From: Fabio Estevam fabio.estevam@freescale.com
Similarly as mx25 and mx53, mx6solo-lite needs to setup the MII gasket for RMII mode.
Add support for mx6solo-lite.
Signed-off-by: Fabio Estevam fabio.estevam@freescale.com --- Based on FSL BSP, which uses U-boot 2013.04.
Changes since v1: - None
drivers/net/fec_mxc.c | 2 +- drivers/net/fec_mxc.h | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c index e14a359..f4a0c5d 100644 --- a/drivers/net/fec_mxc.c +++ b/drivers/net/fec_mxc.c @@ -453,7 +453,7 @@ static int fec_open(struct eth_device *edev) */ writel(readl(&fec->eth->ecntrl) | FEC_ECNTRL_ETHER_EN, &fec->eth->ecntrl); -#if defined(CONFIG_MX25) || defined(CONFIG_MX53) +#if defined(CONFIG_MX25) || defined(CONFIG_MX53) || defined(CONFIG_MX6SL) udelay(100); /* * setup the MII gasket for RMII mode diff --git a/drivers/net/fec_mxc.h b/drivers/net/fec_mxc.h index 4b4f8b7..0717cc6 100644 --- a/drivers/net/fec_mxc.h +++ b/drivers/net/fec_mxc.h @@ -135,7 +135,7 @@ struct ethernet_regs {
uint32_t res14[7]; /* MBAR_ETH + 0x2E4-2FC */
-#if defined(CONFIG_MX25) || defined(CONFIG_MX53) +#if defined(CONFIG_MX25) || defined(CONFIG_MX53) || defined(CONFIG_MX6SL) uint16_t miigsk_cfgr; /* MBAR_ETH + 0x300 */ uint16_t res15[3]; /* MBAR_ETH + 0x302-306 */ uint16_t miigsk_enr; /* MBAR_ETH + 0x308 */ @@ -202,7 +202,7 @@ struct ethernet_regs { #define FEC_X_DES_ACTIVE_TDAR 0x01000000 #define FEC_R_DES_ACTIVE_RDAR 0x01000000
-#if defined(CONFIG_MX25) || defined(CONFIG_MX53) +#if defined(CONFIG_MX25) || defined(CONFIG_MX53) || defined(CONFIG_MX6SL) /* defines for MIIGSK */ /* RMII frequency control: 0=50MHz, 1=5MHz */ #define MIIGSK_CFGR_FRCONT (1 << 6)