This patch series depends on the following patch:
[U-Boot,v4,03/10] ARM: non-sec: reset CNTVOFF to zero
Before switching to non-secure, make sure that CNTVOFF is set to zero on all CPUs. Otherwise, kernel running in non-secure without HYP enabled (hence using virtual timers) may observe timers that are not synchronized, effectively seeing time going backward...
Patch work: http://patchwork.ozlabs.org/patch/343084/
Xiubo Li (4): ARM: fix the ARCH Timer frequency setting. ARM: add the pen address byte reverting support. ARM: LS1021A: enable ARMv7 virt support for LS1021A A7 ARM: LS1021A: to allow non-secure R/W access for all devices' mapped region
arch/arm/cpu/armv7/ls102xa/cpu.c | 12 +++ arch/arm/cpu/armv7/nonsec_virt.S | 7 +- arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h | 98 +++++++++++++++++-- board/freescale/ls1021aqds/ls1021aqds.c | 110 +++++++++++++++++++-- board/freescale/ls1021atwr/ls1021atwr.c | 111 ++++++++++++++++++++-- include/configs/ls1021aqds.h | 9 ++ include/configs/ls1021atwr.h | 9 ++ 7 files changed, 333 insertions(+), 23 deletions(-)