On 2022/2/26 11:37, Marek Vasut wrote:
Add settings for operating PLL at 933 MHz. This setting is useful in case the LPDDR4 DRAM should operate at 1866 MHz or 3733 MT/s.
Is the DDR operation value get from NXP DDR TOOL?
Thanks, Peng.
Signed-off-by: Marek Vasut marex@denx.de Cc: Fabio Estevam festevam@denx.de Cc: Peng Fan peng.fan@nxp.com Cc: Stefano Babic sbabic@denx.de
arch/arm/mach-imx/imx8m/clock_imx8mm.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/arch/arm/mach-imx/imx8m/clock_imx8mm.c b/arch/arm/mach-imx/imx8m/clock_imx8mm.c index 76132defc21..4db55f86081 100644 --- a/arch/arm/mach-imx/imx8m/clock_imx8mm.c +++ b/arch/arm/mach-imx/imx8m/clock_imx8mm.c @@ -48,6 +48,7 @@ int enable_i2c_clk(unsigned char enable, unsigned i2c_num) #ifdef CONFIG_SPL_BUILD static struct imx_int_pll_rate_table imx8mm_fracpll_tbl[] = { PLL_1443X_RATE(1000000000U, 250, 3, 1, 0),
- PLL_1443X_RATE(933000000U, 311, 4, 1, 0), PLL_1443X_RATE(800000000U, 300, 9, 0, 0), PLL_1443X_RATE(750000000U, 250, 8, 0, 0), PLL_1443X_RATE(650000000U, 325, 3, 2, 0),