This patch adds the glue layer for the MIPS Octeon SoCs. Its ported mainly from the Linux code.
Signed-off-by: Stefan Roese sr@denx.de Cc: Bin Meng bmeng.cn@gmail.com Cc: Marek Vasut marex@denx.de ---
drivers/usb/host/Kconfig | 9 + drivers/usb/host/Makefile | 1 + drivers/usb/host/dwc3-octeon-glue.c | 396 ++++++++++++++++++++++++++++ 3 files changed, 406 insertions(+) create mode 100644 drivers/usb/host/dwc3-octeon-glue.c
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 1c374a7bd8..d71c12d888 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -46,6 +46,15 @@ config USB_XHCI_MVEBU SoCs, which includes Armada8K, Armada3700 and other Armada family SoCs.
+config USB_XHCI_OCTEON + bool "Support for Marvell Octeon family on-chip xHCI USB controller" + depends on ARCH_OCTEON + default y + help + Enables support for the on-chip xHCI controller on Marvell Octeon + family SoCs. This is a driver for the dwc3 to provide the glue logic + to configure the controller. + config USB_XHCI_PCI bool "Support for PCI-based xHCI USB controller" depends on DM_USB diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index 29d4f87e38..a12e8f2702 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -56,6 +56,7 @@ obj-$(CONFIG_USB_XHCI_OMAP) += xhci-omap.o obj-$(CONFIG_USB_XHCI_PCI) += xhci-pci.o obj-$(CONFIG_USB_XHCI_RCAR) += xhci-rcar.o obj-$(CONFIG_USB_XHCI_STI) += dwc3-sti-glue.o +obj-$(CONFIG_USB_XHCI_OCTEON) += dwc3-octeon-glue.o
# designware obj-$(CONFIG_USB_DWC2) += dwc2.o diff --git a/drivers/usb/host/dwc3-octeon-glue.c b/drivers/usb/host/dwc3-octeon-glue.c new file mode 100644 index 0000000000..7b1ca7ee33 --- /dev/null +++ b/drivers/usb/host/dwc3-octeon-glue.c @@ -0,0 +1,396 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Octeon family DWC3 specific glue layer + * + * Copyright (C) 2020 Stefan Roese sr@denx.de + * + * The lowlevel init code is based on the Linux driver octeon-usb.c by + * David Daney david.daney@cavium.com, which is: + * Copyright (C) 2010-2017 Cavium Networks + */ + +#include <dm.h> +#include <errno.h> +#include <usb.h> +#include <asm/io.h> +#include <dm/lists.h> +#include <dm/of_access.h> +#include <linux/bitfield.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/usb/dwc3.h> +#include <linux/usb/otg.h> +#include <mach/octeon-model.h> + +DECLARE_GLOBAL_DATA_PTR; + +#define CVMX_GPIO_BIT_CFGX(i) (0x0001070000000900ull + ((i) * 8)) +#define CVMX_GPIO_XBIT_CFGX(i) (0x0001070000000900ull + \ + ((i) & 31) * 8 - 8 * 16) + +#define GPIO_BIT_CFG_TX_OE BIT_ULL(0) +#define GPIO_BIT_CFG_OUTPUT_SEL GENMASK_ULL(20, 16) + +#define