Re: [U-Boot] U-Boot hangs when board is attached to BDI2000

Hi Matthias,

When I issue a "reset run" within the BDI shell, the target boots as expected, but when I start the target with "reset halt" to debug it from the first instruction it behaves at described above.

Remeber that a "reset run" lets the CPU run from reset completely by itself, this essentially bypassing the init list statements in the BDI config file. A "reset halt" on the other hand will "execute" them. So it is very likely that you have a discrepancy between whet U-Boot initlaizes and what your bdi init file does. One of such things is for example if the init file moves immrbase, mbarbase or whatever it is called on the mpc85xx and U-Boot later on tries to do the same again.

Cheers Detlev