Restructure Stratix 10 SDRAM driver. Move common code to separate file, in preparation to support SDRAM driver for Agilex.
Signed-off-by: Ley Foon Tan ley.foon.tan@intel.com Reviewed-by: Simon Goldschmidt simon.k.r.goldschmidt@gmail.com
--- v6: - Remove compatible "intel,sdr-ctl-agilex" from this patch.
v3: - Change sdram_common.* to sdram_soc64.* --- drivers/ddr/altera/Makefile | 2 +- drivers/ddr/altera/sdram_s10.c | 296 +---------------- drivers/ddr/altera/sdram_s10.h | 148 +-------- drivers/ddr/altera/sdram_soc64.c | 303 ++++++++++++++++++ .../ddr/altera/{sdram_s10.h => sdram_soc64.h} | 70 ++-- 5 files changed, 340 insertions(+), 479 deletions(-) create mode 100644 drivers/ddr/altera/sdram_soc64.c copy drivers/ddr/altera/{sdram_s10.h => sdram_soc64.h} (79%)
diff --git a/drivers/ddr/altera/Makefile b/drivers/ddr/altera/Makefile index 341ac0d73b..eb8da13b7d 100644 --- a/drivers/ddr/altera/Makefile +++ b/drivers/ddr/altera/Makefile @@ -9,5 +9,5 @@ ifdef CONFIG_$(SPL_)ALTERA_SDRAM obj-$(CONFIG_TARGET_SOCFPGA_GEN5) += sdram_gen5.o sequencer.o obj-$(CONFIG_TARGET_SOCFPGA_ARRIA10) += sdram_arria10.o -obj-$(CONFIG_TARGET_SOCFPGA_STRATIX10) += sdram_s10.o +obj-$(CONFIG_TARGET_SOCFPGA_STRATIX10) += sdram_soc64.o sdram_s10.o endif diff --git a/drivers/ddr/altera/sdram_s10.c b/drivers/ddr/altera/sdram_s10.c index d7e6371ddb..fcab3ae3e4 100644 --- a/drivers/ddr/altera/sdram_s10.c +++ b/drivers/ddr/altera/sdram_s10.c @@ -14,28 +14,14 @@ #include "sdram_s10.h" #include <wait_bit.h> #include <asm/arch/firewall.h> -#include <asm/arch/system_manager.h> #include <asm/arch/reset_manager.h> #include <asm/io.h> #include <linux/sizes.h>
-struct altera_sdram_priv { - struct ram_info info; - struct reset_ctl_bulk resets; -}; - -struct altera_sdram_platdata { - void __iomem *hmc; - void __iomem *ddr_sch; - void __iomem *iomhc; -}; - DECLARE_GLOBAL_DATA_PTR;
#define DDR_CONFIG(A, B, C, R) (((A) << 24) | ((B) << 16) | ((C) << 8) | (R))
-#define PGTABLE_OFF 0x4000 - /* The followring are the supported configurations */ u32 ddr_config[] = { /* DDR_CONFIG(Address order,Bank,Column,Row) */ @@ -62,28 +48,6 @@ u32 ddr_config[] = { DDR_CONFIG(1, 4, 10, 17), };
-static u32 hmc_readl(struct altera_sdram_platdata *plat, u32 reg) -{ - return readl(plat->iomhc + reg); -} - -static u32 hmc_ecc_readl(struct altera_sdram_platdata *plat, u32 reg) -{ - return readl(plat->hmc + reg); -} - -static u32 hmc_ecc_writel(struct altera_sdram_platdata *plat, - u32 data, u32 reg) -{ - return writel(data, plat->hmc + reg); -} - -static u32 ddr_sch_writel(struct altera_sdram_platdata *plat, u32 data, - u32 reg) -{ - return writel(data, plat->ddr_sch + reg); -} - int match_ddr_conf(u32 ddr_conf) { int i; @@ -95,193 +59,12 @@ int match_ddr_conf(u32 ddr_conf) return 0; }
