board_init_f_mem() alters the C runtime environment's stack it is actually already using. This is not a valid behaviour within a C runtime environment.
Split board_init_f_mem into C functions which do not alter their own stack and always behave properly with respect to their C runtime environment.
Signed-off-by: Albert ARIBAUD albert.u.boot@aribaud.net --- Copying custodians for all architectures which this patch affects.
This patch has been build-tested for all affected architectures except NIOS2, and run-tested on ARM OpenRD Client.
For NIOS2, this patch contains all manual v1 and v2 fixes by Thomas.
For x86, this patch contains all manual v2 fixes by Bin.
Changes in v7: None Changes in v6: - Switch from size- to address-based reservation - Add comments on gdp_tr vs gd use wrt arch_setup_gd. - Clarify that this is about the *early* malloc arena
Changes in v5: - Reword commit message (including summary/subject) - Reword comments in ARC code
Changes in v4: - Add comments on reserving GD at the lowest location - Add comments on post-incrementing base for each "chunk"
Changes in v3: - Rebase after commit 9ac4fc82 - Simplify malloc conditional as per commit 9ac4fc82 - Fix NIOS2 return value register (r2, not r4) - Fix x86 subl argument inversion - Group allocations in a single function - Group initializations in a single function
Changes in v2: - Fix all checkpatch issues - Fix board_init_f_malloc prototype mismatch - Fix board_init_[f_]xxx typo in NIOS2 - Fix aarch64 asm 'sub' syntax error
arch/arc/lib/start.S | 12 +++-- arch/arm/lib/crt0.S | 3 +- arch/arm/lib/crt0_64.S | 4 +- arch/microblaze/cpu/start.S | 4 +- arch/nios2/cpu/start.S | 14 ++++-- arch/powerpc/cpu/ppc4xx/start.S | 6 ++- arch/x86/cpu/start.S | 3 +- arch/x86/lib/fsp/fsp_common.c | 4 +- common/init/board_init.c | 109 ++++++++++++++++++++++++++++++++++++---- include/common.h | 34 ++++++------- 10 files changed, 144 insertions(+), 49 deletions(-)
diff --git a/arch/arc/lib/start.S b/arch/arc/lib/start.S index 26a5934..90ee7e0 100644 --- a/arch/arc/lib/start.S +++ b/arch/arc/lib/start.S @@ -50,18 +50,20 @@ ENTRY(_start) 1: #endif
- /* Setup stack- and frame-pointers */ + /* Establish C runtime stack and frame */ mov %sp, CONFIG_SYS_INIT_SP_ADDR mov %fp, %sp
- /* Allocate and zero GD, update SP */ + /* Allocate reserved area from current top of stack */ mov %r0, %sp - bl board_init_f_mem - - /* Update stack- and frame-pointers */ + bl board_init_f_alloc_reserve + /* Set stack below reserved area, adjust frame pointer accordingly */ mov %sp, %r0 mov %fp, %sp
+ /* Initialize reserved area - note: r0 already contains address */ + bl board_init_f_init_reserve + /* Zero the one and only argument of "board_init_f" */ mov_s %r0, 0 j board_init_f diff --git a/arch/arm/lib/crt0.S b/arch/arm/lib/crt0.S index 80548eb..4f2a712 100644 --- a/arch/arm/lib/crt0.S +++ b/arch/arm/lib/crt0.S @@ -83,8 +83,9 @@ ENTRY(_main) bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ #endif mov r0, sp - bl board_init_f_mem + bl board_init_f_alloc_reserve mov sp, r0 + bl board_init_f_init_reserve
mov r0, #0 bl board_init_f diff --git a/arch/arm/lib/crt0_64.S b/arch/arm/lib/crt0_64.S index cef1c71..b4fc760 100644 --- a/arch/arm/lib/crt0_64.S +++ b/arch/arm/lib/crt0_64.S @@ -75,8 +75,10 @@ ENTRY(_main) ldr x0, =(CONFIG_SYS_INIT_SP_ADDR) #endif bic sp, x0, #0xf /* 16-byte alignment for ABI compliance */ - bl board_init_f_mem + mov x0, sp + bl board_init_f_alloc_reserve mov sp, x0 + bl board_init_f_init_reserve
mov x0, #0 bl board_init_f diff --git a/arch/microblaze/cpu/start.S b/arch/microblaze/cpu/start.S index 14f46a8..206be3e 100644 --- a/arch/microblaze/cpu/start.S +++ b/arch/microblaze/cpu/start.S @@ -25,7 +25,7 @@ _start:
addi r8, r0, __end mts rslr, r8 - /* TODO: Redo this code to call board_init_f_mem() */ + /* TODO: Redo this code to call board_init_f_*() */ #if defined(CONFIG_SPL_BUILD) addi r1, r0, CONFIG_SPL_STACK_ADDR mts rshr, r1 @@ -142,7 +142,7 @@ _start: ori r12, r12, 0x1a0 mts rmsr, r12
- /* TODO: Redo this code to call board_init_f_mem() */ + /* TODO: Redo this code to call board_init_f_*() */ clear_bss: /* clear BSS segments */ addi r5, r0, __bss_start diff --git a/arch/nios2/cpu/start.S b/arch/nios2/cpu/start.S index 54787c5..204d0cd 100644 --- a/arch/nios2/cpu/start.S +++ b/arch/nios2/cpu/start.S @@ -106,14 +106,18 @@ _reloc: stw r0, 4(sp) mov fp, sp
