Re: [U-Boot-Users] Start with u-boot on at91rm9200 on AT91RM9200-EK

In message F6726C3E89A64840A5E10310E342A38F01BE93C6@xchback01.back.harting.intra you wrote:

because of a new Flash Chip i must compile u-boot and in than implement the changes for the Atmel AT49BV6416T, which has different Architecture than the AT49BV6416. I can build several Versions of u-boot ( 1.1.1, 1.1.4,... ) but all give the same Problem. I start with "make at91rm9200dk_config" and then "make all" and it gives me a u-boot.bin. When i load it with loader.bin it starts and nothing ist done or printed. If i compare with the Atmel

You don't have to be surprised if you chose a configuration for a different system and it doesn't work. You have port U-Boot to your hardware.

Best regards,

Wolfgang Denk