-static int emif_clear(struct altera_sdram_platdata *plat) -{ - hmc_ecc_writel(plat, 0, RSTHANDSHAKECTRL); - - return wait_for_bit_le32((const void *)(plat->hmc + - RSTHANDSHAKESTAT), - DDR_HMC_RSTHANDSHAKE_MASK, - false, 1000, false); -} - -static int emif_reset(struct altera_sdram_platdata *plat) -{ - u32 c2s, s2c, ret; - - c2s = hmc_ecc_readl(plat, RSTHANDSHAKECTRL) & DDR_HMC_RSTHANDSHAKE_MASK; - s2c = hmc_ecc_readl(plat, RSTHANDSHAKESTAT) & DDR_HMC_RSTHANDSHAKE_MASK; - - debug("DDR: c2s=%08x s2c=%08x nr0=%08x nr1=%08x nr2=%08x dst=%08x\n", - c2s, s2c, hmc_readl(plat, NIOSRESERVED0), - hmc_readl(plat, NIOSRESERVED1), hmc_readl(plat, NIOSRESERVED2), - hmc_readl(plat, DRAMSTS)); - - if (s2c && emif_clear(plat)) { - printf("DDR: emif_clear() failed\n"); - return -1; - } - - debug("DDR: Triggerring emif reset\n"); - hmc_ecc_writel(plat, DDR_HMC_CORE2SEQ_INT_REQ, RSTHANDSHAKECTRL); - - /* if seq2core[3] = 0, we are good */ - ret = wait_for_bit_le32((const void *)(plat->hmc + - RSTHANDSHAKESTAT), - DDR_HMC_SEQ2CORE_INT_RESP_MASK, - false, 1000, false); - if (ret) { - printf("DDR: failed to get ack from EMIF\n"); - return ret; - } - - ret = emif_clear(plat); - if (ret) { - printf("DDR: emif_clear() failed\n"); - return ret; - } - - debug("DDR: %s triggered successly\n", __func__); - return 0; -} - -static int poll_hmc_clock_status(void) -{ - return wait_for_bit_le32((const void *)(socfpga_get_sysmgr_addr() + - SYSMGR_SOC64_HMC_CLK), - SYSMGR_HMC_CLK_STATUS_MSK, true, 1000, false); -} - -static void sdram_clear_mem(phys_addr_t addr, phys_size_t size) -{ - phys_size_t i; - - if (addr % CONFIG_SYS_CACHELINE_SIZE) { - printf("DDR: address 0x%llx is not cacheline size aligned.\n", - addr); - hang(); - } - - if (size % CONFIG_SYS_CACHELINE_SIZE) { - printf("DDR: size 0x%llx is not multiple of cacheline size\n", - size); - hang(); - } - - /* Use DC ZVA instruction to clear memory to zeros by a cache line */ - for (i = 0; i < size; i = i + CONFIG_SYS_CACHELINE_SIZE) { - asm volatile("dc zva, %0" - : - : "r"(addr) - : "memory"); - addr += CONFIG_SYS_CACHELINE_SIZE; - } -} - -static void sdram_init_ecc_bits(bd_t *bd) -{ - phys_size_t size, size_init; - phys_addr_t start_addr; - int bank = 0; - unsigned int start = get_timer(0); - - icache_enable(); - - start_addr = bd->bi_dram[0].start; - size = bd->bi_dram[0].size; - - /* Initialize small block for page table */ - memset((void *)start_addr, 0, PGTABLE_SIZE + PGTABLE_OFF); - gd->arch.tlb_addr = start_addr + PGTABLE_OFF; - gd->arch.tlb_size = PGTABLE_SIZE; - start_addr += PGTABLE_SIZE + PGTABLE_OFF; - size -= (PGTABLE_OFF + PGTABLE_SIZE); - dcache_enable(); - - while (1) { - while (size) { - size_init = min((phys_addr_t)SZ_1G, (phys_addr_t)size); - sdram_clear_mem(start_addr, size_init); - size -= size_init; - start_addr += size_init; - WATCHDOG_RESET(); - } - - bank++; - if (bank >= CONFIG_NR_DRAM_BANKS) - break; - - start_addr = bd->bi_dram[bank].start; - size = bd->bi_dram[bank].size; - } - - dcache_disable(); - icache_disable(); - - printf("SDRAM-ECC: Initialized success with %d ms\n", - (unsigned int)get_timer(start)); -} - -static void sdram_size_check(bd_t *bd) -{ - phys_size_t total_ram_check = 0; - phys_size_t ram_check = 0; - phys_addr_t start = 0; - int bank; - - /* Sanity check ensure correct SDRAM size specified */ - debug("DDR: Running SDRAM size sanity check\n"); - - for (bank = 0; bank < CONFIG_NR_DRAM_BANKS; bank++) { - start = bd->bi_dram[bank].start; - while (ram_check < bd->bi_dram[bank].size) { - ram_check += get_ram_size((void *)(start + ram_check), - (phys_size_t)SZ_1G); - } - total_ram_check += ram_check; - ram_check = 0; - } - - /* If the ram_size is 2GB smaller, we can assume the IO space is - * not mapped in. gd->ram_size is the actual size of the dram - * not the accessible size. - */ - if (total_ram_check != gd->ram_size) { - puts("DDR: SDRAM size check failed!