified in that declaration. For a bound device created from the device tree, plat will be NULL, but of_offset will be the offset of the device tree node that caused the device to be created. The uclass is set correctly for @@ -726,7 +726,7 @@ The steps are: 2. If plat_auto is non-zero, then the platform data space is allocated. This is only useful for device tree operation, since otherwise you would have to specific the platform data in the - U_BOOT_DEVICE() declaration. The space is allocated for the device and + U_BOOT_DRVINFO() declaration. The space is allocated for the device and zeroed. It will be accessible as dev->plat.
3. If the device's uclass specifies a non-zero per_device_auto, @@ -746,7 +746,7 @@ The steps are: do various calls like dev_read_u32(dev, ...) to access the node and store the resulting information into dev->plat. After this point, the device works the same way whether it was bound using a device tree node or - U_BOOT_DEVICE() structure. In either case, the platform data is now stored + U_BOOT_DRVINFO() structure. In either case, the platform data is now stored in the plat structure. Typically you will use the plat_auto feature to specify the size of the platform data structure, and U-Boot will automatically allocate and zero it for you before @@ -855,7 +855,7 @@ remove it. This performs the probe steps in reverse: 4. The device memory is freed (platform data, private data, uclass data, parent data).
- Note: Because the platform data for a U_BOOT_DEVICE() is defined with a + Note: Because the platform data for a U_BOOT_DRVINFO() is defined with a static pointer, it is not de-allocated during the remove() method. For a device instantiated using the device tree data, the platform data will be dynamically allocated, and thus needs to be deallocated during the @@ -931,7 +931,7 @@ property can provide better control granularity on which device is bound before relocation. While with DM_FLAG_PRE_RELOC flag of the driver all devices with the same driver are bound, which requires allocation a large amount of memory. When device tree is not used, DM_FLAG_PRE_RELOC is the -only way for statically declared devices via U_BOOT_DEVICE() to be bound +only way for statically declared devices via U_BOOT_DRVINFO() to be bound prior to relocation.
It is possible to limit this to specific relocation steps, by using diff --git a/doc/driver-model/of-plat.rst b/doc/driver-model/of-plat.rst index afa27c211cc..39e6295aa09 100644 --- a/doc/driver-model/of-plat.rst +++ b/doc/driver-model/of-plat.rst @@ -21,7 +21,7 @@ SoCs require a 16KB SPL image which must include a full MMC stack. In this case the overhead of device tree access may be too great.
It is possible to create platform data manually by defining C structures -for it, and reference that data in a U_BOOT_DEVICE() declaration. This +for it, and reference that data in a U_BOOT_DRVINFO() declaration. This bypasses the use of device tree completely, effectively creating a parallel configuration mechanism. But it is an available option for SPL.
@@ -79,7 +79,7 @@ SPL/TPL and should be tested with:
A new tool called 'dtoc' converts a device tree file either into a set of struct declarations, one for each compatible node, and a set of -U_BOOT_DEVICE() declarations along with the actual platform data for each +U_BOOT_DRVINFO() declarations along with the actual platform data for each device. As an example, consider this MMC node:
.. code-block:: none @@ -155,7 +155,7 @@ and the following device declarations: .card_detect_delay = 0xc8, };
- U_BOOT_DEVICE(dwmmc_at_ff0c0000) = { + U_BOOT_DRVINFO(dwmmc_at_ff0c0000) = { .name = "rockchip_rk3288_dw_mshc", .plat = &dtv_dwmmc_at_ff0c0000, .plat_size = sizeof(dtv_dwmmc_at_ff0c0000), @@ -178,7 +178,7 @@ platform data in the driver. The of_to_plat() method should therefore do nothing in such a driver.
Note that for the platform data to be matched with a driver, the 'name' -property of the U_BOOT_DEVICE() declaration has to match a driver declared +property of the U_BOOT_DRVINFO() declaration has to match a driver declared via U_BOOT_DRIVER(). This effectively means that a U_BOOT_DRIVER() with a 'name' corresponding to the devicetree 'compatible' string (after converting it to a valid name for C) is needed, so a dedicated driver is required for @@ -189,7 +189,7 @@ used to declare an alias for a driver name, typically a 'compatible' string. This macro produces no code, but it is by dtoc tool.
The parent_idx is the index of the parent driver_info structure within its -linker list (instantiated by the U_BOOT_DEVICE() macro). This is used to support +linker list (instantiated by the U_BOOT_DRVINFO() macro). This is used to support dev_get_parent(). The dm_populate_phandle_data() is included to allow for fix-ups required by dtoc. It is not currently used. The values in 'clocks' are the index of the driver_info for the target device followed by any phandle @@ -339,7 +339,7 @@ prevents them being used inadvertently. All usage must be bracketed with The dt-plat.c file contains the device declarations and is is built in spl/dt-plat.c. It additionally contains the definition of dm_populate_phandle_data() which is responsible of filling the phandle -information by adding references to U_BOOT_DEVICE by using DM_GET_DEVICE +information by adding references to U_BOOT_DRVINFO by using DM_GET_DEVICE
The pylibfdt Python module is used to access the devicetree.
