Hi Josh,
On 05/16/2014 04:15 PM, Josh Wu wrote:
As SAMA5D3 is a at91 ARMv7 cpu, so we should enable LCD DCache flush for SAMA5D3X-EK.
Signed-off-by: Josh Wu josh.wu@atmel.com
arch/arm/cpu/armv7/at91/cpu.c | 6 ++++++ board/atmel/sama5d3xek/sama5d3xek.c | 6 +++++- 2 files changed, 11 insertions(+), 1 deletion(-)
diff --git a/arch/arm/cpu/armv7/at91/cpu.c b/arch/arm/cpu/armv7/at91/cpu.c index 2fbf60d..6f2164f 100644 --- a/arch/arm/cpu/armv7/at91/cpu.c +++ b/arch/arm/cpu/armv7/at91/cpu.c @@ -61,6 +61,12 @@ int print_cpuinfo(void)
void enable_caches(void) { +#ifndef CONFIG_SYS_ICACHE_OFF
- icache_enable();
+#endif
No need this one. Ifdef CONFIG_SYS_ICACHE_OFF, it will be disabled.
+#ifndef CONFIG_SYS_DCACHE_OFF
- dcache_enable();
+#endif }
unsigned int get_chip_id(void) diff --git a/board/atmel/sama5d3xek/sama5d3xek.c b/board/atmel/sama5d3xek/sama5d3xek.c index c835c12..1fc91d9 100644 --- a/board/atmel/sama5d3xek/sama5d3xek.c +++ b/board/atmel/sama5d3xek/sama5d3xek.c @@ -200,8 +200,12 @@ int board_init(void) at91_gmac_hw_init(); #endif #ifdef CONFIG_LCD
- if (has_lcdc())
- if (has_lcdc()) { sama5d3xek_lcd_hw_init();
/* Enable flushing as we enabled dcache */lcd_set_flush_dcache(1);
Why not implement in driver, or else, each SoC enable dcache will need add this.
- } #endif return 0; }
Best Regards, Bo Shen