\n"); - hang(); - } - - debug("DDR: SDRAM size check passed!\n"); -} - -/** - * sdram_calculate_size() - Calculate SDRAM size - * - * Calculate SDRAM device size based on SDRAM controller parameters. - * Size is specified in bytes. - */ -static phys_size_t sdram_calculate_size(struct altera_sdram_platdata *plat) -{ - u32 dramaddrw = hmc_readl(plat, DRAMADDRW); - - phys_size_t size = 1 << (DRAMADDRW_CFG_CS_ADDR_WIDTH(dramaddrw) + - DRAMADDRW_CFG_BANK_GRP_ADDR_WIDTH(dramaddrw) + - DRAMADDRW_CFG_BANK_ADDR_WIDTH(dramaddrw) + - DRAMADDRW_CFG_ROW_ADDR_WIDTH(dramaddrw) + - DRAMADDRW_CFG_COL_ADDR_WIDTH(dramaddrw)); - - size *= (2 << (hmc_ecc_readl(plat, DDRIOCTRL) & - DDR_HMC_DDRIOCTRL_IOSIZE_MSK)); - - return size; -} - /** * sdram_mmr_init_full() - Function to initialize SDRAM MMR * * Initialize the SDRAM MMR. */ -static int sdram_mmr_init_full(struct udevice *dev) +int sdram_mmr_init_full(struct udevice *dev) { struct altera_sdram_platdata *plat = dev->platdata; struct altera_sdram_priv *priv = dev_get_priv(dev); @@ -534,80 +317,3 @@ static int sdram_mmr_init_full(struct udevice *dev) return 0; }
-static int altera_sdram_ofdata_to_platdata(struct udevice *dev) -{ - struct altera_sdram_platdata *plat = dev->platdata; - fdt_addr_t addr; - - addr = dev_read_addr_index(dev, 0); - if (addr == FDT_ADDR_T_NONE) - return -EINVAL; - plat->ddr_sch = (void __iomem *)addr; - - addr = dev_read_addr_index(dev, 1); - if (addr == FDT_ADDR_T_NONE) - return -EINVAL; - plat->iomhc = (void __iomem *)addr; - - addr = dev_read_addr_index(dev, 2); - if (addr == FDT_ADDR_T_NONE) - return -EINVAL; - plat->hmc = (void __iomem *)addr; - - return 0; -} - -static int altera_sdram_probe(struct udevice *dev) -{ - int ret; - struct altera_sdram_priv *priv = dev_get_priv(dev); - - ret = reset_get_bulk(dev, &priv->resets); - if (ret) { - dev_err(dev, "Can't get reset: %d\n", ret); - return -ENODEV; - } - reset_deassert_bulk(&priv->resets); - - if (sdram_mmr_init_full(dev) != 0) { - puts("SDRAM init failed.\n"); - goto failed; - } - - return 0; - -failed: - reset_release_bulk(&priv->resets); - return -ENODEV; -} - -static int altera_sdram_get_info(struct udevice *dev, - struct ram_info *info) -{ - struct altera_sdram_priv *priv = dev_get_priv(dev); - - info->base = priv->info.base; - info->size = priv->info.size; - - return 0; -} - -static struct ram_ops altera_sdram_ops = { - .get_info = altera_sdram_get_info, -}; - -static const struct udevice_id altera_sdram_ids[] = { - { .compatible = "altr,sdr-ctl-s10" }, - { /* sentinel */ } -}; - -U_BOOT_DRIVER(altera_sdram) = { - .name = "altr_sdr_ctl", - .id = UCLASS_RAM, - .of_match = altera_sdram_ids, - .ops = &altera_sdram_ops, - .ofdata_to_platdata = altera_sdram_ofdata_to_platdata, - .platdata_auto_alloc_size = sizeof(struct altera_sdram_platdata), - .probe = altera_sdram_probe, - .priv_auto_alloc_size = sizeof(struct altera_sdram_priv), -}; diff --git a/drivers/ddr/altera/sdram_s10.h b/drivers/ddr/altera/sdram_s10.h index 096c06cba2..cca4cb35ec 100644 --- a/drivers/ddr/altera/sdram_s10.h +++ b/drivers/ddr/altera/sdram_s10.h @@ -11,48 +11,6 @@ #define DDR_READ_LATENCY_DELAY 40 #define DDR_ACTIVATE_FAWBANK 0x1
-/* ECC HMC registers */ -#define DDRIOCTRL 0x8 -#define DDRCALSTAT 0xc -#define DRAMADDRWIDTH 0xe0 -#define ECCCTRL1 0x100 -#define ECCCTRL2 0x104 -#define ERRINTEN 0x110 -#define ERRINTENS 0x114 -#define INTMODE 0x11c -#define INTSTAT 0x120 -#define AUTOWB_CORRADDR 0x138 -#define ECC_REG2WRECCDATABUS 0x144 -#define ECC_DIAGON 0x150 -#define ECC_DECSTAT 0x154 -#define HPSINTFCSEL 0x210 -#define RSTHANDSHAKECTRL 0x214 -#define RSTHANDSHAKESTAT 0x218 - -#define DDR_HMC_DDRIOCTRL_IOSIZE_MSK 0x00000003 -#define DDR_HMC_DDRCALSTAT_CAL_MSK BIT(0) -#define DDR_HMC_ECCCTL_AWB_CNT_RST_SET_MSK BIT(16) -#define DDR_HMC_ECCCTL_CNT_RST_SET_MSK BIT(8) -#define DDR_HMC_ECCCTL_ECC_EN_SET_MSK BIT(0) -#define DDR_HMC_ECCCTL2_RMW_EN_SET_MSK BIT(8) -#define DDR_HMC_ECCCTL2_AWB_EN_SET_MSK BIT(0) -#define DDR_HMC_ECC_DIAGON_ECCDIAGON_EN_SET_MSK BIT(16) -#define DDR_HMC_ECC_DIAGON_WRDIAGON_EN_SET_MSK BIT(0) -#define DDR_HMC_ERRINTEN_SERRINTEN_EN_SET_MSK BIT(0) -#define DDR_HMC_ERRINTEN_DERRINTEN_EN_SET_MSK BIT(1) -#define DDR_HMC_INTSTAT_SERRPENA_SET_MSK BIT(0) -#define DDR_HMC_INTSTAT_DERRPENA_SET_MSK BIT(1) -#define DDR_HMC_INTSTAT_ADDRMTCFLG_SET_MSK BIT(16) -#define DDR_HMC_INTMODE_INTMODE_SET_MSK BIT(0) -#define DDR_HMC_RSTHANDSHAKE_MASK 0x000000ff -#define DDR_HMC_CORE2SEQ_INT_REQ 0xF -#define DDR_HMC_SEQ2CORE_INT_RESP_MASK BIT(3) -#define DDR_HMC_HPSINTFCSEL_ENABLE_MASK 0x001f1f1f - -#define DDR_HMC_ERRINTEN_INTMASK \ - (DDR_HMC_ERRINTEN_SERRINTEN_EN_SET_MSK | \ - DDR_HMC_ERRINTEN_DERRINTEN_EN_SET_MSK) - /* NOC DDR scheduler */ #define DDR_SCH_ID_COREID 0 #define DDR_SCH_ID_REVID 0x4 @@ -79,110 +37,6 @@ #define DDR_SCH_DEVTODEV_BUSRDTOWR_OFF 2 #define DDR_SCH_DEVTODEV_BUSWRTORD_OFF 4
-/* HMC MMR IO48 registers */ -#define CTRLCFG0 0x28 -#define CTRLCFG1 0x2c -#define DRAMTIMING0 0x50 -#define CALTIMING0 0x7c -#define CALTIMING1 0x80 -#define CALTIMING2 0x84 -#define CALTIMING3 0x88 -#define CALTIMING4 0x8c -#define CALTIMING9 0xa0 -#define DRAMADDRW 0xa8 -#define DRAMSTS 0xec -#define NIOSRESERVED0 0x110 -#define NIOSRESERVED1 0x114 -#define NIOSRESERVED2 0x118 - -#define DRAMADDRW_CFG_COL_ADDR_WIDTH(x) \ - (((x) >> 0) & 0x1F) -#define DRAMADDRW_CFG_ROW_ADDR_WIDTH(x) \ - (((x) >> 5) & 0x1F) -#define DRAMADDRW_CFG_BANK_ADDR_WIDTH(x) \ - (((x) >> 10) & 0xF) -#define DRAMADDRW_CFG_BANK_GRP_ADDR_WIDTH(x) \ - (((x) >> 14) & 0x3) -#define DRAMADDRW_CFG_CS_ADDR_WIDTH(x) \ - (((x) >> 16) & 0x7) - -#define CTRLCFG0_CFG_MEMTYPE(x) \ - (((x) >> 0) & 0xF) -#define CTRLCFG0_CFG_DIMM_TYPE(x) \ - (((x) >> 4) & 0x7) -#define CTRLCFG0_CFG_AC_POS(x) \ - (((x) >> 7) & 0x3) -#define CTRLCFG0_CFG_CTRL_BURST_LEN(x) \ - (((x) >> 9) & 0x1F) - -#define CTRLCFG1_CFG_DBC3_BURST_LEN(x) \ - (((x) >> 0) & 0x1F) -#define CTRLCFG1_CFG_ADDR_ORDER(x) \ - (((x) >> 5) & 0x3) -#define CTRLCFG1_CFG_CTRL_EN_ECC(x) \ - (((x) >> 7) & 0x1) - -#define DRAMTIMING0_CFG_TCL(x) \ - (((x) >> 0) & 0x7F) - -#define CALTIMING0_CFG_ACT_TO_RDWR(x) \ - (((x) >> 0) & 0x3F) -#define CALTIMING0_CFG_ACT_TO_PCH(x) \ - (((x) >> 6) & 0x3F) -#define CALTIMING0_CFG_ACT_TO_ACT(x) \ - (((x) >> 12) & 0x3F) -#define CALTIMING0_CFG_ACT_TO_ACT_DB(x) \ - (((x) >> 18) & 0x3F) - -#define CALTIMING1_CFG_RD_TO_RD(x) \ - (((x) >> 0) & 0x3F) -#define CALTIMING1_CFG_RD_TO_RD_DC(x) \ - (((x) >> 6) & 0x3F) -#define CALTIMING1_CFG_RD_TO_RD_DB(x) \ - (((x) >> 12) & 0x3F) -#define CALTIMING1_CFG_RD_TO_WR(x) \ - (((x) >> 18) & 0x3F) -#define CALTIMING1_CFG_RD_TO_WR_DC(x) \ - (((x) >> 24) & 0x3F) - -#define CALTIMING2_CFG_RD_TO_WR_DB(x) \ - (((x) >> 0) & 0x3F) -#define CALTIMING2_CFG_RD_TO_WR_PCH(x) \ - (((x) >> 6) & 0x3F) -#define CALTIMING2_CFG_RD_AP_TO_VALID(x) \ - (((x) >> 12) & 0x3F) -#define CALTIMING2_CFG_WR_TO_WR(x) \ - (((x) >> 18) & 0x3F) -#define CALTIMING2_CFG_WR_TO_WR_DC(x) \ - (((x) >> 24) & 0x3F) - -#define CALTIMING3_CFG_WR_TO_WR_DB(x) \ - (((x) >> 0) & 0x3F) -#define CALTIMING3_CFG_WR_TO_RD(x) \ - (((x) >> 6) & 0x3F) -#define CALTIMING3_CFG_WR_TO_RD_DC(x) \ - (((x) >> 12) & 0x3F) -#define CALTIMING3_CFG_WR_TO_RD_DB(x) \ - (((x) >> 18) & 0x3F) -#define CALTIMING3_CFG_WR_TO_PCH(x) \ - (((x) >> 24) & 0x3F) - -#define CALTIMING4_CFG_WR_AP_TO_VALID(x) \ - (((x) >> 0) & 0x3F) -#define CALTIMING4_CFG_PCH_TO_VALID(x) \ - (((x) >> 6) & 0x3F) -#define CALTIMING4_CFG_PCH_ALL_TO_VALID(x) \ - (((x) >> 12) & 0x3F) -#define CALTIMING4_CFG_ARF_TO_VALID(x) \ - (((x) >> 18) & 0xFF) -#define CALTIMING4_CFG_PDN_TO_VALID(x) \ - (((x) >> 26) & 0x3F) - -#define CALTIMING9_CFG_4_ACT_TO_ACT(x) \ - (((x) >> 0) & 0xFF) - -/* Firewall DDR scheduler MPFE */ -#define FW_HMC_ADAPTOR_REG_ADDR 0xf8020004 -#define FW_HMC_ADAPTOR_MPU_MASK BIT(0) +#include "sdram_soc64.h"
#endif /* _SDRAM_S10_H_ */ diff --git a/drivers/ddr/altera/sdram_soc64.c b/drivers/ddr/altera/sdram_soc64.c new file mode 100644 index 0000000000..1ae088b547 --- /dev/null +++ b/drivers/ddr/altera/sdram_soc64.c @@ -0,0 +1,303 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2016-2019 Intel Corporation <www.intel.com> + * + */ + +#include <common.h> +#include <dm.h> +#include <errno.h> +#include <div64.h> +#include <fdtdec.h> +#include <ram.h> +#include <reset.h> +#include "sdram_soc64.h" +#include <wait_bit.h> +#include <asm/arch/firewall.h> +#include <asm/arch/system_manager.h> +#include <asm/arch/reset_manager.h> +#include <asm/io.h> +#include <linux/sizes.h> + +#define PGTABLE_OFF 0x4000 + +u32 hmc_readl(struct altera_sdram_platdata *plat, u32 reg) +{ + return readl(plat->iomhc + reg); +} + +u32 hmc_ecc_readl(struct altera_sdram_platdata *plat, u32 reg) +{ + return readl(plat->hmc + reg); +} + +u32 hmc_ecc_writel(struct altera_sdram_platdata *plat, + u32 data, u32 reg) +{ + return writel(data, plat->hmc + reg); +} + +u32 ddr_sch_writel(struct altera_sdram_platdata *plat, u32 data, + u32 reg) +{ + return writel(data, plat->ddr_sch + reg); +} + +int emif_clear(struct altera_sdram_platdata *plat) +{ + hmc_ecc_writel(plat, 0, RSTHANDSHAKECTRL); + + return wait_for_bit_le32((const void *)(plat->hmc + + RSTHANDSHAKESTAT), + DDR_HMC_RSTHANDSHAKE_MASK, + false, 1000, false); +} + +int emif_reset(struct altera_sdram_platdata *plat) +{ + u32 c2s, s2c, ret; + + c2s = hmc_ecc_readl(plat, RSTHANDSHAKECTRL) & DDR_HMC_RSTHANDSHAKE_MASK; + s2c = hmc_ecc_readl(plat, RSTHANDSHAKESTAT) & DDR_HMC_RSTHANDSHAKE_MASK; + + debug("DDR: c2s=%08x s2c=%08x nr0=%08x nr1=%08x nr2=%08x dst=%08x\n", + c2s, s2c, hmc_readl(plat, NIOSRESERVED0), + hmc_readl(plat, NIOSRESERVED1), hmc_readl(plat, NIOSRESERVED2), + hmc_readl(plat, DRAMSTS)); + + if (s2c && emif_clear(plat)) { + printf("DDR: emif_clear() failed\n"); + return -1; + } + + debug("DDR: Triggerring emif reset\n"); + hmc_ecc_writel(plat, DDR_HMC_CORE2SEQ_INT_REQ, RSTHANDSHAKECTRL); + + /* if seq2core[3] = 0, we are good */ + ret = wait_for_bit_le32((const void *)(plat->hmc + + RSTHANDSHAKESTAT), + DDR_HMC_SEQ2CORE_INT_RESP_MASK, + false, 1000, false); + if (ret) { + printf("DDR: failed to get ack from EMIF\n"); + return ret; + } + + ret = emif_clear(plat); + if (ret) { + printf("DDR: emif_clear() failed\n"); + return ret; + } + + debug("DDR: %s triggered successly\n", __func__); + return 0; +} + +int poll_hmc_clock_status(void) +{ + return wait_for_bit_le32((const void *)(socfpga_get_sysmgr_addr() + + SYSMGR_SOC64_HMC_CLK), + SYSMGR_HMC_CLK_STATUS_MSK, true, 1000, false); +} + +void sdram_clear_mem(phys_addr_t addr, phys_size_t size) +{ + phys_size_t i; + + if (addr % CONFIG_SYS_CACHELINE_SIZE) { + printf("DDR: address 0x%llx is not cacheline size aligned.\n", + addr); + hang(); + } + + if (size % CONFIG_SYS_CACHELINE_SIZE) { + printf("DDR: size 0x%llx is not multiple of cacheline size\n", + size); + hang(); + } + + /* Use DC ZVA instruction to clear memory to zeros by a cache line */ + for (i = 0; i < size; i = i + CONFIG_SYS_CACHELINE_SIZE) { + asm volatile("dc zva, %0" + : + : "r"(addr) + : "memory"); + addr += CONFIG_SYS_CACHELINE_SIZE; + } +} + +void sdram_init_ecc_bits(bd_t *bd) +{ + phys_size_t size, size_init; + phys_addr_t start_addr; + int bank = 0; + unsigned int start = get_timer(0); + + icache_enable(); + + start_addr = bd->bi_dram[0].start; + size = bd->bi_dram[0].size; + + /* Initialize small block for page table */ + memset((void *)start_addr, 0, PGTABLE_SIZE + PGTABLE_OFF); + gd->arch.tlb_addr = start_addr + PGTABLE_OFF; + gd->arch.tlb_size = PGTABLE_SIZE; + start_addr += PGTABLE_SIZE + PGTABLE_OFF; + size -= (PGTABLE_OFF + PGTABLE_SIZE); + dcache_enable(); + + while (1) { + while (size) { + size_init = min((phys_addr_t)SZ_1G, (phys_addr_t)size); + sdram_clear_mem(start_addr, size_init); + size -= size_init; + start_addr += size_init; + WATCHDOG_RESET(); + } + + bank++; + if (bank >= CONFIG_NR_DRAM_BANKS) + break; + + start_addr = bd->bi_dram[bank].start; + size = bd->bi_dram[bank].size; + } + + dcache_disable(); + icache_disable(); + + printf("SDRAM-ECC: Initialized