From: Sascha Hauer s.hauer@pengutronix.de
Currently we have no data structure to fully describe a NAND timing. We only have struct nand_sdr_timings for NAND timings in SDR mode, but nothing for DDR mode and also no container to store both types of timing. This patch adds struct nand_data_interface which stores the timing type and a union of different timings. This can be used to pass to drivers in order to configure the timing. Add kerneldoc for struct nand_sdr_timings while touching it anyway.
Signed-off-by: Sascha Hauer s.hauer@pengutronix.de Signed-off-by: Boris Brezillon boris.brezillon@free-electrons.com [Linux commit: eee64b700e26b9bcc6fce024681c31f5e12271fc] Signed-off-by: Masahiro Yamada yamada.masahiro@socionext.com
---
include/linux/mtd/nand.h | 166 +++++++++++++++++++++++++++++++++-------------- 1 file changed, 117 insertions(+), 49 deletions(-)
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index df00fd1..e321e3e 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -585,6 +585,123 @@ struct nand_buffers { };
/** + * struct nand_sdr_timings - SDR NAND chip timings + * + * This struct defines the timing requirements of a SDR NAND chip. + * These information can be found in every NAND datasheets and the timings + * meaning are described in the ONFI specifications: + * www.onfi.org/~/media/ONFI/specs/onfi_3_1_spec.pdf (chapter 4.15 Timing + * Parameters) + * + * All these timings are expressed in picoseconds. + * + * @tALH_min: ALE hold time + * @tADL_min: ALE to data loading time + * @tALS_min: ALE setup time + * @tAR_min: ALE to RE# delay + * @tCEA_max: CE# access time + * @tCEH_min: CE# high hold time + * @tCH_min: CE# hold time + * @tCHZ_max: CE# high to output hi-Z + * @tCLH_min: CLE hold time + * @tCLR_min: CLE to RE# delay + * @tCLS_min: CLE setup time + * @tCOH_min: CE# high to output hold + * @tCS_min: CE# setup time + * @tDH_min: Data hold time + * @tDS_min: Data setup time + * @tFEAT_max: Busy time for Set Features and Get Features + * @tIR_min: Output hi-Z to RE# low + * @tITC_max: Interface and Timing Mode Change time + * @tRC_min: RE# cycle time + * @tREA_max: RE# access time + * @tREH_min: RE# high hold time + * @tRHOH_min: RE# high to output hold + * @tRHW_min: RE# high to WE# low + * @tRHZ_max: RE# high to output hi-Z + * @tRLOH_min: RE# low to output hold + * @tRP_min: RE# pulse width + * @tRR_min: Ready to RE# low (data only) + * @tRST_max: Device reset time, measured from the falling edge of R/B# to the + * rising edge of R/B#. + * @tWB_max: WE# high to SR[6] low + * @tWC_min: WE# cycle time + * @tWH_min: WE# high hold time + * @tWHR_min: WE# high to RE# low + * @tWP_min: WE# pulse width + * @tWW_min: WP# transition to WE# low + */ +struct nand_sdr_timings { + u32 tALH_min; + u32 tADL_min; + u32 tALS_min; + u32 tAR_min; + u32 tCEA_max; + u32 tCEH_min; + u32 tCH_min; + u32 tCHZ_max; + u32 tCLH_min; + u32 tCLR_min; + u32 tCLS_min; + u32 tCOH_min; + u32 tCS_min; + u32 tDH_min; + u32 tDS_min; + u32 tFEAT_max; + u32 tIR_min; + u32 tITC_max; + u32 tRC_min; + u32 tREA_max; + u32 tREH_min; + u32 tRHOH_min; + u32 tRHW_min; + u32 tRHZ_max; + u32 tRLOH_min; + u32 tRP_min; + u32 tRR_min; + u64 tRST_max; + u32 tWB_max; + u32 tWC_min; + u32 tWH_min; + u32 tWHR_min; + u32 tWP_min; + u32 tWW_min; +}; + +/** + * enum nand_data_interface_type - NAND interface timing type + * @NAND_SDR_IFACE: Single Data Rate interface + */ +enum nand_data_interface_type { + NAND_SDR_IFACE, +}; + +/** + * struct nand_data_interface - NAND interface timing + * @type: type of the timing + * @timings: The timing, type according to @type + */ +struct nand_data_interface { + enum nand_data_interface_type type; + union { + struct nand_sdr_timings sdr; + } timings; +}; + +/** + * nand_get_sdr_timings - get SDR timing from data interface + * @conf: The data interface + */ +static inline const struct nand_sdr_timings * +nand_get_sdr_timings(const struct nand_data_interface *conf) +{ + if (conf->type != NAND_SDR_IFACE) + return ERR_PTR(-EINVAL); + + return &conf->timings.sdr; +} + +/** * struct nand_chip - NAND Private Flash Chip Data * @mtd: MTD device registered to the MTD framework * @IO_ADDR_R: [BOARDSPECIFIC] address to read the 8 I/O lines of the @@ -1059,55 +1176,6 @@ void nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len); void nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len); uint8_t nand_read_byte(struct mtd_info *mtd);
-/* - * struct nand_sdr_timings - SDR NAND chip timings - * - * This struct defines the timing requirements of a SDR NAND chip. - * These informations can be found in every NAND datasheets and the timings - * meaning are described in the ONFI specifications: - * www.onfi.org/~/media/ONFI/specs/onfi_3_1_spec.pdf (chapter 4.15 Timing - * Parameters) - * - * All these timings are expressed in picoseconds. - */ - -struct nand_sdr_timings { - u32 tALH_min; - u32 tADL_min; - u32 tALS_min; - u32 tAR_min; - u32 tCEA_max; - u32 tCEH_min; - u32 tCH_min; - u32 tCHZ_max; - u32 tCLH_min; - u32 tCLR_min; - u32 tCLS_min; - u32 tCOH_min; - u32 tCS_min; - u32 tDH_min; - u32 tDS_min; - u32 tFEAT_max; - u32 tIR_min; - u32 tITC_max; - u32 tRC_min; - u32 tREA_max; - u32 tREH_min; - u32 tRHOH_min; - u32 tRHW_min; - u32 tRHZ_max; - u32 tRLOH_min; - u32 tRP_min; - u32 tRR_min; - u64 tRST_max; - u32 tWB_max; - u32 tWC_min; - u32 tWH_min; - u32 tWHR_min; - u32 tWP_min; - u32 tWW_min; -}; - /* get timing characteristics from ONFI timing mode. */ const struct nand_sdr_timings *onfi_async_timing_mode_to_sdr_timings(int mode);