diff --git a/doc/driver-model/remoteproc-framework.rst b/doc/driver-model/remoteproc-framework.rst index edb09cc1057..566495a21c4 100644 --- a/doc/driver-model/remoteproc-framework.rst +++ b/doc/driver-model/remoteproc-framework.rst @@ -125,7 +125,7 @@ a simplified definition of a device is as follows: .driver_plat_data = &mydriver_data; };
- U_BOOT_DEVICE(proc_3_demo) = { + U_BOOT_DRVINFO(proc_3_demo) = { .name = "sandbox_test_proc", .plat = &proc_3_test, }; diff --git a/doc/driver-model/spi-howto.rst b/doc/driver-model/spi-howto.rst index f1c41671390..97fbf750cb6 100644 --- a/doc/driver-model/spi-howto.rst +++ b/doc/driver-model/spi-howto.rst @@ -270,7 +270,7 @@ fills in the fields from device tree. Add the platform data [non-device-tree only] --------------------------------------------
-Specify this data in a U_BOOT_DEVICE() declaration in your board file: +Specify this data in a U_BOOT_DRVINFO() declaration in your board file:
.. code-block:: c
@@ -281,7 +281,7 @@ Specify this data in a U_BOOT_DEVICE() declaration in your board file: .deactivate_delay_us = ... };
- U_BOOT_DEVICE(board_spi0) = { + U_BOOT_DRVINFO(board_spi0) = { .name = "exynos_spi", .plat = &platdata_spi0, }; diff --git a/drivers/crypto/fsl/fsl_rsa.c b/drivers/crypto/fsl/fsl_rsa.c index ed2a54f6ec2..897ee855ead 100644 --- a/drivers/crypto/fsl/fsl_rsa.c +++ b/drivers/crypto/fsl/fsl_rsa.c @@ -55,6 +55,6 @@ U_BOOT_DRIVER(fsl_rsa_mod_exp) = { .ops = &fsl_mod_exp_ops, };
-U_BOOT_DEVICE(fsl_rsa) = { +U_BOOT_DRVINFO(fsl_rsa) = { .name = "fsl_rsa_mod_exp", }; diff --git a/drivers/crypto/rsa_mod_exp/mod_exp_sw.c b/drivers/crypto/rsa_mod_exp/mod_exp_sw.c index 4ce85b32244..7bed444c3fb 100644 --- a/drivers/crypto/rsa_mod_exp/mod_exp_sw.c +++ b/drivers/crypto/rsa_mod_exp/mod_exp_sw.c @@ -35,6 +35,6 @@ U_BOOT_DRIVER(mod_exp_sw) = { .flags = DM_FLAG_PRE_RELOC, };
-U_BOOT_DEVICE(mod_exp_sw) = { +U_BOOT_DRVINFO(mod_exp_sw) = { .name = "mod_exp_sw", }; diff --git a/drivers/demo/demo-pdata.c b/drivers/demo/demo-pdata.c index b504c31373c..818f77503a3 100644 --- a/drivers/demo/demo-pdata.c +++ b/drivers/demo/demo-pdata.c @@ -20,27 +20,27 @@ static const struct dm_demo_pdata yellow_hexagon = { .sides = 6. };
-U_BOOT_DEVICE(demo0) = { +U_BOOT_DRVINFO(demo0) = { .name = "demo_shape_drv", .plat = &red_square, };
-U_BOOT_DEVICE(demo1) = { +U_BOOT_DRVINFO(demo1) = { .name = "demo_simple_drv", .plat = &red_square, };
-U_BOOT_DEVICE(demo2) = { +U_BOOT_DRVINFO(demo2) = { .name = "demo_shape_drv", .plat = &green_triangle, };
-U_BOOT_DEVICE(demo3) = { +U_BOOT_DRVINFO(demo3) = { .name = "demo_simple_drv", .plat = &yellow_hexagon, };
-U_BOOT_DEVICE(demo4) = { +U_BOOT_DRVINFO(demo4) = { .name = "demo_shape_drv", .plat = &yellow_hexagon, }; diff --git a/drivers/gpio/imx_rgpio2p.c b/drivers/gpio/imx_rgpio2p.c index a5a290a00ce..0e2874ca95c 100644 --- a/drivers/gpio/imx_rgpio2p.c +++ b/drivers/gpio/imx_rgpio2p.c @@ -158,7 +158,7 @@ static int imx_rgpio2p_bind(struct udevice *dev) /* * If plat already exsits, directly return. * Actually only when DT is not supported, plat - * is statically initialized in U_BOOT_DEVICES.Here + * is statically initialized in U_BOOT_DRVINFOS.Here * will return. */ if (plat) @@ -216,7 +216,7 @@ static const struct imx_rgpio2p_plat imx_plat[] = { { 5, (struct gpio_regs *)RGPIO2P_GPIO6_BASE_ADDR }, };
-U_BOOT_DEVICES(imx_rgpio2ps) = { +U_BOOT_DRVINFOS(imx_rgpio2ps) = { { "imx_rgpio2p", &imx_plat[0] }, { "imx_rgpio2p", &imx_plat[1] }, { "imx_rgpio2p", &imx_plat[2] }, diff --git a/drivers/gpio/mxc_gpio.c b/drivers/gpio/mxc_gpio.c index 9fc217ae6ae..6280fb59840 100644 --- a/drivers/gpio/mxc_gpio.c +++ b/drivers/gpio/mxc_gpio.c @@ -372,7 +372,7 @@ static const struct mxc_gpio_plat mxc_plat[] = { #endif };
