CONFIG options must not use lower-case letter. Convert this and related ones to upper case.
Signed-off-by: Simon Glass sjg@chromium.org ---
arch/arm/dts/Makefile | 2 +- arch/arm/mach-stm32mp/Kconfig | 4 ++-- arch/arm/mach-stm32mp/Kconfig.13x | 4 ++-- arch/arm/mach-stm32mp/Makefile | 2 +- arch/arm/mach-stm32mp/cmd_stm32key.c | 10 +++++----- arch/arm/mach-stm32mp/fdt.c | 4 ++-- arch/arm/mach-stm32mp/include/mach/stm32.h | 6 +++--- board/st/common/Kconfig | 2 +- board/st/stm32mp1/Kconfig | 2 +- configs/stm32mp13_defconfig | 4 ++-- drivers/clk/stm32/Kconfig | 2 +- 11 files changed, 21 insertions(+), 21 deletions(-)
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index c184c802b45..dc8dcdff218 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -1215,7 +1215,7 @@ dtb-$(CONFIG_ASPEED_AST2600) += ast2600-evb.dtb
dtb-$(CONFIG_ARCH_STI) += stih410-b2260.dtb
-dtb-$(CONFIG_STM32MP13x) += \ +dtb-$(CONFIG_STM32MP13X) += \ stm32mp135f-dk.dtb
dtb-$(CONFIG_STM32MP15x) += \ diff --git a/arch/arm/mach-stm32mp/Kconfig b/arch/arm/mach-stm32mp/Kconfig index db47baba6d1..cf3196b3b3a 100644 --- a/arch/arm/mach-stm32mp/Kconfig +++ b/arch/arm/mach-stm32mp/Kconfig @@ -37,7 +37,7 @@ choice prompt "Select STMicroelectronics STM32MPxxx Soc" default STM32MP15x
-config STM32MP13x +config STM32MP13X bool "Support STMicroelectronics STM32MP13x Soc" select ARM_SMCCC select CPU_V7A @@ -103,7 +103,7 @@ config SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_MMC2
config STM32_ETZPC bool "STM32 Extended TrustZone Protection" - depends on STM32MP15x || STM32MP13x + depends on STM32MP15x || STM32MP13X default y imply BOOTP_SERVERIP help diff --git a/arch/arm/mach-stm32mp/Kconfig.13x b/arch/arm/mach-stm32mp/Kconfig.13x index acc02a5a187..4d74b35055b 100644 --- a/arch/arm/mach-stm32mp/Kconfig.13x +++ b/arch/arm/mach-stm32mp/Kconfig.13x @@ -1,10 +1,10 @@ -if STM32MP13x +if STM32MP13X
choice prompt "STM32MP13x board select" optional
-config TARGET_ST_STM32MP13x +config TARGET_ST_STM32MP13X bool "STMicroelectronics STM32MP13x boards" imply BOOTSTAGE imply CMD_BOOTSTAGE diff --git a/arch/arm/mach-stm32mp/Makefile b/arch/arm/mach-stm32mp/Makefile index a19b2797c8b..90c7c121ec4 100644 --- a/arch/arm/mach-stm32mp/Makefile +++ b/arch/arm/mach-stm32mp/Makefile @@ -8,7 +8,7 @@ obj-y += dram_init.o obj-y += syscon.o obj-y += bsec.o
-obj-$(CONFIG_STM32MP13x) += stm32mp13x.o +obj-$(CONFIG_STM32MP13X) += stm32mp13x.o obj-$(CONFIG_STM32MP15x) += stm32mp15x.o
obj-$(CONFIG_STM32_ECDSA_VERIFY) += ecdsa_romapi.o diff --git a/arch/arm/mach-stm32mp/cmd_stm32key.c b/arch/arm/mach-stm32mp/cmd_stm32key.c index 85be8e23bdb..96407cd9b18 100644 --- a/arch/arm/mach-stm32mp/cmd_stm32key.c +++ b/arch/arm/mach-stm32mp/cmd_stm32key.c @@ -18,7 +18,7 @@ * STM32MP13x: 0b111111 = 0x3F for OTP_SECURED closed device */ #define STM32_OTP_CLOSE_ID 0 -#define STM32_OTP_STM32MP13x_CLOSE_MASK 0x3F +#define STM32_OTP_STM32MP13X_CLOSE_MASK 0x3F #define STM32_OTP_STM32MP15x_CLOSE_MASK BIT(6)
/* PKH is the first element of the key list */ @@ -60,7 +60,7 @@ static u8 stm32key_index;
static u8 get_key_nb(void) { - if (IS_ENABLED(CONFIG_STM32MP13x)) + if (IS_ENABLED(CONFIG_STM32MP13X)) return ARRAY_SIZE(stm32mp13_list);
if (IS_ENABLED(CONFIG_STM32MP15x)) @@ -69,7 +69,7 @@ static u8 get_key_nb(void)
static const struct stm32key *get_key(u8 index) { - if (IS_ENABLED(CONFIG_STM32MP13x)) + if (IS_ENABLED(CONFIG_STM32MP13X)) return &stm32mp13_list[index];
if (IS_ENABLED(CONFIG_STM32MP15x)) @@ -78,8 +78,8 @@ static const struct stm32key *get_key(u8 index)
static u32 get_otp_close_mask(void) { - if (IS_ENABLED(CONFIG_STM32MP13x)) - return STM32_OTP_STM32MP13x_CLOSE_MASK; + if (IS_ENABLED(CONFIG_STM32MP13X)) + return STM32_OTP_STM32MP13X_CLOSE_MASK;
