Since SPI_TX_* are spi_slave{} members so use spi protocol notation instead spi flash programming, like
SPI_TX_BP => SPI_TX_BYTE SPI_TX_QPP => SPI_TX_QUAD
Cc: Bin Meng bmeng.cn@gmail.com Cc: Simon Glass sjg@chromium.org Signed-off-by: Jagan Teki jteki@openedev.com --- Changes for v3: - none Changes for v2: - none
drivers/mtd/spi/sf_probe.c | 2 +- drivers/mtd/spi/spi_flash.c | 4 ++-- drivers/spi/ich.c | 2 +- include/spi.h | 4 ++-- 4 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/mtd/spi/sf_probe.c b/drivers/mtd/spi/sf_probe.c index 3519ffd..daa1d5b 100644 --- a/drivers/mtd/spi/sf_probe.c +++ b/drivers/mtd/spi/sf_probe.c @@ -128,7 +128,7 @@ static int spi_flash_std_write(struct udevice *dev, u32 offset, size_t len,
#if defined(CONFIG_SPI_FLASH_SST) if (flash->flags & SNOR_F_SST_WR) { - if (flash->spi->mode & SPI_TX_BP) + if (flash->spi->mode & SPI_TX_BYTE) return sst_write_bp(flash, offset, len, buf); else return sst_write_wp(flash, offset, len, buf); diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c index 836aad9..513d9ad 100644 --- a/drivers/mtd/spi/spi_flash.c +++ b/drivers/mtd/spi/spi_flash.c @@ -968,7 +968,7 @@ int spi_flash_scan(struct spi_flash *flash) flash->write = spi_flash_cmd_write_ops; #if defined(CONFIG_SPI_FLASH_SST) if (flash->flags & SNOR_F_SST_WR) { - if (spi->mode & SPI_TX_BP) + if (spi->mode & SPI_TX_BYTE) flash->write = sst_write_bp; else flash->write = sst_write_wp; @@ -1042,7 +1042,7 @@ int spi_flash_scan(struct spi_flash *flash) }
/* Not require to look for fastest only two write cmds yet */ - if (params->flags & WR_QPP && spi->mode & SPI_TX_QPP) + if (params->flags & WR_QPP && spi->mode & SPI_TX_QUAD) flash->write_cmd = CMD_QUAD_PAGE_PROGRAM; else /* Go for default supported write cmd */ diff --git a/drivers/spi/ich.c b/drivers/spi/ich.c index 64322dd..d11132c 100644 --- a/drivers/spi/ich.c +++ b/drivers/spi/ich.c @@ -753,7 +753,7 @@ static int ich_spi_child_pre_probe(struct udevice *dev) */ if (plat->ich_version == 7) { slave->op_mode_rx = SPI_OPM_RX_AS; - slave->mode = SPI_TX_BP; + slave->mode = SPI_TX_BYTE; }
return 0; diff --git a/include/spi.h b/include/spi.h index 67521721..b9a6e6f 100644 --- a/include/spi.h +++ b/include/spi.h @@ -23,8 +23,8 @@ #define SPI_LOOP 0x20 /* loopback mode */ #define SPI_SLAVE 0x40 /* slave mode */ #define SPI_PREAMBLE 0x80 /* Skip preamble bytes */ -#define SPI_TX_BP 0x100 /* transmit with 1 wire byte */ -#define SPI_TX_QPP 0x200 /* transmit with 4 wires */ +#define SPI_TX_BYTE 0x100 /* transmit with 1 wire byte */ +#define SPI_TX_QUAD 0x200 /* transmit with 4 wires */
/* SPI transfer flags */ #define SPI_XFER_BEGIN 0x01 /* Assert CS before transfer */