-U_BOOT_DEVICES(mxc_gpios) = { +U_BOOT_DRVINFOS(mxc_gpios) = { { "gpio_mxc", &mxc_plat[0] }, { "gpio_mxc", &mxc_plat[1] }, { "gpio_mxc", &mxc_plat[2] }, diff --git a/drivers/remoteproc/sandbox_testproc.c b/drivers/remoteproc/sandbox_testproc.c index ee2ee730712..6836eca4c55 100644 --- a/drivers/remoteproc/sandbox_testproc.c +++ b/drivers/remoteproc/sandbox_testproc.c @@ -352,7 +352,7 @@ static struct dm_rproc_uclass_pdata proc_3_test = { .mem_type = RPROC_INTERNAL_MEMORY_MAPPED, };
-U_BOOT_DEVICE(proc_3_demo) = { +U_BOOT_DRVINFO(proc_3_demo) = { .name = "sandbox_test_proc", .plat = &proc_3_test, }; diff --git a/drivers/rtc/emul_rtc.c b/drivers/rtc/emul_rtc.c index 1dc80ca1274..8f0e1ab5ac6 100644 --- a/drivers/rtc/emul_rtc.c +++ b/drivers/rtc/emul_rtc.c @@ -91,6 +91,6 @@ U_BOOT_DRIVER(rtc_emul) = { .priv_auto = sizeof(struct emul_rtc), };
-U_BOOT_DEVICE(rtc_emul) = { +U_BOOT_DRVINFO(rtc_emul) = { .name = "rtc_emul", }; diff --git a/drivers/serial/sandbox.c b/drivers/serial/sandbox.c index 19368ba2560..756738c2d21 100644 --- a/drivers/serial/sandbox.c +++ b/drivers/serial/sandbox.c @@ -241,7 +241,7 @@ static const struct sandbox_serial_plat platdata_non_fdt = { .colour = -1, };
-U_BOOT_DEVICE(serial_sandbox_non_fdt) = { +U_BOOT_DRVINFO(serial_sandbox_non_fdt) = { .name = "sandbox_serial", .plat = &platdata_non_fdt, }; diff --git a/drivers/sysreset/sysreset_sandbox.c b/drivers/sysreset/sysreset_sandbox.c index 8eca7d8bfda..08685823e99 100644 --- a/drivers/sysreset/sysreset_sandbox.c +++ b/drivers/sysreset/sysreset_sandbox.c @@ -47,7 +47,7 @@ static int sandbox_sysreset_request(struct udevice *dev, enum sysreset_t type)
/* * If we have a device tree, the device we created from platform data - * (see the U_BOOT_DEVICE() declaration below) should not do anything. + * (see the U_BOOT_DRVINFO() declaration below) should not do anything. * If we are that device, return an error. */ if (state->fdt_fname && !dev_has_ofnode(dev)) @@ -135,7 +135,7 @@ U_BOOT_DRIVER(warm_sysreset_sandbox) = {
#if !CONFIG_IS_ENABLED(OF_PLATDATA) /* This is here in case we don't have a device tree */ -U_BOOT_DEVICE(sysreset_sandbox_non_fdt) = { +U_BOOT_DRVINFO(sysreset_sandbox_non_fdt) = { .name = "sysreset_sandbox", }; #endif diff --git a/drivers/timer/sandbox_timer.c b/drivers/timer/sandbox_timer.c index 135c0f38a4d..2075cd4edda 100644 --- a/drivers/timer/sandbox_timer.c +++ b/drivers/timer/sandbox_timer.c @@ -65,6 +65,6 @@ U_BOOT_DRIVER(sandbox_timer) = { };
/* This is here in case we don't have a device tree */ -U_BOOT_DEVICE(sandbox_timer_non_fdt) = { +U_BOOT_DRVINFO(sandbox_timer_non_fdt) = { .name = "sandbox_timer", }; diff --git a/drivers/video/sunxi/sunxi_de2.c b/drivers/video/sunxi/sunxi_de2.c index 50657a77d36..a3e21aa5f13 100644 --- a/drivers/video/sunxi/sunxi_de2.c +++ b/drivers/video/sunxi/sunxi_de2.c @@ -319,7 +319,7 @@ U_BOOT_DRIVER(sunxi_de2) = { .flags = DM_FLAG_PRE_RELOC, };
-U_BOOT_DEVICE(sunxi_de2) = { +U_BOOT_DRVINFO(sunxi_de2) = { .name = "sunxi_de2" };
diff --git a/drivers/video/sunxi/sunxi_dw_hdmi.c b/drivers/video/sunxi/sunxi_dw_hdmi.c index 3e8d71538f2..0b8cefc311e 100644 --- a/drivers/video/sunxi/sunxi_dw_hdmi.c +++ b/drivers/video/sunxi/sunxi_dw_hdmi.c @@ -398,6 +398,6 @@ U_BOOT_DRIVER(sunxi_dw_hdmi) = { .priv_auto = sizeof(struct sunxi_dw_hdmi_priv), };
-U_BOOT_DEVICE(sunxi_dw_hdmi) = { +U_BOOT_DRVINFO(sunxi_dw_hdmi) = { .name = "sunxi_dw_hdmi" }; diff --git a/drivers/video/sunxi/sunxi_lcd.c b/drivers/video/sunxi/sunxi_lcd.c index dd2bb1f5fc5..635edf6dd3b 100644 --- a/drivers/video/sunxi/sunxi_lcd.c +++ b/drivers/video/sunxi/sunxi_lcd.c @@ -146,7 +146,7 @@ U_BOOT_DRIVER(sunxi_lcd) = { };
#ifdef CONFIG_MACH_SUN50I -U_BOOT_DEVICE(sunxi_lcd) = { +U_BOOT_DRVINFO(sunxi_lcd) = { .name = "sunxi_lcd" }; #endif diff --git a/dts/Kconfig b/dts/Kconfig index aeda542f985..71f50552e4f 100644 --- a/dts/Kconfig +++ b/dts/Kconfig @@ -346,13 +346,13 @@ config SPL_OF_PLATDATA former can add 3KB or more to a Thumb 2 Image.