success with %d ms\n", + (unsigned int)get_timer(start)); +} + +void sdram_size_check(bd_t *bd) +{ + phys_size_t total_ram_check = 0; + phys_size_t ram_check = 0; + phys_addr_t start = 0; + int bank; + + /* Sanity check ensure correct SDRAM size specified */ + debug("DDR: Running SDRAM size sanity check\n"); + + for (bank = 0; bank < CONFIG_NR_DRAM_BANKS; bank++) { + start = bd->bi_dram[bank].start; + while (ram_check < bd->bi_dram[bank].size) { + ram_check += get_ram_size((void *)(start + ram_check), + (phys_size_t)SZ_1G); + } + total_ram_check += ram_check; + ram_check = 0; + } + + /* If the ram_size is 2GB smaller, we can assume the IO space is + * not mapped in. gd->ram_size is the actual size of the dram + * not the accessible size. + */ + if (total_ram_check != gd->ram_size) { + puts("DDR: SDRAM size check failed!\n"); + hang(); + } + + debug("DDR: SDRAM size check passed!\n"); +} + +/** + * sdram_calculate_size() - Calculate SDRAM size + * + * Calculate SDRAM device size based on SDRAM controller parameters. + * Size is specified in bytes. + */ +phys_size_t sdram_calculate_size(struct altera_sdram_platdata *plat) +{ + u32 dramaddrw = hmc_readl(plat, DRAMADDRW); + + phys_size_t size = 1 << (DRAMADDRW_CFG_CS_ADDR_WIDTH(dramaddrw) + + DRAMADDRW_CFG_BANK_GRP_ADDR_WIDTH(dramaddrw) + + DRAMADDRW_CFG_BANK_ADDR_WIDTH(dramaddrw) + + DRAMADDRW_CFG_ROW_ADDR_WIDTH(dramaddrw) + + DRAMADDRW_CFG_COL_ADDR_WIDTH(dramaddrw)); + + size *= (2 << (hmc_ecc_readl(plat, DDRIOCTRL) & + DDR_HMC_DDRIOCTRL_IOSIZE_MSK)); + + return size; +} + +static int altera_sdram_ofdata_to_platdata(struct udevice *dev) +{ + struct altera_sdram_platdata *plat = dev->platdata; + fdt_addr_t addr; + + addr = dev_read_addr_index(dev, 0); + if (addr == FDT_ADDR_T_NONE) + return -EINVAL; + plat->ddr_sch = (void __iomem *)addr; + + addr = dev_read_addr_index(dev, 1); + if (addr == FDT_ADDR_T_NONE) + return -EINVAL; + plat->iomhc = (void __iomem *)addr; + + addr = dev_read_addr_index(dev, 2); + if (addr == FDT_ADDR_T_NONE) + return -EINVAL; + plat->hmc = (void __iomem *)addr; + + return 0; +} + +static int altera_sdram_probe(struct udevice *dev) +{ + int ret; + struct altera_sdram_priv *priv = dev_get_priv(dev); + + ret = reset_get_bulk(dev, &priv->resets); + if (ret) { + dev_err(dev, "Can't get reset: %d\n", ret); + return -ENODEV; + } + reset_deassert_bulk(&priv->resets); + + if (sdram_mmr_init_full(dev) != 0) { + puts("SDRAM init failed.\n"); + goto failed; + } + + return 0; + +failed: + reset_release_bulk(&priv->resets); + return -ENODEV; +} + +static int altera_sdram_get_info(struct udevice *dev, + struct ram_info *info) +{ + struct altera_sdram_priv *priv = dev_get_priv(dev); + + info->base = priv->info.base; + info->size = priv->info.size; + + return 0; +} + +static struct ram_ops altera_sdram_ops = { + .get_info = altera_sdram_get_info, +}; + +static const struct udevice_id altera_sdram_ids[] = { + { .compatible = "altr,sdr-ctl-s10" }, + { /* sentinel */ } +}; + +U_BOOT_DRIVER(altera_sdram) = { + .name = "altr_sdr_ctl", + .id = UCLASS_RAM, + .of_match = altera_sdram_ids, + .ops = &altera_sdram_ops, + .ofdata_to_platdata = altera_sdram_ofdata_to_platdata, + .platdata_auto_alloc_size = sizeof(struct altera_sdram_platdata), + .probe = altera_sdram_probe, + .priv_auto_alloc_size = sizeof(struct altera_sdram_priv), +}; diff --git a/drivers/ddr/altera/sdram_s10.h b/drivers/ddr/altera/sdram_soc64.h similarity index 79% copy from drivers/ddr/altera/sdram_s10.h copy to drivers/ddr/altera/sdram_soc64.h index 096c06cba2..7d018e76d8 100644 --- a/drivers/ddr/altera/sdram_s10.h +++ b/drivers/ddr/altera/sdram_soc64.h @@ -1,15 +1,24 @@ -/* SPDX-License-Identifier: GPL-2.0 - * - * Copyright (C) 2017-2018 Intel Corporation <www.intel.com> - * +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2017-2019 Intel Corporation <www.intel.com> */
-#ifndef _SDRAM_S10_H_ -#define _SDRAM_S10_H_ +#ifndef _SDRAM_SOC64_H_ +#define _SDRAM_SOC64_H_
-#define DDR_TWR 15 -#define DDR_READ_LATENCY_DELAY 40 -#define DDR_ACTIVATE_FAWBANK 0x1 +#include <common.h> +#include <linux/sizes.h> + +struct altera_sdram_priv { + struct ram_info info; + struct reset_ctl_bulk resets; +}; + +struct altera_sdram_platdata { + void __iomem *hmc; + void __iomem *ddr_sch; + void __iomem *iomhc; +};
/* ECC HMC registers */ #define DDRIOCTRL 0x8 @@ -53,32 +62,6 @@ (DDR_HMC_ERRINTEN_SERRINTEN_EN_SET_MSK | \ DDR_HMC_ERRINTEN_DERRINTEN_EN_SET_MSK)
-/* NOC DDR scheduler */ -#define DDR_SCH_ID_COREID 0 -#define DDR_SCH_ID_REVID 0x4 -#define DDR_SCH_DDRCONF 0x8 -#define DDR_SCH_DDRTIMING 0xc -#define DDR_SCH_DDRMODE 0x10 -#define DDR_SCH_READ_LATENCY 0x14 -#define DDR_SCH_ACTIVATE 0x38 -#define DDR_SCH_DEVTODEV 0x3c -#define DDR_SCH_DDR4TIMING 0x40 - -#define DDR_SCH_DDRTIMING_ACTTOACT_OFF 0 -#define DDR_SCH_DDRTIMING_RDTOMISS_OFF 6 -#define DDR_SCH_DDRTIMING_WRTOMISS_OFF 12 -#define DDR_SCH_DDRTIMING_BURSTLEN_OFF 18 -#define DDR_SCH_DDRTIMING_RDTOWR_OFF 21 -#define DDR_SCH_DDRTIMING_WRTORD_OFF 26 -#define DDR_SCH_DDRTIMING_BWRATIO_OFF 31 -#define DDR_SCH_DDRMOD_BWRATIOEXTENDED_OFF 1 -#define DDR_SCH_ACTIVATE_RRD_OFF 0 -#define DDR_SCH_ACTIVATE_FAW_OFF 4 -#define DDR_SCH_ACTIVATE_FAWBANK_OFF 10 -#define DDR_SCH_DEVTODEV_BUSRDTORD_OFF 0 -#define DDR_SCH_DEVTODEV_BUSRDTOWR_OFF 2 -#define DDR_SCH_DEVTODEV_BUSWRTORD_OFF 4 - /* HMC MMR IO48 registers */ #define CTRLCFG0 0x28 #define CTRLCFG1 0x2c @@ -185,4 +168,19 @@ #define FW_HMC_ADAPTOR_REG_ADDR 0xf8020004 #define FW_HMC_ADAPTOR_MPU_MASK BIT(0)
-#endif /* _SDRAM_S10_H_ */ +u32 hmc_readl(struct altera_sdram_platdata *plat, u32 reg); +u32 hmc_ecc_readl(struct altera_sdram_platdata *plat, u32 reg); +u32 hmc_ecc_writel(struct altera_sdram_platdata *plat, + u32 data, u32 reg); +u32 ddr_sch_writel(struct altera_sdram_platdata *plat, u32 data, + u32 reg); +int emif_clear(struct altera_sdram_platdata *plat); +int emif_reset(struct altera_sdram_platdata *plat); +int poll_hmc_clock_status(void); +void sdram_clear_mem(phys_addr_t addr, phys_size_t size); +void sdram_init_ecc_bits(bd_t *bd); +void sdram_size_check(bd_t *bd); +phys_size_t sdram_calculate_size(struct altera_sdram_platdata *plat); +int sdram_mmr_init_full(struct udevice *dev); + +#endif /* _SDRAM_SOC64_H_ */