- /* Allocate and zero GD, update SP */ + /* Allocate and initialize reserved area, update SP */ mov r4, sp - movhi r2, %hi(board_init_f_mem@h) - ori r2, r2, %lo(board_init_f_mem@h) + movhi r2, %hi(board_init_f_alloc_reserve@h) + ori r2, r2, %lo(board_init_f_alloc_reserve@h) callr r2 - - /* Update stack- and frame-pointers */ mov sp, r2 + mov r4, sp + movhi r2, %hi(board_init_f_init_reserve@h) + ori r2, r2, %lo(board_init_f_init_reserve@h) + callr r2 + + /* Update frame-pointer */ mov fp, sp
/* Call board_init_f -- never returns */ diff --git a/arch/powerpc/cpu/ppc4xx/start.S b/arch/powerpc/cpu/ppc4xx/start.S index 77d4040..cb63ab1 100644 --- a/arch/powerpc/cpu/ppc4xx/start.S +++ b/arch/powerpc/cpu/ppc4xx/start.S @@ -762,8 +762,9 @@ _start: bl cpu_init_f /* run low-level CPU init code (from Flash) */ #ifdef CONFIG_SYS_GENERIC_BOARD mr r3, r1 - bl board_init_f_mem + bl board_init_f_alloc_reserve mr r1, r3 + bl board_init_f_init_reserve li r0,0 stwu r0, -4(r1) stwu r0, -4(r1) @@ -1038,8 +1039,9 @@ _start: bl cpu_init_f /* run low-level CPU init code (from Flash) */ #ifdef CONFIG_SYS_GENERIC_BOARD mr r3, r1 - bl board_init_f_mem + bl board_init_f_alloc_reserve mr r1, r3 + bl board_init_f_init_reserve stwu r0, -4(r1) stwu r0, -4(r1) #endif diff --git a/arch/x86/cpu/start.S b/arch/x86/cpu/start.S index 5b4ee79..485868f 100644 --- a/arch/x86/cpu/start.S +++ b/arch/x86/cpu/start.S @@ -123,8 +123,9 @@ car_init_ret: #endif /* Set up global data */ mov %esp, %eax - call board_init_f_mem + call board_init_f_alloc_reserve mov %eax, %esp + call board_init_f_init_reserve
#ifdef CONFIG_DEBUG_UART call debug_uart_init diff --git a/arch/x86/lib/fsp/fsp_common.c b/arch/x86/lib/fsp/fsp_common.c index 5276ce6..8479af1 100644 --- a/arch/x86/lib/fsp/fsp_common.c +++ b/arch/x86/lib/fsp/fsp_common.c @@ -90,8 +90,8 @@ int x86_fsp_init(void) /* * The second time we enter here, adjust the size of malloc() * pool before relocation. Given gd->malloc_base was adjusted - * after the call to board_init_f_mem() in arch/x86/cpu/start.S, - * we should fix up gd->malloc_limit here. + * after the call to board_init_f_init_reserve() in arch/x86/ + * cpu/start.S, we should fix up gd->malloc_limit here. */ gd->malloc_limit += CONFIG_FSP_SYS_MALLOC_F_LEN; } diff --git a/common/init/board_init.c b/common/init/board_init.c index 1c6126d..e649e07 100644 --- a/common/init/board_init.c +++ b/common/init/board_init.c @@ -29,31 +29,120 @@ __weak void arch_setup_gd(struct global_data *gd_ptr) } #endif /* !CONFIG_X86 */
-ulong board_init_f_mem(ulong top) +/* + * Allocate reserved space for use as 'globals' from 'top' address and + * return 'bottom' address of allocated space + * + * Notes: + * + * Actual reservation cannot be done from within this function as + * it requires altering the C stack pointer, so this will be done by + * the caller upon return from this function. + * + * IMPORTANT: + * + * Alignment constraints may differ for each 'chunk' allocated. For now: + * + * - GD is aligned down on a 16-byte boundary + * + * - the early malloc arena is not aligned, therefore it follows the stack + * alignment constraint of the architecture for which we are bulding. + * + * - GD is allocated last, so that the return value of this functions is + * both the bottom of the reserved area and the address of GD, should + * the calling context need it. + */ + +ulong board_init_f_alloc_reserve(ulong top) +{ + /* Reserve early malloc arena */ +#if defined(CONFIG_SYS_MALLOC_F) + top -= CONFIG_SYS_MALLOC_F_LEN; +#endif + /* LAST : reserve GD (rounded up to a multiple of 16 bytes) */ + top = rounddown(top-sizeof(struct global_data), 16); + + return top; +} + +/* + * Initialize reserved space (which has been safely allocated on the C + * stack from the C runtime environment handling code). + * + * Notes: + * + * Actual reservation was done by the caller; the locations from base + * to base+size-1 (where 'size' is the value returned by the allocation + * function above) can be accessed freely without risk of corrupting the + * C runtime environment. + * + * IMPORTANT: + * + * Upon return from the allocation function above, on some architectures + * the caller will set gd to the lowest reserved location. Therefore, in + * this initialization function, the global data MUST be placed at base. + * + * ALSO IMPORTANT: + * + * On some architectures, gd will already be good when entering this + * function. On others, it will only be good