This option enables generation of platform data from the device - tree as C code. This code creates devices using U_BOOT_DEVICE() + tree as C code. This code creates devices using U_BOOT_DRVINFO() declarations. The benefit is that it allows driver code to access the platform data directly in C structures, avoidin the libfdt overhead.
This option works by generating C structure declarations for each - compatible string, then adding platform data and U_BOOT_DEVICE + compatible string, then adding platform data and U_BOOT_DRVINFO declarations for each node. See of-plat.txt for more information.
config SPL_OF_PLATDATA_PARENT @@ -376,13 +376,13 @@ config TPL_OF_PLATDATA former can add 3KB or more to a Thumb 2 Image.
This option enables generation of platform data from the device - tree as C code. This code creates devices using U_BOOT_DEVICE() + tree as C code. This code creates devices using U_BOOT_DRVINFO() declarations. The benefit is that it allows driver code to access the platform data directly in C structures, avoidin the libfdt overhead.
This option works by generating C structure declarations for each - compatible string, then adding platform data and U_BOOT_DEVICE + compatible string, then adding platform data and U_BOOT_DRVINFO declarations for each node. See of-plat.txt for more information.
config TPL_OF_PLATDATA_PARENT diff --git a/include/dm/device.h b/include/dm/device.h index 4469804a00e..e16ba2405f9 100644 --- a/include/dm/device.h +++ b/include/dm/device.h @@ -104,7 +104,7 @@ enum { * particular port or peripheral (essentially a driver instance). * * A device will come into existence through a 'bind' call, either due to - * a U_BOOT_DEVICE() macro (in which case plat is non-NULL) or a node + * a U_BOOT_DRVINFO() macro (in which case plat is non-NULL) or a node * in the device tree (in which case of_offset is >= 0). In the latter case * we translate the device tree information into plat in a function * implemented by the driver of_to_plat method (called just before the @@ -293,7 +293,7 @@ struct udevice_id { * platform data to be allocated in the device's ->plat pointer. * This is typically only useful for device-tree-aware drivers (those with * an of_match), since drivers which use plat will have the data - * provided in the U_BOOT_DEVICE() instantiation. + * provided in the U_BOOT_DRVINFO() instantiation. * @per_child_auto: Each device can hold private data owned by * its parent. If required this will be automatically allocated if this * value is non-zero. diff --git a/include/dm/lists.h b/include/dm/lists.h index 070bc9c19f6..1a865525461 100644 --- a/include/dm/lists.h +++ b/include/dm/lists.h @@ -35,7 +35,7 @@ struct uclass_driver *lists_uclass_lookup(enum uclass_id id); /** * lists_bind_drivers() - search for and bind all drivers to parent * - * This searches the U_BOOT_DEVICE() structures and creates new devices for + * This searches the U_BOOT_DRVINFO() structures and creates new devices for * each one. The devices will have @parent as their parent. * * @parent: parent device (root) diff --git a/include/dm/platdata.h b/include/dm/platdata.h index d650fb39190..e2b16ce6e4e 100644 --- a/include/dm/platdata.h +++ b/include/dm/platdata.h @@ -56,31 +56,31 @@ struct driver_rt { * is not feasible (e.g. serial driver in SPL where <8KB of SRAM is * available). U-Boot's driver model uses device tree for configuration. * - * When of-platdata is in use, U_BOOT_DEVICE() cannot be used outside of the + * When of-platdata is in use, U_BOOT_DRVINFO() cannot be used outside of the * dt-plat.c file created by dtoc */ #if CONFIG_IS_ENABLED(OF_PLATDATA) && !defined(DT_PLATDATA_C) -#define U_BOOT_DEVICE(__name) _Static_assert(false, \ - "Cannot use U_BOOT_DEVICE with of-platdata. Please use devicetree instead") +#define U_BOOT_DRVINFO(__name) _Static_assert(false, \ + "Cannot use U_BOOT_DRVINFO with of-platdata. Please use devicetree instead") #else -#define U_BOOT_DEVICE(__name) \ +#define U_BOOT_DRVINFO(__name) \ ll_entry_declare(struct driver_info, __name, driver_info) #endif
