While discussing at the U-Boot mailing list about i.MX6Q USB host support for U-Boot, there was the question what's about the same for mainline Linux. See below.
I'd like to continue this discussion with a new subject and adding the Linaro mailing list.
On 12.02.2012 09:46, Marek Vasut wrote:
On 11.02.2012 19:46, Fabio Estevam wrote:
On Sat, Feb 11, 2012 at 5:12 AM, Marek Vasutmarek.vasut@gmail.com wrote:
btw Fabio, do we support mx6q USB host in mainline Linux ?
Not yet, Marek.
Linaro has it working with
http://git.linaro.org/gitweb?p=bsp/freescale/linux-linaro.git;a=commit;h=de 941f9ac0b59c34053618e90e3c1f1d8b5a2d22
http://git.linaro.org/gitweb?p=bsp/freescale/linux-linaro.git;a=commit;h=40 26cfa27332f2e53cfbf72cc98cf4db8c2f2127
It shouldn't be that hard to apply these to plain mainline Linux (?).
Do you believe this will be accepted into mainline Linux if basically the same stuff, except for mx28 did NOT get accepted?
Do you have any pointers to the discussion about this? Hopefully we could learn from that.
The shape of the code was almost identical, maybe better. Actually, even the file names are the same here and in the old FSL BSP for mx28.
I think the good news is at least that Linaro is working on a more or less recent kernel (atm 3.2). So, as mentioned above, porting it from the Linaro kernel to the mainline kernel shouldn't be that hard. The next step would be to clean them up, hopefully learning from the mx28 experience mentioned above.
What do you think?
Best regards
Dirk