With SPL and TPL support for the RK3368 in place, mark SPL and TPL as supported from Kconfig for the RK3368. As this is primarily tested on the RK3368-uQ7, we'll leave it to board's individual defconfig to enable.
Also enable DEBUG_UART_BOARD_INIT for the RK3368, so we get output during the early boot-up, as we turn on TPL and SPL.
Signed-off-by: Philipp Tomsich philipp.tomsich@theobroma-systems.com ---
Changes in v2: None
arch/arm/mach-rockchip/Kconfig | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig index 2ad4943..fd08897 100644 --- a/arch/arm/mach-rockchip/Kconfig +++ b/arch/arm/mach-rockchip/Kconfig @@ -67,6 +67,13 @@ config ROCKCHIP_RK3328 config ROCKCHIP_RK3368 bool "Support Rockchip RK3368" select ARM64 + select SUPPORT_SPL + select SUPPORT_TPL + select SPL_SEPARATE_BSS + select SPL_SERIAL_SUPPORT + select TPL_SERIAL_SUPPORT + select ENABLE_ARM_SOC_BOOT0_HOOK + select DEBUG_UART_BOARD_INIT select SYS_NS16550 help The Rockchip RK3368 is a ARM-based SoC with a octa-core (organised