/* Declare a list of devices. The argument is a driver_info[] array */ -#define U_BOOT_DEVICES(__name) \ +#define U_BOOT_DRVINFOS(__name) \ ll_entry_declare_list(struct driver_info, __name, driver_info)
/** * Get a pointer to a given device info given its name * - * With the declaration U_BOOT_DEVICE(name), DM_GET_DEVICE(name) will return a + * With the declaration U_BOOT_DRVINFO(name), DM_GET_DEVICE(name) will return a * pointer to the struct driver_info created by that declaration. * * if OF_PLATDATA is enabled, from this it is possible to use the @dev member of * struct driver_info to find the device pointer itself. * - * TODO(sjg@chromium.org): U_BOOT_DEVICE() tells U-Boot to create a device, so + * TODO(sjg@chromium.org): U_BOOT_DRVINFO() tells U-Boot to create a device, so * the naming seems sensible, but DM_GET_DEVICE() is a bit of misnomer, since it * finds the driver_info record, not the device. * @@ -93,7 +93,7 @@ struct driver_rt { /** * dm_populate_phandle_data() - Populates phandle data in platda * - * This populates phandle data with an U_BOOT_DEVICE entry get by + * This populates phandle data with an U_BOOT_DRVINFO entry get by * DM_GET_DEVICE. The implementation of this function will be done * by dtoc when parsing dtb. */ diff --git a/include/dm/platform_data/spi_pl022.h b/include/dm/platform_data/spi_pl022.h index c5aa3212915..7f74b3cbc5c 100644 --- a/include/dm/platform_data/spi_pl022.h +++ b/include/dm/platform_data/spi_pl022.h @@ -3,7 +3,7 @@ * (C) Copyright 2018 * Quentin Schulz, Bootlin, quentin.schulz@bootlin.com * - * Structure for use with U_BOOT_DEVICE for pl022 SPI devices or to use + * Structure for use with U_BOOT_DRVINFO for pl022 SPI devices or to use * in of_to_plat. */
diff --git a/test/dm/core.c b/test/dm/core.c index 580d171e30e..82b7a668ddc 100644 --- a/test/dm/core.c +++ b/test/dm/core.c @@ -43,17 +43,17 @@ static const struct dm_test_pdata test_pdata_pre_reloc = { .ping_add = TEST_INTVAL_PRE_RELOC, };
-U_BOOT_DEVICE(dm_test_info1) = { +U_BOOT_DRVINFO(dm_test_info1) = { .name = "test_drv", .plat = &test_pdata[0], };
-U_BOOT_DEVICE(dm_test_info2) = { +U_BOOT_DRVINFO(dm_test_info2) = { .name = "test_drv", .plat = &test_pdata[1], };
-U_BOOT_DEVICE(dm_test_info3) = { +U_BOOT_DRVINFO(dm_test_info3) = { .name = "test_drv", .plat = &test_pdata[2], }; diff --git a/tools/dtoc/dtb_platdata.py b/tools/dtoc/dtb_platdata.py index 7bd19891139..ebe5132e143 100644 --- a/tools/dtoc/dtb_platdata.py +++ b/tools/dtoc/dtb_platdata.py @@ -713,14 +713,14 @@ class DtbPlatdata(): def _declare_device(self, var_name, struct_name, node_parent): """Add a device declaration to the output
- This declares a U_BOOT_DEVICE() for the device being processed + This declares a U_BOOT_DRVINFO() for the device being processed
Args: var_name (str): C name for the node struct_name (str): Name for the dt struct associated with the node node_parent (Node): Parent of the node (or None if none) """ - self.buf('U_BOOT_DEVICE(%s) = {\n' % var_name) + self.buf('U_BOOT_DRVINFO(%s) = {\n' % var_name) self.buf('\t.name\t\t= "%s",\n' % struct_name) self.buf('\t.plat\t= &%s%s,\n' % (VAL_PREFIX, var_name)) self.buf('\t.plat_size\t= sizeof(%s%s),\n' % (VAL_PREFIX, var_name)) @@ -783,14 +783,14 @@ class DtbPlatdata(): """Generate device defintions for the platform data
This writes out C platform data initialisation data and - U_BOOT_DEVICE() declarations for each valid node. Where a node has + U_BOOT_DRVINFO() declarations for each valid node. Where a node has multiple compatible strings, a #define is used to make them equivalent.