if (IS_ENABLED(CONFIG_STM32MP15x)) return STM32_OTP_STM32MP15x_CLOSE_MASK; diff --git a/arch/arm/mach-stm32mp/fdt.c b/arch/arm/mach-stm32mp/fdt.c index 3b4c05d7451..6b69542ecfc 100644 --- a/arch/arm/mach-stm32mp/fdt.c +++ b/arch/arm/mach-stm32mp/fdt.c @@ -270,7 +270,7 @@ static int stm32_fdt_fixup_etzpc(void *fdt, int soc_node) int offset, shift; u32 addr, status, decprot[ETZPC_DECPROT_NB];
- if (IS_ENABLED(CONFIG_STM32MP13x)) { + if (IS_ENABLED(CONFIG_STM32MP13X)) { array = stm32mp13_ip_addr; array_size = ARRAY_SIZE(stm32mp13_ip_addr); } @@ -491,7 +491,7 @@ int ft_system_setup(void *blob, struct bd_info *bd) cpu = get_cpu_type(); get_soc_name(name);
- if (IS_ENABLED(CONFIG_STM32MP13x)) + if (IS_ENABLED(CONFIG_STM32MP13X)) stm32mp13_fdt_fixup(blob, soc, cpu, name);
if (IS_ENABLED(CONFIG_STM32MP15x)) { diff --git a/arch/arm/mach-stm32mp/include/mach/stm32.h b/arch/arm/mach-stm32mp/include/mach/stm32.h index c85ae6a34ee..1e1f694cb62 100644 --- a/arch/arm/mach-stm32mp/include/mach/stm32.h +++ b/arch/arm/mach-stm32mp/include/mach/stm32.h @@ -32,7 +32,7 @@ #define STM32_USART1_BASE 0x5C000000 #define STM32_USART2_BASE 0x4000E000 #endif -#ifdef CONFIG_STM32MP13x +#ifdef CONFIG_STM32MP13X #define STM32_USART1_BASE 0x4c000000 #define STM32_USART2_BASE 0x4c001000 #endif @@ -130,7 +130,7 @@ enum boot_device { #define TAMP_COPRO_STATE_CRASH 5 #endif
-#ifdef CONFIG_STM32MP13x +#ifdef CONFIG_STM32MP13X #define TAMP_BOOTCOUNT TAMP_BACKUP_REGISTER(31) #define TAMP_BOOT_CONTEXT TAMP_BACKUP_REGISTER(30) #endif @@ -167,7 +167,7 @@ enum forced_boot_mode { #define BSEC_OTP_MAC 57 #define BSEC_OTP_BOARD 59 #endif -#ifdef CONFIG_STM32MP13x +#ifdef CONFIG_STM32MP13X #define BSEC_OTP_RPN 1 #define BSEC_OTP_SERIAL 13 #define BSEC_OTP_MAC 57 diff --git a/board/st/common/Kconfig b/board/st/common/Kconfig index aba3590866e..ba17d3158d1 100644 --- a/board/st/common/Kconfig +++ b/board/st/common/Kconfig @@ -1,7 +1,7 @@ config CMD_STBOARD bool "stboard - command for OTP board information" depends on ARCH_STM32MP - default y if TARGET_ST_STM32MP15x || TARGET_ST_STM32MP13x + default y if TARGET_ST_STM32MP15x || TARGET_ST_STM32MP13X help This compile the stboard command to read and write the board in the OTP. diff --git a/board/st/stm32mp1/Kconfig b/board/st/stm32mp1/Kconfig index 6ab8f80fa45..7d0d41bfea0 100644 --- a/board/st/stm32mp1/Kconfig +++ b/board/st/stm32mp1/Kconfig @@ -12,7 +12,7 @@ config SYS_CONFIG_NAME source "board/st/common/Kconfig" endif
-if TARGET_ST_STM32MP13x +if TARGET_ST_STM32MP13X
config SYS_BOARD default "stm32mp1" diff --git a/configs/stm32mp13_defconfig b/configs/stm32mp13_defconfig index ab824808f9d..7b9718400e8 100644 --- a/configs/stm32mp13_defconfig +++ b/configs/stm32mp13_defconfig @@ -5,10 +5,10 @@ CONFIG_SYS_MALLOC_F_LEN=0x180000 CONFIG_ENV_OFFSET=0x900000 CONFIG_DEFAULT_DEVICE_TREE="stm32mp135f-dk" CONFIG_SYS_PROMPT="STM32MP> " -CONFIG_STM32MP13x=y +CONFIG_STM32MP13X=y CONFIG_DDR_CACHEABLE_SIZE=0x10000000 CONFIG_CMD_STM32KEY=y -CONFIG_TARGET_ST_STM32MP13x=y +CONFIG_TARGET_ST_STM32MP13X=y CONFIG_ENV_OFFSET_REDUND=0x940000 # CONFIG_ARMV7_NONSEC is not set CONFIG_SYS_LOAD_ADDR=0xc2000000 diff --git a/drivers/clk/stm32/Kconfig b/drivers/clk/stm32/Kconfig index 7a34ea23c38..7dbddd032b8 100644 --- a/drivers/clk/stm32/Kconfig +++ b/drivers/clk/stm32/Kconfig @@ -31,7 +31,7 @@ config CLK_STM32MP1 config CLK_STM32MP13 bool "Enable RCC clock driver for STM32MP13" depends on ARCH_STM32MP && CLK - default y if STM32MP13x + default y if STM32MP13X select CLK_STM32_CORE help Enable the STM32 clock (RCC) driver. Enable support for