On Mon, Aug 30, 2021 at 10:40 AM Adam Ford aford173@gmail.com wrote:
There are three boards from Beacon, RZ/G2 M/N/H which all use the same board file, but different device trees. Add code to automatically select the proper device tree based on the CPU type.
Signed-off-by: Adam Ford aford173@gmail.com
Marek,
I was wondering if you had any feedback on this series. You asked if I could consolidate all three of my RZ/G2 boards to reduce the amount of duplicated code, so this series attempts to do that.
adam
diff --git a/board/beacon/beacon-rzg2m/beacon-rzg2m.c b/board/beacon/beacon-rzg2m/beacon-rzg2m.c index c12ff77fb2..b3521fcbc1 100644 --- a/board/beacon/beacon-rzg2m/beacon-rzg2m.c +++ b/board/beacon/beacon-rzg2m/beacon-rzg2m.c @@ -36,3 +36,19 @@ void reset_cpu(void) { writel(RST_CODE, RST_CA57RESCNT); }
+#if IS_ENABLED(CONFIG_MULTI_DTB_FIT) +int board_fit_config_name_match(const char *name) +{
if (!strcmp(rzg_get_cpu_name(), "R8A774A1") && !strcmp(name, "r8a774a1-beacon-rzg2m-kit"))return 0;if (!strcmp(rzg_get_cpu_name(), "R8A774B1") && !strcmp(name, "r8a774b1-beacon-rzg2n-kit"))return 0;if (!strcmp(rzg_get_cpu_name(), "R8A774E1") && !strcmp(name, "r8a774e1-beacon-rzg2h-kit"))return 0;return -1;+}
+#endif
2.25.1