From: Marek Vasut marek.vasut@gmail.com
Signed-off-by: Marek Vasut marek.vasut@gmail.com Cc: Detlev Zundel dzu@denx.de Cc: Fabio Estevam fabio.estevam@freescale.com Cc: Stefano Babic sbabic@denxde Cc: Wolfgang Denk wd@denx.de --- arch/arm/cpu/arm926ejs/mx28/spl_power_init.c | 120 ++++++++++++-------------- 1 file changed, 56 insertions(+), 64 deletions(-)
diff --git a/arch/arm/cpu/arm926ejs/mx28/spl_power_init.c b/arch/arm/cpu/arm926ejs/mx28/spl_power_init.c index dfb62eb..ac942b4 100644 --- a/arch/arm/cpu/arm926ejs/mx28/spl_power_init.c +++ b/arch/arm/cpu/arm926ejs/mx28/spl_power_init.c @@ -104,6 +104,62 @@ void mx28_power_set_linreg(void) POWER_VDDIOCTRL_LINREG_OFFSET_1STEPS_BELOW); }
+int mx28_get_batt_volt(void) +{ + struct mx28_power_regs *power_regs = + (struct mx28_power_regs *)MXS_POWER_BASE; + uint32_t volt = readl(&power_regs->hw_power_battmonitor); + volt &= POWER_BATTMONITOR_BATT_VAL_MASK; + volt >>= POWER_BATTMONITOR_BATT_VAL_OFFSET; + volt *= 8; + return volt; +} + +int mx28_is_batt_ready(void) +{ + return (mx28_get_batt_volt() >= 3600); +} + +int mx28_is_batt_good(void) +{ + struct mx28_power_regs *power_regs = + (struct mx28_power_regs *)MXS_POWER_BASE; + uint32_t volt = mx28_get_batt_volt(); + + if ((volt >= 2400) && (volt <= 4300)) + return 1; + + clrsetbits_le32(&power_regs->hw_power_5vctrl, + POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK, + 0x3 << POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET); + writel(POWER_5VCTRL_PWD_CHARGE_4P2_MASK, + &power_regs->hw_power_5vctrl_clr); + + clrsetbits_le32(&power_regs->hw_power_charge, + POWER_CHARGE_STOP_ILIMIT_MASK | POWER_CHARGE_BATTCHRG_I_MASK, + POWER_CHARGE_STOP_ILIMIT_10MA | 0x3); + + writel(POWER_CHARGE_PWD_BATTCHRG, &power_regs->hw_power_charge_clr); + writel(POWER_5VCTRL_PWD_CHARGE_4P2_MASK, + &power_regs->hw_power_5vctrl_clr); + + early_delay(500000); + + volt = mx28_get_batt_volt(); + + if (volt >= 3500) + return 0; + + if (volt >= 2400) + return 1; + + writel(POWER_CHARGE_STOP_ILIMIT_MASK | POWER_CHARGE_BATTCHRG_I_MASK, + &power_regs->hw_power_charge_clr); + writel(POWER_CHARGE_PWD_BATTCHRG, &power_regs->hw_power_charge_set); + + return 0; +} + void mx28_power_setup_5v_detect(void) { struct mx28_power_regs *power_regs = @@ -486,22 +542,6 @@ void mx28_handle_5v_conflict(void) } }
-int mx28_get_batt_volt(void) -{ - struct mx28_power_regs *power_regs = - (struct mx28_power_regs *)MXS_POWER_BASE; - uint32_t volt = readl(&power_regs->hw_power_battmonitor); - volt &= POWER_BATTMONITOR_BATT_VAL_MASK; - volt >>= POWER_BATTMONITOR_BATT_VAL_OFFSET; - volt *= 8; - return volt; -} - -int mx28_is_batt_ready(void) -{ - return (mx28_get_batt_volt() >= 3600); -} - void mx28_5v_boot(void) { struct mx28_power_regs *power_regs = @@ -553,54 +593,6 @@ void mx28_switch_vddd_to_dcdc_source(void) POWER_VDDDCTRL_DISABLE_STEPPING); }
-int mx28_is_batt_good(void) -{ - struct mx28_power_regs *power_regs = - (struct mx28_power_regs *)MXS_POWER_BASE; - uint32_t volt; - - volt = readl(&power_regs->hw_power_battmonitor); - volt &= POWER_BATTMONITOR_BATT_VAL_MASK; - volt >>= POWER_BATTMONITOR_BATT_VAL_OFFSET; - volt *= 8; - - if ((volt >= 2400) && (volt <= 4300)) - return 1; - - clrsetbits_le32(&power_regs->hw_power_5vctrl, - POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK, - 0x3 << POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET); - writel(POWER_5VCTRL_PWD_CHARGE_4P2_MASK, - &power_regs->hw_power_5vctrl_clr); - - clrsetbits_le32(&power_regs->hw_power_charge, - POWER_CHARGE_STOP_ILIMIT_MASK | POWER_CHARGE_BATTCHRG_I_MASK, - POWER_CHARGE_STOP_ILIMIT_10MA | 0x3); - - writel(POWER_CHARGE_PWD_BATTCHRG, &power_regs->hw_power_charge_clr); - writel(POWER_5VCTRL_PWD_CHARGE_4P2_MASK, - &power_regs->hw_power_5vctrl_clr); - - early_delay(500000); - - volt = readl(&power_regs->hw_power_battmonitor); - volt &= POWER_BATTMONITOR_BATT_VAL_MASK; - volt >>= POWER_BATTMONITOR_BATT_VAL_OFFSET; - volt *= 8; - - if (volt >= 3500) - return 0; - - if (volt >= 2400) - return 1; - - writel(POWER_CHARGE_STOP_ILIMIT_MASK | POWER_CHARGE_BATTCHRG_I_MASK, - &power_regs->hw_power_charge_clr); - writel(POWER_CHARGE_PWD_BATTCHRG, &power_regs->hw_power_charge_set); - - return 0; -} - void mx28_power_configure_power_source(void) { mx28_src_power_init();