once arch_setup_gd() returns. + * Therefore, global data accesses must be done: + * + * - through gd_ptr if before the call to arch_setup_gd(); + * + * - through gd once arch_setup_gd() has been called. + * + * Do not use 'gd->' until arch_setup_gd() has been called! + * + * IMPORTANT TOO: + * + * Initialization for each "chunk" (GD, early malloc arena...) ends with + * an incrementation line of the form 'base += <some size>'. The last of + * these incrementations seems useless, as base will not be used any + * more after this incrementation; but if/when a new "chunk" is appended, + * this increment will be essential as it will give base right value for + * this new chunk (which will have to end with its own incrementation + * statement). Besides, the compiler's optimizer will silently detect + * and remove the last base incrementation, therefore leaving that last + * (seemingly useless) incrementation causes no code increase. + */ + +void board_init_f_init_reserve(ulong base) { struct global_data *gd_ptr; #ifndef _USE_MEMCPY int *ptr; #endif
- /* Leave space for the stack we are running with now */ - top -= 0x40; + /* + * clear GD entirely and set it up. + * Use gd_ptr, as gd may not be properly set yet. + */
- top -= sizeof(struct global_data); - top = ALIGN(top, 16); - gd_ptr = (struct global_data *)top; + gd_ptr = (struct global_data *)base; + /* zero the area */ #ifdef _USE_MEMCPY memset(gd_ptr, '\0', sizeof(*gd)); #else for (ptr = (int *)gd_ptr; ptr < (int *)(gd_ptr + 1); ) *ptr++ = 0; #endif + /* set GD unless architecture did it already */ +#ifndef CONFIG_X86 arch_setup_gd(gd_ptr); +#endif + /* next alloc will be higher by one GD plus 16-byte alignment */ + base += roundup(sizeof(struct global_data), 16); + + /* + * record early malloc arena start. + * Use gd as it is now properly set for all architectures. + */
#if defined(CONFIG_SYS_MALLOC_F) - top -= CONFIG_SYS_MALLOC_F_LEN; - gd->malloc_base = top; + /* go down one 'early malloc arena' */ + gd->malloc_base = base; + /* next alloc will be higher by one 'early malloc arena' size */ + base += CONFIG_SYS_MALLOC_F_LEN; #endif - - return top; } diff --git a/include/common.h b/include/common.h index e910730..3d87de3 100644 --- a/include/common.h +++ b/include/common.h @@ -224,32 +224,26 @@ void board_init_f(ulong); void board_init_r(gd_t *, ulong) __attribute__ ((noreturn));
/** - * board_init_f_mem() - Allocate global data and set stack position + * ulong board_init_f_alloc_reserve - allocate reserved area * * This function is called by each architecture very early in the start-up - * code to set up the environment for board_init_f(). It allocates space for - * global_data (see include/asm-generic/global_data.h) and places the stack - * below this. + * code to allow the C runtime to reserve space on the stack for writable + * 'globals' such as GD and the malloc arena. * - * This function requires a stack[1] Normally this is at @top. The function - * starts allocating space from 64 bytes below @top. First it creates space - * for global_data. Then it calls arch_setup_gd() which sets gd to point to - * the global_data space and can reserve additional bytes of space if - * required). Finally it allocates early malloc() memory - * (CONFIG_SYS_MALLOC_F_LEN). The new top of the stack is just below this, - * and it returned by this function. + * @top: top of the reserve area, growing down. + * @return: bottom of reserved area + */ +ulong board_init_f_alloc_reserve(ulong top); + +/** + * board_init_f_init_reserve - initialize the reserved area(s) * - * [1] Strictly speaking it would be possible to implement this function - * in C on many archs such that it does not require a stack. However this - * does not seem hugely important as only 64 byte are wasted. The 64 bytes - * are used to handle the calling standard which generally requires pushing - * addresses or registers onto the stack. We should be able to get away with - * less if this becomes important. + * This function is called once the C runtime has allocated the reserved + * area on the stack. It must initialize the GD at the base of that area. * - * @top: Top of available memory, also normally the top of the stack - * @return: New stack location + * @base: top from which reservation was done */ -ulong board_init_f_mem(ulong top); +void board_init_f_init_reserve(ulong base);
/** * arch_setup_gd() - Set up the global_data pointer