On Thu, Dec 12, 2013 at 03:19:31PM +0200, Nikita Kiryanov wrote:
Commit "mtd: nand: omap: enable BCH ECC scheme using ELM for generic platform" (d016dc42cedbf6102e100fa9ecb58462edfb14f8) changed the way software ECC is configured, both during boot, and during ecc switch, in a way that is not backwards compatible with older systems:
Older version of omap_gpmc.c always assigned ecc.size = 0 when configuring for software ecc, relying on nand_scan_tail() to select a default for ecc.size (256), while the new version of omap_gpmc.c assigns ecc.size = pagesize, which is likely to not be 256.
Since 1 bit hamming sw ecc is only meant to be used by legacy devices, revert to the original behavior.
Cc: Igor Grinberg grinberg@compulab.co.il Cc: Tom Rini trini@ti.com Cc: Scott Wood scottwood@freescale.com Cc: Pekon Gupta pekon@ti.com Signed-off-by: Nikita Kiryanov nikita@compulab.co.il Acked-by: Pekon Gupta pekon@ti.com
Changes in V2:
- reworded commit title to better reflect what is being affected (Pekon
Gupta)
drivers/mtd/nand/omap_gpmc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Applied to u-boot-nand-flash.git
-Scott