Hi Jerry,
On Tuesday 27 January 2009, Jerry Zhang wrote:
I am porting u-boot to my board. I found it is difficult for me to write the flash driver ( flash.c) of SST39VF1601 by myself. Has anyone ever written this driver? Would you please give me a guide?
Sure this device has been supported many times (e.g. board/esd/common/flash.c). But I suggest to support it now via the legacy infrastructure of the common CFI flash driver. Take a look at the board hcu4 for example:
/* Use common CFI driver */ #define CONFIG_SYS_FLASH_CFI #define CONFIG_FLASH_CFI_DRIVER /* board provides its own flash_init code */ #define CONFIG_FLASH_CFI_LEGACY 1 ...
You will need to add a definition for the 39VF1601 to drivers/mtd/jedec_flash.c though but this shouldn't be too hard.
Best regards, Stefan
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office@denx.de =====================================================================