In a few places, the booti command is used to handle a boot. We want these to be done without needing CONFIG_CMDLINE, so add a new booti_run() function to handle this.
So far this is not used.
Signed-off-by: Simon Glass sjg@chromium.org ---
Changes in v2: - Rework series to allow OS access to cmdline arguments for bootm
boot/bootm.c | 13 +++++++++++++ include/bootm.h | 13 +++++++++++++ 2 files changed, 26 insertions(+)
diff --git a/boot/bootm.c b/boot/bootm.c index 1c5a99817a82..248341c927d9 100644 --- a/boot/bootm.c +++ b/boot/bootm.c @@ -1155,6 +1155,19 @@ int bootz_run(struct bootm_info *bmi) return bootm_run_states(bmi, states); }
+int booti_run(struct bootm_info *bmi) +{ + int states; + + bmi->cmd_name = "booti"; + states = BOOTM_STATE_MEASURE | BOOTM_STATE_OS_PREP | + BOOTM_STATE_OS_FAKE_GO | BOOTM_STATE_OS_GO; + if (IS_ENABLED(CONFIG_SYS_BOOT_RAMDISK_HIGH)) + states |= BOOTM_STATE_RAMDISK; + + return bootm_run_states(bmi, states); +} + int bootm_boot_start(ulong addr, const char *cmdline) { char addr_str[30]; diff --git a/include/bootm.h b/include/bootm.h index 4665c7a24fa5..2245503eb0ea 100644 --- a/include/bootm.h +++ b/include/bootm.h @@ -176,6 +176,19 @@ int bootm_run(struct bootm_info *bmi); */ int bootz_run(struct bootm_info *bmi);
+/** + * booti_run() - Run the entire booti process + * + * This runs through the booti process from start to finish, using the default + * set of states. + * + * This uses bootm_run_states(). + * + * @bmi: bootm information + * Return: 0 if ok, something else on error + */ +int booti_run(struct bootm_info *bmi); + void arch_preboot_os(void);
/*