See the documentation in doc/driver-model/of-plat.rst for more information. """ self.out_header() - self.out('/* Allow use of U_BOOT_DEVICE() in this file */\n') + self.out('/* Allow use of U_BOOT_DRVINFO() in this file */\n') self.out('#define DT_PLATDATA_C\n') self.out('\n') self.out('#include <common.h>\n') diff --git a/tools/dtoc/test_dtoc.py b/tools/dtoc/test_dtoc.py index fb65f284ceb..dbd4e3bf1d4 100755 --- a/tools/dtoc/test_dtoc.py +++ b/tools/dtoc/test_dtoc.py @@ -44,7 +44,7 @@ C_HEADER = '''/* * This file was generated by dtoc from a .dtb (device tree binary) file. */
-/* Allow use of U_BOOT_DEVICE() in this file */ +/* Allow use of U_BOOT_DRVINFO() in this file */ #define DT_PLATDATA_C
#include <common.h> @@ -214,7 +214,7 @@ struct dtd_sandbox_spl_test { /* Node /i2c@0 index 0 */ static struct dtd_sandbox_i2c_test dtv_i2c_at_0 = { }; -U_BOOT_DEVICE(i2c_at_0) = { +U_BOOT_DRVINFO(i2c_at_0) = { \t.name\t\t= "sandbox_i2c_test", \t.plat\t= &dtv_i2c_at_0, \t.plat_size\t= sizeof(dtv_i2c_at_0), @@ -226,7 +226,7 @@ static struct dtd_sandbox_pmic_test dtv_pmic_at_9 = { \t.low_power\t\t= true, \t.reg\t\t\t= {0x9, 0x0}, }; -U_BOOT_DEVICE(pmic_at_9) = { +U_BOOT_DRVINFO(pmic_at_9) = { \t.name\t\t= "sandbox_pmic_test", \t.plat\t= &dtv_pmic_at_9, \t.plat_size\t= sizeof(dtv_pmic_at_9), @@ -246,7 +246,7 @@ static struct dtd_sandbox_spl_test dtv_spl_test = { \t.stringarray\t\t= {"multi-word", "message", ""}, \t.stringval\t\t= "message", }; -U_BOOT_DEVICE(spl_test) = { +U_BOOT_DRVINFO(spl_test) = { \t.name\t\t= "sandbox_spl_test", \t.plat\t= &dtv_spl_test, \t.plat_size\t= sizeof(dtv_spl_test), @@ -265,7 +265,7 @@ static struct dtd_sandbox_spl_test dtv_spl_test2 = { \t.stringarray\t\t= {"another", "multi-word", "message"}, \t.stringval\t\t= "message2", }; -U_BOOT_DEVICE(spl_test2) = { +U_BOOT_DRVINFO(spl_test2) = { \t.name\t\t= "sandbox_spl_test", \t.plat\t= &dtv_spl_test2, \t.plat_size\t= sizeof(dtv_spl_test2), @@ -278,7 +278,7 @@ static struct dtd_sandbox_spl_test dtv_spl_test3 = { \t\t0x0}, \t.stringarray\t\t= {"one", "", ""}, }; -U_BOOT_DEVICE(spl_test3) = { +U_BOOT_DRVINFO(spl_test3) = { \t.name\t\t= "sandbox_spl_test", \t.plat\t= &dtv_spl_test3, \t.plat_size\t= sizeof(dtv_spl_test3), @@ -333,7 +333,7 @@ static struct dtd_sandbox_gpio dtv_gpios_at_0 = { \t.gpio_controller\t= true, \t.sandbox_gpio_count\t= 0x14, }; -U_BOOT_DEVICE(gpios_at_0) = { +U_BOOT_DRVINFO(gpios_at_0) = { \t.name\t\t= "sandbox_gpio", \t.plat\t= &dtv_gpios_at_0, \t.plat_size\t= sizeof(dtv_gpios_at_0), @@ -365,7 +365,7 @@ struct dtd_invalid { /* Node /spl-test index 0 */ static struct dtd_invalid dtv_spl_test = { }; -U_BOOT_DEVICE(spl_test) = { +U_BOOT_DRVINFO(spl_test) = { \t.name\t\t= "invalid", \t.plat\t= &dtv_spl_test, \t.plat_size\t= sizeof(dtv_spl_test), @@ -400,7 +400,7 @@ struct dtd_target { static struct dtd_target dtv_phandle2_target = { \t.intval\t\t\t= 0x1, }; -U_BOOT_DEVICE(phandle2_target) = { +U_BOOT_DRVINFO(phandle2_target) = { \t.name\t\t= "target", \t.plat\t= &dtv_phandle2_target, \t.plat_size\t= sizeof(dtv_phandle2_target), @@ -411,7 +411,7 @@ U_BOOT_DEVICE(phandle2_target) = { static struct dtd_target dtv_phandle3_target = { \t.intval\t\t\t= 