While inserting them into the new location, keep them sorted by the register base offset just like in the linux kernel device tree.
While at it fix the indentation.
Signed-off-by: Michael Walle michael@walle.cc Reviewed-by: Vladimir Oltean vladimir.oltean@nxp.com --- arch/arm/dts/fsl-ls1028a.dtsi | 64 +++++++++++++++++------------------ 1 file changed, 32 insertions(+), 32 deletions(-)
diff --git a/arch/arm/dts/fsl-ls1028a.dtsi b/arch/arm/dts/fsl-ls1028a.dtsi index 7d18085615..d0f90941b9 100644 --- a/arch/arm/dts/fsl-ls1028a.dtsi +++ b/arch/arm/dts/fsl-ls1028a.dtsi @@ -43,38 +43,6 @@ IRQ_TYPE_LEVEL_LOW)>; };
- pcie1: pcie@3400000 { - compatible = "fsl,ls-pcie", "fsl,ls1028-pcie", "snps,dw-pcie"; - reg = <0x00 0x03400000 0x0 0x80000 - 0x00 0x03480000 0x0 0x40000 /* lut registers */ - 0x00 0x034c0000 0x0 0x40000 /* pf controls registers */ - 0x80 0x00000000 0x0 0x20000>; /* configuration space */ - reg-names = "dbi", "lut", "ctrl", "config"; - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - num-lanes = <4>; - bus-range = <0x0 0xff>; - ranges = <0x81000000 0x0 0x00000000 0x80 0x00020000 0x0 0x00010000 /* downstream I/O */ - 0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ - }; - - pcie2: pcie@3500000 { - compatible = "fsl,ls-pcie", "fsl,ls1028-pcie", "snps,dw-pcie"; - reg = <0x00 0x03500000 0x0 0x80000 - 0x00 0x03580000 0x0 0x40000 /* lut registers */ - 0x00 0x035c0000 0x0 0x40000 /* pf controls registers */ - 0x88 0x00000000 0x0 0x20000>; /* configuration space */ - reg-names = "dbi", "lut", "ctrl", "config"; - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - num-lanes = <4>; - bus-range = <0x0 0xff>; - ranges = <0x81000000 0x0 0x00000000 0x88 0x00020000 0x0 0x00010000 /* downstream I/O */ - 0x82000000 0x0 0x40000000 0x88 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ - }; - pcie@1f0000000 { compatible = "pci-host-ecam-generic"; /* ECAM bus 0, HW has more space reserved but not populated */ @@ -484,5 +452,37 @@ interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; + + pcie1: pcie@3400000 { + compatible = "fsl,ls-pcie", "fsl,ls1028-pcie", "snps,dw-pcie"; + reg = <0x00 0x03400000 0x0 0x80000 + 0x00 0x03480000 0x0 0x40000 /* lut registers */ + 0x00 0x034c0000 0x0 0x40000 /* pf controls registers */ + 0x80 0x00000000 0x0 0x20000>; /* configuration space */ + reg-names = "dbi", "lut", "ctrl", "config"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <4>; + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x00000000 0x80 0x00020000 0x0 0x00010000 /* downstream I/O */ + 0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ + }; + + pcie2: pcie@3500000 { + compatible = "fsl,ls-pcie", "fsl,ls1028-pcie", "snps,dw-pcie"; + reg = <0x00 0x03500000 0x0 0x80000 + 0x00 0x03580000 0x0 0x40000 /* lut registers */ + 0x00 0x035c0000 0x0 0x40000 /* pf controls registers */ + 0x88 0x00000000 0x0 0x20000>; /* configuration space */ + reg-names = "dbi", "lut", "ctrl", "config"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <4>; + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x00000000 0x88 0x00020000 0x0 0x00010000 /* downstream I/O */ + 0x82000000 0x0 0x40000000 0x88 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ + }; }; };