On Thu, 23 Nov 2017 08:53:10 +0000 "Amartya Shreyank (RBEI/ESD2)" Shreyank.Amartya2@in.bosch.com wrote:
Hi,
I am trying to configure uboot for xip from eim nor for a custom imx6solo board. Can someone suggest what modifications are needed for this in uboot. I have borrowed configurations from imx6 based boards and stripped them down to bare minimum.
Please look into mccmon6 board port (include/mccmon6.h) - it is imx6q.
It uses EIM NOR for booting and storing u-boot/kernel.
Also, if anyone can explain how do we select the values of the following configs: CONFIG_SYS_TEXT_BASE CONFIG_LOADADDR The nor address starts at 0x0800 0000, if I set the CONFIG_SYS_TEXT_BASE as nor start address. The load address inside IVT header is 0x07fff908 which falls outside of NOR region.
Best regards,
Shreyank Amartya RBEI/ESD2
U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de