From: Fabio Estevam fabio.estevam@freescale.com
HSYNC, VSYNC and DISP_CLK are very useful display signals for debugging.
Configure them as active pins.
Signed-off-by: Fabio Estevam fabio.estevam@freescale.com --- Changes since v1: - Add a comment in the code explaining that the purpose of configuring these pins are for debugging
board/freescale/mx6sabresd/mx6sabresd.c | 9 +++++++++ 1 file changed, 9 insertions(+)
diff --git a/board/freescale/mx6sabresd/mx6sabresd.c b/board/freescale/mx6sabresd/mx6sabresd.c index 851cbe9..1d5bba6 100644 --- a/board/freescale/mx6sabresd/mx6sabresd.c +++ b/board/freescale/mx6sabresd/mx6sabresd.c @@ -135,6 +135,12 @@ static void setup_spi(void) imx_iomux_v3_setup_multiple_pads(ecspi1_pads, ARRAY_SIZE(ecspi1_pads)); }
+iomux_v3_cfg_t const di0_pads[] = { + MX6_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK, /* DISP0_CLK */ + MX6_PAD_DI0_PIN2__IPU1_DI0_PIN02, /* DISP0_HSYNC */ + MX6_PAD_DI0_PIN3__IPU1_DI0_PIN03, /* DISP0_VSYNC */ +}; + static void setup_iomux_uart(void) { imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads)); @@ -386,6 +392,9 @@ static void setup_display(void) struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR; int reg;
+ /* Setup HSYNC, VSYNC, DISP_CLK for debugging purposes */ + imx_iomux_v3_setup_multiple_pads(di0_pads, ARRAY_SIZE(di0_pads)); + enable_ipu_clock(); imx_setup_hdmi();