UCTL_CTL_UCTL_RST BIT_ULL(0) +#define UCTL_CTL_UAHC_RST BIT_ULL(1) +#define UCTL_CTL_UPHY_RST BIT_ULL(2) +#define UCTL_CTL_DRD_MODE BIT_ULL(3) +#define UCTL_CTL_SCLK_EN BIT_ULL(4) +#define UCTL_CTL_HS_POWER_EN BIT_ULL(12) +#define UCTL_CTL_SS_POWER_EN BIT_ULL(14) +#define UCTL_CTL_H_CLKDIV_SEL GENMASK_ULL(26, 24) +#define UCTL_CTL_H_CLKDIV_RST BIT_ULL(28) +#define UCTL_CTL_H_CLK_EN BIT_ULL(30) +#define UCTL_CTL_REF_CLK_FSEL GENMASK_ULL(37, 32) +#define UCTL_CTL_REF_CLK_DIV2 BIT_ULL(38) +#define UCTL_CTL_REF_SSP_EN BIT_ULL(39) +#define UCTL_CTL_MPLL_MULTIPLIER GENMASK_ULL(46, 40) +#define UCTL_CTL_SSC_EN BIT_ULL(59) +#define UCTL_CTL_REF_CLK_SEL GENMASK_ULL(61, 60) + +#define UCTL_HOST_CFG 0xe0 +#define UCTL_HOST_CFG_PPC_ACTIVE_HIGH_EN BIT_ULL(24) +#define UCTL_HOST_CFG_PPC_EN BIT_ULL(25) + +#define UCTL_SHIM_CFG 0xe8 +#define UCTL_SHIM_CFG_CSR_ENDIAN_MODE GENMASK_ULL(1, 0) +#define UCTL_SHIM_CFG_DMA_ENDIAN_MODE GENMASK_ULL(9, 8) + +#define OCTEON_H_CLKDIV_SEL 8 +#define OCTEON_MIN_H_CLK_RATE 150000000 +#define OCTEON_MAX_H_CLK_RATE 300000000 + +static u8 clk_div[OCTEON_H_CLKDIV_SEL] = {1, 2, 4, 6, 8, 16, 24, 32}; + +static int dwc3_octeon_config_power(struct udevice *dev, void __iomem *base) +{ + u64 uctl_host_cfg; + u64 gpio_bit; + u32 gpio_pwr[3]; + int gpio, len, power_active_low; + const struct device_node *node = dev_np(dev); + int index = ((u64)base >> 24) & 1; + void __iomem *gpio_bit_cfg; + + if (of_find_property(node, "power", &len)) { + if (len == 12) { + dev_read_u32_array(dev, "power", gpio_pwr, 3); + power_active_low = gpio_pwr[2] & 0x01; + gpio = gpio_pwr[1]; + } else if (len == 8) { + dev_read_u32_array(dev, "power", gpio_pwr, 2); + power_active_low = 0; + gpio = gpio_pwr[1]; + } else { + printf("dwc3 controller clock init failure\n"); + return -EINVAL; + } + + gpio_bit_cfg = ioremap(CVMX_GPIO_BIT_CFGX(gpio), 0); + + if ((OCTEON_IS_MODEL(OCTEON_CN73XX) || + OCTEON_IS_MODEL(OCTEON_CNF75XX)) && gpio <= 31) { + gpio_bit = ioread64(gpio_bit_cfg); + gpio_bit |= GPIO_BIT_CFG_TX_OE; + gpio_bit &= ~GPIO_BIT_CFG_OUTPUT_SEL; + gpio_bit |= FIELD_PREP(GPIO_BIT_CFG_OUTPUT_SEL, + index == 0 ? 0x14 : 0x15); + iowrite64(gpio_bit, gpio_bit_cfg); + } else if (gpio <= 15) { + gpio_bit = ioread64(gpio_bit_cfg); + gpio_bit |= GPIO_BIT_CFG_TX_OE; + gpio_bit &= ~GPIO_BIT_CFG_OUTPUT_SEL; + gpio_bit |= FIELD_PREP(GPIO_BIT_CFG_OUTPUT_SEL, + index == 0 ? 0x14 : 0x19); + iowrite64(gpio_bit, gpio_bit_cfg); + } else { + gpio_bit_cfg = ioremap(CVMX_GPIO_XBIT_CFGX(gpio), 0); + + gpio_bit = ioread64(gpio_bit_cfg); + gpio_bit |= GPIO_BIT_CFG_TX_OE; + gpio_bit &= ~GPIO_BIT_CFG_OUTPUT_SEL; + gpio_bit |= FIELD_PREP(GPIO_BIT_CFG_OUTPUT_SEL, + index == 0 ? 