On 19-02-01 15:13:32, Fabio Estevam wrote:
Hi Abel,
On Fri, Feb 1, 2019 at 2:43 PM Abel Vesa abel.vesa@nxp.com wrote:
The third version is here: https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.den...
So, this time I hope I got it right. Before, I was stupidly trying to put a fit in another fit without a really good reason. To my excuse, that was working even with the spl_image->os set to 0, bug which I (hope) I fixed in the first patch (a new one) of this series.
Thanks for your work on this!
Just to confirm: with this series all sabresd variants (imx6q, imx6dl, imx6qp) boot with the same binary, right?
That is correct.
For mx6sabresd_defconfig, all imx6q_sabresd, imx6qp_sabresd and imx6dl_sabresd have been tested with the same binary.
And I've tested exactly the same the mx6sabreauto_defconfig with all three SoC combinations.
Is there anything known to be not working that used to work before due to missing driver model conversion?
I don't know about anything that might not work. As specified in the cover letter I had to get rid (disable) of EFI, EXT and DOS support in SPL.
Is Ethernet functional?
I haven't tested the ethernet on all of them, just one of each (sabresd/sabreauto).
I'll test them all when I get back at the office tomorrow.
Thanks