From: Ye Li ye.li@nxp.com
Some iMX6 platforms will meet "EHCI timed out on TD" when reading or writing data to USB disk. The root cause is last QTD reports data buffer error. Accroding to RM, this event indicates that an overrun of incoming data or a underrun of outgoing data has occurred for this transaction. This would generally be caused by the host controller not being able to access required data buffers in memory within necessary latency requirements.
Follow kernel's method to fix the issue by disabling stream mode
Signed-off-by: Ye Li ye.li@nxp.com Reviewed-by: Peter Chen peter.chen@nxp.com Signed-off-by: Peng Fan peng.fan@nxp.com --- drivers/usb/host/ehci-mx6.c | 9 +++++++++ 1 file changed, 9 insertions(+)
diff --git a/drivers/usb/host/ehci-mx6.c b/drivers/usb/host/ehci-mx6.c index de0b0c3156..aa0c1c355d 100644 --- a/drivers/usb/host/ehci-mx6.c +++ b/drivers/usb/host/ehci-mx6.c @@ -488,6 +488,11 @@ int ehci_hcd_init(int index, enum usb_init_type init, board_ehci_power(index, (type == USB_INIT_DEVICE) ? 0 : 1); if (type != init) return -ENODEV; + + if (is_mx6dqp() || is_mx6dq() || is_mx6sdl() || + ((is_mx6sl() || is_mx6sx()) && type == USB_INIT_HOST)) + setbits_le32(&ehci->usbmode, SDIS); + if (type == USB_INIT_DEVICE) return 0;
@@ -542,6 +547,10 @@ static int mx6_init_after_reset(struct ehci_ctrl *dev) } #endif
+ if (is_mx6dqp() || is_mx6dq() || is_mx6sdl() || + ((is_mx6sl() || is_mx6sx()) && type == USB_INIT_HOST)) + setbits_le32(&ehci->usbmode, SDIS); + if (type == USB_INIT_DEVICE) return 0;