From: Peng Fan peng.fan@nxp.com
pinctrl_wdog already marked u-boot,dm-spl, so clean up board code.
The set_wdog_reset() function is not necessary as this is handled by the imx_watchdog.c driver due to the 'fsl,ext-reset-output' property being set.
Signed-off-by: Peng Fan peng.fan@nxp.com Tested-by: Ariel D'Alessandro ariel.dalessandro@collabora.com --- board/variscite/imx8mn_var_som/spl.c | 11 ----------- 1 file changed, 11 deletions(-)
diff --git a/board/variscite/imx8mn_var_som/spl.c b/board/variscite/imx8mn_var_som/spl.c index 1a8b64fc0a9..41e70505774 100644 --- a/board/variscite/imx8mn_var_som/spl.c +++ b/board/variscite/imx8mn_var_som/spl.c @@ -40,19 +40,8 @@ void spl_board_init(void) puts("Failed to find clock node. Check device tree\n"); }
-#define WDOG_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE) - -static const iomux_v3_cfg_t wdog_pads[] = { - IMX8MN_PAD_GPIO1_IO02__WDOG1_WDOG_B | MUX_PAD_CTRL(WDOG_PAD_CTRL), -}; - int board_early_init_f(void) { - struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR; - - imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads)); - set_wdog_reset(wdog); - init_uart_clk(3);
return 0;