0x14 : 0x19); + iowrite64(gpio_bit, gpio_bit_cfg); + } + + /* Enable XHCI power control and set if active high or low. */ + uctl_host_cfg = ioread64(base + UCTL_HOST_CFG); + uctl_host_cfg |= UCTL_HOST_CFG_PPC_EN; + if (power_active_low) + uctl_host_cfg &= ~UCTL_HOST_CFG_PPC_ACTIVE_HIGH_EN; + else + uctl_host_cfg |= UCTL_HOST_CFG_PPC_ACTIVE_HIGH_EN; + iowrite64(uctl_host_cfg, base + UCTL_HOST_CFG); + + /* Wait for power to stabilize */ + mdelay(10); + } else { + /* Disable XHCI power control and set if active high. */ + uctl_host_cfg = ioread64(base + UCTL_HOST_CFG); + uctl_host_cfg &= ~UCTL_HOST_CFG_PPC_EN; + uctl_host_cfg &= ~UCTL_HOST_CFG_PPC_ACTIVE_HIGH_EN; + iowrite64(uctl_host_cfg, base + UCTL_HOST_CFG); + dev_warn(dev, "dwc3 controller clock init failure.\n"); + } + + return 0; +} + +static int dwc3_octeon_clocks_start(struct udevice *dev, void __iomem *base) +{ + u64 uctl_ctl; + int ref_clk_sel = 2; + u64 div; + u32 clock_rate; + int mpll_mul; + int i; + u64 h_clk_rate; + void __iomem *uctl_ctl_reg = base; + const char *ss_clock_type; + const char *hs_clock_type; + + i = dev_read_u32(dev, "refclk-frequency", &clock_rate); + if (i) { + printf("No UCTL "refclk-frequency"\n"); + return -EINVAL; + } + + ss_clock_type = dev_read_string(dev, "refclk-type-ss"); + if (!ss_clock_type) { + printf("No UCTL "refclk-type-ss"\n"); + return -EINVAL; + } + + hs_clock_type = dev_read_string(dev, "refclk-type-hs"); + if (!hs_clock_type) { + printf("No UCTL "refclk-type-hs"\n"); + return -EINVAL; + } + + if (strcmp("dlmc_ref_clk0", ss_clock_type) == 0) { + if (strcmp(hs_clock_type, "dlmc_ref_clk0") == 0) { + ref_clk_sel = 0; + } else if (strcmp(hs_clock_type, "pll_ref_clk") == 0) { + ref_clk_sel = 2; + } else { + printf("Invalid HS clock type %s, using pll_ref_clk\n", + hs_clock_type); + } + } else if (strcmp(ss_clock_type, "dlmc_ref_clk1") == 0) { + if (strcmp(hs_clock_type, "dlmc_ref_clk1") == 0) { + ref_clk_sel = 1; + } else if (strcmp(hs_clock_type, "pll_ref_clk") == 0) { + ref_clk_sel = 3; + } else { + printf("Invalid HS clock type %s, using pll_ref_clk\n", + hs_clock_type); + ref_clk_sel = 3; + } + } else { + printf("Invalid SS clock type %s, using dlmc_ref_clk0\n", + ss_clock_type); + } + + if ((ref_clk_sel == 0 || ref_clk_sel == 1) && clock_rate != 100000000) { + printf("Invalid UCTL clock rate of %u, using 100000000\n", + clock_rate); + } + + /* + * Step 1: Wait for all voltages to be stable...that surely + * happened before starting the kernel. SKIP + */ + + /* Step 2: Select GPIO for overcurrent indication, if desired. SKIP */ + + /* Step 3: Assert all resets. */ + uctl_ctl = ioread64(uctl_ctl_reg); + uctl_ctl |= UCTL_CTL_UCTL_RST | UCTL_CTL_UAHC_RST | UCTL_CTL_UPHY_RST; + iowrite64(uctl_ctl, uctl_ctl_reg); + + /* Step 4a: Reset the clock dividers. */ + uctl_ctl = ioread64(uctl_ctl_reg); + uctl_ctl |= UCTL_CTL_H_CLKDIV_RST; + iowrite64(uctl_ctl, uctl_ctl_reg); + + /* Step 4b: Select controller clock frequency. */ + for (div = ARRAY_SIZE(clk_div) - 1; div >= 0; div--) { + h_clk_rate = gd->bus_clk / clk_div[div]; + if (h_clk_rate <= OCTEON_MAX_H_CLK_RATE && + h_clk_rate >= OCTEON_MIN_H_CLK_RATE) + break; + } + uctl_ctl = ioread64(uctl_ctl_reg); + uctl_ctl &= ~UCTL_CTL_H_CLKDIV_SEL; + uctl_ctl |= FIELD_PREP(UCTL_CTL_H_CLKDIV_SEL, div); + uctl_ctl |= UCTL_CTL_H_CLK_EN; + iowrite64(uctl_ctl, uctl_ctl_reg); + uctl_ctl = ioread64(uctl_ctl_reg); + if (div != FIELD_GET(UCTL_CTL_H_CLKDIV_SEL, uctl_ctl) || + !(uctl_ctl & UCTL_CTL_H_CLK_EN)) { + printf("dwc3 controller clock init failure\n"); + return -EINVAL; + } + + /* Step 4c: Deassert the controller clock divider reset. */ + uctl_ctl = ioread64(uctl_ctl_reg); + uctl_ctl &= ~UCTL_CTL_H_CLKDIV_RST; + iowrite64(uctl_ctl, uctl_ctl_reg); + + /* Step 5a: Reference clock configuration. */ + uctl_ctl = ioread64(uctl_ctl_reg); + uctl_ctl &= ~UCTL_CTL_REF_CLK_SEL; + uctl_ctl |= FIELD_PREP(UCTL_CTL_REF_CLK_SEL, ref_clk_sel); + uctl_ctl &= ~UCTL_CTL_REF_CLK_FSEL; + uctl_ctl |= FIELD_PREP(UCTL_CTL_REF_CLK_FSEL, 0x07); + uctl_ctl &= ~UCTL_CTL_REF_CLK_DIV2; + + switch (clock_rate) { + default: + printf("Invalid ref_clk %u, using 100000000 instead\n", + clock_rate); + fallthrough; + case 100000000: + mpll_mul = 0x19; + if (ref_clk_sel < 2) { + uctl_ctl &= ~UCTL_CTL_REF_CLK_FSEL; + uctl_ctl |= FIELD_PREP(UCTL_CTL_REF_CLK_FSEL, 0x27); + } + break; + case 50000000: + mpll_mul = 0x32; + break; + case 125000000: + mpll_mul = 0x28; + break; + } + uctl_ctl &= ~UCTL_CTL_MPLL_MULTIPLIER; + uctl_ctl |= FIELD_PREP(UCTL_CTL_MPLL_MULTIPLIER, mpll_mul); + + /* Step 5b: Configure and enable spread-spectrum for SuperSpeed. */ + uctl_ctl |= UCTL_CTL_SSC_EN; + + /* Step 5c: Enable SuperSpeed. */ + uctl_ctl |= UCTL_CTL_REF_SSP_EN; + + /* Step 5d: Configure PHYs. SKIP */ + + /* Step 6a & 6b: Power up PHYs. */ + uctl_ctl |= UCTL_CTL_HS_POWER_EN; + uctl_ctl |= UCTL_CTL_SS_POWER_EN; + iowrite64(uctl_ctl, uctl_ctl_reg); + + /* Step 7: Wait 10 controller-clock cycles to take effect. */ + udelay(10); + + /* Step 8a: Deassert UCTL reset signal. */ + uctl_ctl = ioread64(uctl_ctl_reg); + uctl_ctl &= ~UCTL_CTL_UCTL_RST; + iowrite64(uctl_ctl, uctl_ctl_reg); + + /* Step 8b: Wait 10 controller-clock cycles. */ + udelay(10); + + /* Step 8c: Setup power-power control. */ + if (dwc3_octeon_config_power(dev, base)) { + printf("Error configuring power\n"); + return -EINVAL; + } + + /* Step 8d: Deassert UAHC reset signal. */ + uctl_ctl = ioread64(uctl_ctl_reg); + uctl_ctl &= ~UCTL_CTL_UAHC_RST; + iowrite64(uctl_ctl, uctl_ctl_reg); + + /* Step 8e: Wait 10 controller-clock cycles. */ + udelay(10); + + /* Step 9: Enable conditional coprocessor clock of UCTL. */ + uctl_ctl = ioread64(uctl_ctl_reg); + uctl_ctl |= UCTL_CTL_SCLK_EN; + iowrite64(uctl_ctl, uctl_ctl_reg); + + /* Step 10: Set for host mode only. */ + uctl_ctl = ioread64(uctl_ctl_reg); + uctl_ctl &= ~UCTL_CTL_DRD_MODE; + iowrite64(uctl_ctl, uctl_ctl_reg); + + return 0; +} + +static void dwc3_octeon_set_endian_mode(void __iomem *base) +{ + u64 shim_cfg; + + shim_cfg = ioread64(base + UCTL_SHIM_CFG); + shim_cfg &= ~UCTL_SHIM_CFG_CSR_ENDIAN_MODE; + shim_cfg |= FIELD_PREP(UCTL_SHIM_CFG_CSR_ENDIAN_MODE, 1); + shim_cfg &= ~UCTL_SHIM_CFG_DMA_ENDIAN_MODE; + shim_cfg |= FIELD_PREP(UCTL_SHIM_CFG_DMA_ENDIAN_MODE, 1); + iowrite64(shim_cfg, base + UCTL_SHIM_CFG); +} + +static void dwc3_octeon_phy_reset(void __iomem *base) +{ + u64 uctl_ctl; + + uctl_ctl = ioread64(base); + uctl_ctl &= ~UCTL_CTL_UPHY_RST; + iowrite64(uctl_ctl, base); +} + +static int octeon_dwc3_glue_probe(struct udevice *dev) +{ + void __iomem *base; + + base = dev_remap_addr(dev); + if (IS_ERR(base)) + return PTR_ERR(base); + + dwc3_octeon_clocks_start(dev, base); + dwc3_octeon_set_endian_mode(base); + dwc3_octeon_phy_reset(base); + + return 0; +} + +static int octeon_dwc3_glue_bind(struct udevice *dev) +{ + ofnode node, dwc3_node; + + /* Find snps,dwc3 node from subnode */ + dwc3_node = ofnode_null(); + ofnode_for_each_subnode(node, dev->node) { + if (ofnode_device_is_compatible(node, "snps,dwc3")) + dwc3_node = node; + } + + if (!ofnode_valid(dwc3_node)) { + printf("Can't find dwc3 subnode for %s\n", dev->name); + return -ENODEV; + } + + return dm_scan_fdt_dev(dev); +} + +static int octeon_dwc3_glue_remove(struct udevice *dev) +{ + return 0; +} + +static const struct udevice_id octeon_dwc3_glue_ids[] = { + { .compatible = "cavium,octeon-7130-usb-uctl" }, + { } +}; + +U_BOOT_DRIVER(dwc3_octeon_glue) = { + .name = "dwc3_octeon_glue", + .id = UCLASS_NOP, + .of_match = octeon_dwc3_glue_ids, + .probe = octeon_dwc3_glue_probe, + .remove = octeon_dwc3_glue_remove, + .bind = octeon_dwc3_glue_bind, + .flags = DM_FLAG_ALLOC_PRIV_DMA, +};