Re: [U-Boot] [PATCH] i.MX6DL/S: add drive-strength back to pads DISP0_DAT2/DAT10

On Wed, Jul 9, 2014 at 4:27 PM, Eric Nelson eric.nelson@boundarydevices.com wrote:

The pad settings for DISP0_DATA02 and DISP0_DAT10 were not set in the same way as DISP0_DAT00-23, causing much flicker in parallel RGB displays on Dual-Lite and Solo processors.

These settings now match the i.MX6 Dual and Quad core versions.

Note that this fixes a regression in commit b47abc3 and that this is the second time we've had a regression on these two pads (See commit e654ddf).

Signed-off-by: Eric Nelson eric.nelson@boundarydevices.com

Acked-by: Otavio Salvador otavio@ossystems.com.br

Stephano, can it be included in the upcoming release?