0x2, }; -U_BOOT_DEVICE(phandle3_target) = { +U_BOOT_DRVINFO(phandle3_target) = { \t.name\t\t= "target", \t.plat\t= &dtv_phandle3_target, \t.plat_size\t= sizeof(dtv_phandle3_target), @@ -422,7 +422,7 @@ U_BOOT_DEVICE(phandle3_target) = { static struct dtd_target dtv_phandle_target = { \t.intval\t\t\t= 0x0, }; -U_BOOT_DEVICE(phandle_target) = { +U_BOOT_DRVINFO(phandle_target) = { \t.name\t\t= "target", \t.plat\t= &dtv_phandle_target, \t.plat_size\t= sizeof(dtv_phandle_target), @@ -437,7 +437,7 @@ static struct dtd_source dtv_phandle_source = { \t\t\t{1, {12, 13}}, \t\t\t{4, {}},}, }; -U_BOOT_DEVICE(phandle_source) = { +U_BOOT_DRVINFO(phandle_source) = { \t.name\t\t= "source", \t.plat\t= &dtv_phandle_source, \t.plat_size\t= sizeof(dtv_phandle_source), @@ -449,7 +449,7 @@ static struct dtd_source dtv_phandle_source2 = { \t.clocks\t\t\t= { \t\t\t{4, {}},}, }; -U_BOOT_DEVICE(phandle_source2) = { +U_BOOT_DRVINFO(phandle_source2) = { \t.name\t\t= "source", \t.plat\t= &dtv_phandle_source2, \t.plat_size\t= sizeof(dtv_phandle_source2), @@ -487,7 +487,7 @@ struct dtd_target { /* Node /phandle-target index 1 */ static struct dtd_target dtv_phandle_target = { }; -U_BOOT_DEVICE(phandle_target) = { +U_BOOT_DRVINFO(phandle_target) = { \t.name\t\t= "target", \t.plat\t= &dtv_phandle_target, \t.plat_size\t= sizeof(dtv_phandle_target), @@ -499,7 +499,7 @@ static struct dtd_source dtv_phandle_source2 = { \t.clocks\t\t\t= { \t\t\t{1, {}},}, }; -U_BOOT_DEVICE(phandle_source2) = { +U_BOOT_DRVINFO(phandle_source2) = { \t.name\t\t= "source", \t.plat\t= &dtv_phandle_source2, \t.plat_size\t= sizeof(dtv_phandle_source2), @@ -522,7 +522,7 @@ void dm_populate_phandle_data(void) { static struct dtd_target dtv_phandle2_target = { \t.intval\t\t\t= 0x1, }; -U_BOOT_DEVICE(phandle2_target) = { +U_BOOT_DRVINFO(phandle2_target) = { \t.name\t\t= "target", \t.plat\t= &dtv_phandle2_target, \t.plat_size\t= sizeof(dtv_phandle2_target), @@ -533,7 +533,7 @@ U_BOOT_DEVICE(phandle2_target) = { static struct dtd_target dtv_phandle3_target = { \t.intval\t\t\t= 0x2, }; -U_BOOT_DEVICE(phandle3_target) = { +U_BOOT_DRVINFO(phandle3_target) = { \t.name\t\t= "target", \t.plat\t= &dtv_phandle3_target, \t.plat_size\t= sizeof(dtv_phandle3_target), @@ -544,7 +544,7 @@ U_BOOT_DEVICE(phandle3_target) = { static struct dtd_target dtv_phandle_target = { \t.intval\t\t\t= 0x0, }; -U_BOOT_DEVICE(phandle_target) = { +U_BOOT_DRVINFO(phandle_target) = { \t.name\t\t= "target", \t.plat\t= &dtv_phandle_target, \t.plat_size\t= sizeof(dtv_phandle_target), @@ -559,7 +559,7 @@ static struct dtd_source dtv_phandle_source = { \t\t\t{1, {12, 13}}, \t\t\t{4, {}},}, }; -U_BOOT_DEVICE(phandle_source) = { +U_BOOT_DRVINFO(phandle_source) = { \t.name\t\t= "source", \t.plat\t= &dtv_phandle_source, \t.plat_size\t= sizeof(dtv_phandle_source), @@ -571,7 +571,7 @@ static struct dtd_source dtv_phandle_source2 = { \t.cd_gpios\t\t= { \t\t\t{4, {}},}, }; -U_BOOT_DEVICE(phandle_source2) = { +U_BOOT_DRVINFO(phandle_source2) = { \t.name\t\t= "source", \t.plat\t= &dtv_phandle_source2, \t.plat_size\t= sizeof(dtv_phandle_source2), @@ -629,7 +629,7 @@ struct dtd_test3 { static struct dtd_test1 dtv_test1 = { \t.reg\t\t\t= {0x1234, 0x5678}, }; -U_BOOT_DEVICE(test1) = { +U_BOOT_DRVINFO(test1) = { \t.name\t\t= "test1", \t.plat\t= &dtv_test1, \t.plat_size\t= sizeof(dtv_test1), @@ -640,7 +640,7 @@ U_BOOT_DEVICE(test1) = { static struct dtd_test2 dtv_test2 = { \t.reg\t\t\t= {0x1234567890123456, 0x9876543210987654}, }; -U_BOOT_DEVICE(test2) = { +U_BOOT_DRVINFO(test2) = { \t.name\t\t= "test2", \t.plat\t= &dtv_test2, \t.plat_size\t= sizeof(dtv_test2), @@ -651,7 +651,7 @@ U_BOOT_DEVICE(test2) = { static struct dtd_test3 dtv_test3 = { \t.reg\t\t\t= {0x1234567890123456, 0x9876543210987654, 0x2, 0x3}, }; -U_BOOT_DEVICE(test3) = { +U_BOOT_DRVINFO(test3) = { \t.name\t\t= "test3", \t.plat\t= &dtv_test3, \t.plat_size\t= sizeof(dtv_test3), @@ -684,7 +684,7 @@ struct dtd_test2 { static struct dtd_test1 dtv_test1 = { \t.reg\t\t\t= {0x1234, 0x5678}, }; -U_BOOT_DEVICE(test1) = { +U_BOOT_DRVINFO(test1) = { \t.name\t\t= "test1", \t.plat\t= &dtv_test1, \t.plat_size\t= sizeof(dtv_test1), @@ -695,7 +695,7 @@ U_BOOT_DEVICE(test1) = { static struct dtd_test2 dtv_test2 = { \t.reg\t\t\t= {0x12345678, 0x98765432, 0x2, 0x3}, }; -U_BOOT_DEVICE(test2) = { +U_BOOT_DRVINFO(test2) = { \t.name\t\t= "test2", \t.plat\t= &dtv_test2, \t.plat_size\t= sizeof(dtv_test2), @@ -731,7 +731,7 @@ struct dtd_test3 { static struct dtd_test1 dtv_test1 = { \t.reg\t\t\t= {0x123400000000, 0x5678}, }; -U_BOOT_DEVICE(test1) = { +U_BOOT_DRVINFO(test1) = { \t.name\t\t= "test1", \t.plat\t= &dtv_test1, \t.plat_size\t= sizeof(dtv_test1), @@ -742,7 +742,7 @@ U_BOOT_DEVICE(test1) = { static struct dtd_test2 dtv_test2 = { \t.reg\t\t\t= {0x1234567890123456, 0x98765432}, }; -U_BOOT_DEVICE(test2) = { +U_BOOT_DRVINFO(test2) = { \t.name\t\t= "test2", \t.plat\t= &dtv_test2, \t.plat_size\t= sizeof(dtv_test2), @@ -753,7 +753,7 @@ U_BOOT_DEVICE(test2) = { static struct dtd_test3 dtv_test3 = { \t.reg\t\t\t= {0x1234567890123456, 0x98765432, 0x2, 0x3}, }; -U_BOOT_DEVICE(test3) = { +U_BOOT_DRVINFO(test3) = { \t.name\t\t= "test3", \t.plat\t= &dtv_test3, \t.plat_size\t= sizeof(dtv_test3), @@ -789,7 +789,7 @@ struct dtd_test3 { static struct dtd_test1 dtv_test1 = { \t.reg\t\t\t= {0x1234, 0x567800000000}, }; -U_BOOT_DEVICE(test1) = { +U_BOOT_DRVINFO(test1) = { \t.name\t\t= "test1", \t.plat\t= &dtv_test1, \t.plat_size\t= sizeof(dtv_test1), @@ -800,7 +800,7 @@ U_BOOT_DEVICE(test1) = { static struct dtd_test2 dtv_test2 = { \t.reg\t\t\t= {0x12345678, 0x9876543210987654}, }; -U_BOOT_DEVICE(test2) = { +U_BOOT_DRVINFO(test2) = { \t.name\t\t= "test2", \t.plat\t= &dtv_test2, \t.plat_size\t= sizeof(dtv_test2), @@ -811,7 +811,7 @@ U_BOOT_DEVICE(test2) = { static struct dtd_test3 dtv_test3 = { \t.reg\t\t\t= {0x12345678, 0x9876543210987654, 0x2, 0x3}, }; -U_BOOT_DEVICE(test3) = { +U_BOOT_DRVINFO(test3) = { \t.name\t\t= "test3", \t.plat\t= &dtv_test3, \t.plat_size\t= sizeof(dtv_test3), @@ -863,7 +863,7 @@ struct dtd_sandbox_spl_test { static struct dtd_sandbox_spl_test dtv_spl_test = { \t.intval\t\t\t= 0x1, }; -U_BOOT_DEVICE(spl_test) = { +U_BOOT_DRVINFO(spl_test) = { \t.name\t\t= "sandbox_spl_test", \t.plat\t= &dtv_spl_test, \t.plat_size\t= sizeof(dtv_spl_test), @@ -874,7 +874,7 @@ U_BOOT_DEVICE(spl_test) = { static struct dtd_sandbox_spl_test dtv_spl_test2 = { \t.intarray\t\t= 0x5, }; -U_BOOT_DEVICE(spl_test2) = { +U_BOOT_DRVINFO(spl_test2) = { \t.name\t\t= "sandbox_spl_test", \t.plat\t= &dtv_spl_test2, \t.plat_size\t= sizeof(dtv_spl_test2),